Liquid–liquid equilibria for the quaternary system methyl isobutyl ketone–water–phenol–hydroquinone

Liquid–liquid equilibria data of the quaternary system methyl isobutyl ketone (MIBK)–water–phenol–hydroquinone were measured at 25 °C under atmosphere pressure. The experimental data were correlated with the UNIQUAC and NRTL activity coefficient models on the base of the fixed binary interaction parameters that were obtained from two sub-ternary systems MIBK–water–phenol and MIBK–water–hydroquinone. The root mean square deviations (RMSD) show that the regressed results for the quaternary system were in good agreement with the experimental data for both UNIQUAC and NRTL models. The comparison between experimental and calculated distribution coefficient values of phenol and hydroquinone shows that a relative deviation of less than 5% is obtained.     

Formation and structure of a novel enediyne-RNA base covalent adduct

The structure of an unusual covalent adduct formed by thiol-activated neocarzinostatin chromophore (NCS-chrom) and a RNA-DNA hybrid having an overhang of four unpaired residues at the 3'-end of the RNA strand has been elucidated by MS and NMR spectroscopic analyses. Unlike previously characterized adducts formed by NCS-chrom on the sugar residue of the DNA target, this adduct has been found to be on one of the uracil bases in the RNA overhang. Covalent linkage is between C-6 of the post-activated NCS-chrom and C-5 of the uracil. A novel mechanism involving adduction of the NCS-chrom C-6 radical, generated by 2-mercaptoethanol activation, to C-5 of the uracil at the U9 position of the RNA 11-mer, oxidation by dioxygen, reduction by the thiol, and subsequent dehydration is proposed for adduct formation.     

Hybrid polymerization of iso-butyl vinyl ether

The radiation-induced hybrid polymerization in the presence of the N-alkoxypyridinium salt having relatively stable nonnucleophilic anion (PF₆⁻) has been investigated in the paper. Based on the analysis of experimental data and the GPC spectrum, the onium salts not only oxidize -alkoxyalkyl radicals, produced from IBVE in dichloromethane by irradiation, to the corresponding cations, but also give nonnucleophilic anions PF₆⁻ for the polymerization system. The experimental results clearly demonstrate that free radical and cationic polymerization mechanisms occurred simultaneously in IBVE/EMP⁺PF₆⁻/CH₂Cl₂ systems on irradiation with γ-ray.     

Modification of the halogen end groups of polystyrene prepared by ATRP

The stabilization modification of the halogen end groups of polystyrene prepared by atom transfer radical polymerization (ATRP) has been attempted. The reaction mechanism adopted is radical chain transfer reaction, and iso-propylbenzene is employed as not only the chain transfer agent but also the solvent. Moreover, Cu⁰ is used as the acceptor of the transformed halogen atom in some experiments. As evidenced by ¹H NMR analysis of the modified products, the halogen end group can really be converted into the much more stable carbon-hydrogen structure. When Cu⁰ is not used, the conversion of the halogen end groups rises rapidly during the early stage and the increase rate slows down after about 8 h reaction. In view of the influence of reaction temperature on the modification, the conversion increases almost exponentially with temperature in the range of 80-100 °C, and the increase rate slows down at higher temperature. ¹H NMR and SEC analyses prove that the modification reaction does not destroy the polymer backbone and the molecular weights remain almost the same as those of the unmodified samples. When Cu⁰ is introduced, the modification reaction proceeds much rapidly, the conversion of the halogen end groups rises almost linearly at the early stage and the nearly complete (>95%) dehalogenation of the polymeric chains is observed after only 12 h reaction. However, the molecular weights rise and the polydispersities become wider after the modification, which implies that the modification is accompanied with the couple termination of the polystyrene radicals besides chain transfer reaction. Furthermore, the couple termination can be restrained at some lower catalyst concentration. Indeed, the modified polymers show improved thermal stability, the initial weight loss temperatures is increased from 196 °C to 378 °C for the linear polystyrene and from 203 °C to 261 °C for the hyperbranched polystyrene.     

STUDY ON 1-HEXENE POLYMERIZATION BASED ON ZIEGLER-NATTA CATALYSTS WITH DOPED SUPPORT

A series of Ti/Mg supported catalysts are prepared by using ball-milled mixtures of MgCl2-ethanol adducts and NaCl as supports, and 1-hexene polymerizations catalyzed by the novel catalysts are studied. It is found that the molecular weight distribution of poly(1-hexene) becomes apparently narrower when catalysts with doped supports are used, indicating that changing the structure of the support is an effective way to regulate the active center distribution of heterogeneous Ziegler-Natta catalyst.     

硝酸钬水合物热分解及配位性质的研究

文献报道了Ho(NO_3)_3·5H_2O和Ho(NO_3)_3·(?)H_2O的热分解行为,但Ho(NO_3)_3·5H_2O脱水机理不清,Ho(NO_3)_3·4H_2O按文献[1]不能制出。六水、三水合物的热分解及与DMF的配位作用未见报道。     

氧缺位铁酸盐的制备及结构与还原行为的研究

在３５８Ｋ下用２００ｍｌ／ｍｉｎ的空气氧化碱性悬浮液合成了ＭＦｅ_２Ｏ_（４＋δ）（δ≥０，Ｍ＝Ｆｅ、Ｃｏ、Ｎｉ、Ｍｎ），并在５７３Ｋ下用４０ｍｌ／ｍｉｎ的Ｈ_２还原ＭＦｅ_２Ｏ_（４＋δ）制备了氧缺位铁酸盐ＭＦｅ_２Ｏ_（４－δ）（δ＞０）。用ＸＲＤ、Ｍｓｓｂａｕｅｒ谱等测试方法对铁酸盐的结构进行了表征，考察了铁酸盐的组成及第二金属组分（Ｃｏ、Ｎｉ、Ｍｎ）对铁酸盐还原性能的影响。在Ｈ_２还原３ｈ内，铁酸盐氧缺位程度随还原时间增加而增大，晶格常数也相应增大；５ｈ以上，铁酸盐将被还原为ＭＯ－ＦｅＯ或α－Ｆｅ，晶格常数几乎不变。按Ｆｅ、Ｃｏ、Ｎｉ、Ｍｎ顺序，ＭＯ与ＦｅＯ的相互作用能力、ＭＯ－ＦｅＯ固溶体的稳定性及铁酸盐还原为ＭＯ－ＦｅＯ的能力均增强，ＭＯ－ＦｅＯ进一步还原为α－Ｆｅ的能力却减弱。     

流动注射—在线分离富集与原子光谱检测联用技术

现代分析化学发展的重要特征之一是分析方法从离线/手动操作向在线/自动操作方向转化。流动注射(FI)作为非均匀和非平衡状态下的溶液处理和微量进样技术,是实现上述转化的有力工具。FI可与不同的分离富集和检测手段结合,具有很强适应性和实用性。在众多联用技术中,FI—在线分离富集与原子光谱检测联用技术特别受到分析化学界的青睐。这种联用不仅可以克服常规离线操作费时、污染环境和试样/试剂消耗大的缺点,而且可大大提高分析效率,显著改善分析方法的灵敏度与选择性,进行多种成分同时检测(对ICP—AES,DCP—AES     

四（2,4—二叔戊基苯氧基）酞菁铜（Ⅱ）的合成及其LB膜

合成了标题酞菁铜衍生物,并通过元素分析,高压液相色谱,紫外光谱,红外光谱,核磁共振谱,电镜,顺磁共振谱及质谱加以确认。该化合物在稀氯仿溶液和LB膜中各以单,双分子缔合的形式存在。Z型沉积形成的单层LB膜对氨气有很高的灵敏度和选择性。     

Synthesis and Characterization of Novel Polyimides Based on Pyridine-containing Diamine

A new aromatic diamine monomer containing pyridine unit, 2,6-bis （4-aminophenoxy- 4＇-benzoyl）pyridine（BABP）, was synthesized in three steps, starting from 2,6-pyridinedicarboxyl chloride. A series of novel pyridine-containing polyimides were prepared v/a the polycondensation of BABP with various aromatic dianhydrides through poly（amic acid） precursors, and thermal or chemical imidization of the precursors. The polyimides exhibit desirable properties, e.g., good solubility in N-methyl-2-pyrrolidone and m-cresol, excellent thermal stability and film-forming capability, as well as high inherent viscosity, indicating high molecular weight.