Reversal of elution order of N‐(2,4‐dinitrophenyl)‐proline and N‐(2,4‐dinitrophenyl)‐serine in HPLC by BSA chiral stationary phase

N‐(2,4‐dinitrophenyl)‐proline and N‐(2,4‐dinitrophenyl)‐serine were enantiomerically resolved on the BSA chiral stationary phase by HPLC in reversed‐phase mode. Effects of chromatographic conditions on enantioseparation and elution order have been investigated in detail. For these two samples, reversal of enantiomer elution order was observed by changing buffer pH, the content of acetonitrile, or alcohol modifiers in mobile phase, which is firstly reported in the BSA chiral stationary phase studies. More interestingly, combined effect between buffer pH and the content of acetonitrile was also observed. In addition, coelution range of enantiomers varied along with the content of acetonitrile in mobile phase.     

Ru-catalyzed highly enantioselective hydrogenation of α-keto Weinreb amides

Asymmetric hydrogenation of α-keto Weinreb amides has been realized with [Ru((S)-Sunphos)(benzene)Cl]Cl as the catalyst and CeCl 3·7H2O as the additive.A series of enantiopure α-hydroxy Weinreb amides(up to 97% ee) have been obtained.Catalytic amount of CeCl3·7H2O is essential for the high reactivity and enantioselectivity and the ratio of CeCl3·7H2O to [Ru((S)-Sunphos)(benzene)Cl]Cl plays an important role in the hydrogenation reaction.     

Efficiency improvement of flexible dye-sensitized solar cells by introducing mesoporous TiO2 microsphere

Mesoporous TiO2microsphere(MTM)was synthesized via a simple solution route and then mixed with commercial TiO2(P25)to form highly homogeneous and stable TiO2colloid by simple hydrothermal treatment.The TiO2colloid was coated onto the plastic conductive substrate to prepare mesoporous TiO2film for flexible dye-sensitized solar cells(DSSCs)by low-temperature heat treatment.The influence of MTM content on the physicochemical properties of the flexible TiO2film was characterized by scanning electron microscope,transmission electron microscopy,X-ray diffraction,energy-dispersive X-ray spectrometer,N2adsorption-desorption isotherms,UV–vis absorption and diffuse reflectance spectra.It is revealed that with increasing the MTM content,the dye-loading capability of TiO2film and light-harvesting efficiency of flexible DSSCs are improved due to MTM having high surface area and acting as a light scattering center,respectively,resulting in the enhancement of photocurrent of flexible DSSCs.However,more and larger cracks having negative effect on the performances of flexible DSSCs are formed simultaneously.Under the optimal condition with MTM content of 20%,a flexible DSSC with overall light-to-electric energy conversion efficiency of 2.74%is achieved under a simulated solar light irradiation of 100 mW cm 2(AM 1.5),with 26%improvement in comparison with DSSCs based on P25 alone.     

Study of the Phase Transformation of Single Particles of Ga2O3 by UV‐Raman Spectroscopy and High‐Resolution TEM

By taking advantage of UV‐Raman spectroscopy and high‐resolution TEM (HRTEM), combined with the focused ion beam (FIB) technique, the transformation from GaOOH into α‐Ga₂O₃ and then into β‐Ga₂O₃ was followed. We found that the stepwise transformations took place from the surface region before developing into the bulk of single particles without particle agglomeration and growth. During the transformation from GaOOH into α‐Ga₂O₃, the elimination of water vapor through the dehydroxylation of GaOOH resulted in the formation of micropores in the single particles, whilst maintaining their particle size. For the phase transformation from α‐Ga₂O₃ into β‐Ga₂O₃, the nucleation of β‐Ga₂O₃ was found to occur at the surface defects and this process could be retarded by occupying these defects with a small amount of La₂O₃. By finely controlling the process of the phase transformation, the β‐Ga₂O₃ domains gradually developed from the surface into the bulk of the single particles without particle agglomeration. Therefore, the surface structure of the α‐Ga₂O₃ single particles can be easily tuned and a particle with an α@β core–shell phase structure has been obtained.     

Characterization of Nineteen Impurities in Roxithromycin by HPLC/TOF and Ion Trap Mass Spectrometry

Nineteen impurities in roxithromycin drug substance made in China were separated and identified by HPLC–MSⁿ (TOF and TRAP) for the further improvement of official monographs in Pharmacopoeias. The fragmentation patterns and structural assignment of these impurities were studied. The column was Shim VP-ODS (250 × 4.6 mm, 5 μm). The mobile phase was 10 m mol L⁻¹ ammonium acetate and 0.1 % formic acid aqueous solution-acetonitrile (62.5:37.5). In positive mode, full scan LC–MS was first performed to obtain the m/z value of the protonated molecules and formulas of all detected peaks on Agilent 6538Q TOF high resolution mass spectrometer. LC–MS-MS and LC–MS-MS–MS were then carried out on the compounds of interest on AB SCIEX 4000 Q TRAP™ composite triple quadrupole/linear ion trap tandem mass spectrometer. The complete fragmentation patterns of nineteen impurities were studied and used to obtain information about the structures of these impurities. The structures of nineteen impurities in roxithromycin drug substance were deduced based on the HPLC–MSⁿ data, in which nine impurities were novel impurities.

     

Nickel-catalyzed synthesis of 9-monoalkylated fluorenes from 9-fluorenone hydrazone and alcohols

A practical protocol was disclosed for the nickel-catalyzed C-alkylation of 9-fluorenone hydrazone with alcohols using t-BuOK as the base, and 9-monoalkylated fluorene derivatives were obtained in good yields under the benign conditions.     

Novel Synthesis of Aza-phthalimidine Hydroxylactams

A novel and convenient synthetic route for preparing aza-phthalimidine hydroxylactams (5a–j) by N-bromosuccinimide (NBS) was developed. This method involved the substitution reactions of substrates (3a–j) with NBS via unstable intermediate bromides (4a–j) rapidly hydrolyzed into hydroxyl products in the course of the workup process.     

Aggregation modes of the spin mono-labeled tylopeptin B and heptaibin peptaibiotics in frozen solutions of weak polarity as studied by PELDOR spectroscopy

The X band PELDOR spectroscopy was used to investigate the magnetic dipole-dipole interactions in glassy solutions of nitroxide mono-labeled tylopeptin B and heptaibin peptaibiotics at 77 K. Specifically, a study was performed of the tylopeptin B peptides labeled at either position 3, 8, or 13, denoted as T3, T8, and T13, respectively. The heptaibin analogs labeled at either position 2 or 14, denoted as H2 and H14, respectively, were also investigated. It was shown that in frozen glassy peptide solutions in methanol, the spin labels are randomly distributed over the solvent volume. This result points to the absence of specific dipolar interactions between the peptides under these conditions. However, peptide aggregation was detected in weakly polar methanol/toluene environments. To study the properties of the resulting aggregates, we examined the depth of modulation for the PELDOR traces as a function of the concentration of the peptides in solution and the distances between the spin labels in the aggregates. Based on the concentration dependencies, the number of peptide molecules in the aggregates was estimated. We find that this value ranges from 2 to 3, depending on the position of the spin label in the peptide sequence. The combined analysis of the distance spectra and the number of peptide molecules in the aggregates allows us to suggest that dimer formation is the prevailing mode of self-association. In the case of spin-labeled tylopeptin B, the molecules in the dimer are head-to-head oriented. In addition, the distance spectra of the aggregates show that the C-termini of the molecules in the tylopeptin B dimer are more mobile than the Ntermini. This phenomenon leads to an increase in the spread of the distances between the nitroxides as the label position is approaching the peptide C-terminus. For heptaibin, we show that two forms of dimerization (head-to-head and head-to-tail) occur. Finally, in addition to dimers, aggregates containing 3 or 4 peptide molecules, which give broad lines in the distance spectra, are seen in solution.     

Non-enzymatic hydrogen peroxide sensor based on a gold electrode modified with granular cuprous oxide nanowires

Granular nanowires with a diameter of about 60 nm were fabricated from cuprous oxide (Cu₂O) by an electrochemical method using anodic aluminium oxide as the template. A non-enzymatic sensor for hydrogen peroxide (H₂O₂) was then developed on the basis of a gold electrode modified with Cu₂O nanowires and Nafion. The resulting sensor enables the determination of H₂O₂ with a sensitivity of 745 μA?mM^?1?cm^?2, over a wide linear range (0.25 μM to 5.0 mM), and with a low detection limit (0.12 μM). The results demonstrate that the use of such granular nanowires provides a promising tool for the design of non-enzymatic chemical sensors.