Asymmetric Michael addition promoted by (R,R)-trans-1,2-diaminocyclohexane in ionic liquids

In tetrafluoroborate based ionic liquids fair yields and enantiomeric excesses up to 91% were obtained in the Michael addition of ethyl cyclohexanone-2-carboxylate to methyl vinyl ketone, using (R,R)-trans-1,2-diaminocyclohexane as chiral auxiliary (37% mol/mol with respect to the donor). The presence of catalytic amounts of metal sources [Ni(OAc)₂ · 4H₂O, Co(acac)₂, FeCl₃ · 6H₂O, LaCl₃, Cu(OAc)₂ · H₂O] did not improve the activity, and, in some instances, caused a drop of enantioselectivity. Reactions carried out in the absence of any metal and with a Michael donor/diamine molar ratio of 20 allowed us to ascertain that the reaction can be performed catalytically.     

Are azobenzenophanes rotation-restricted?

We simulated the photoisomerization dynamics of an azobenzenophane with a semiclassical surface hopping approach and a semiempirical reparametrized quantum mechanics/molecular mechanics Hamiltonian. Only one of the two azobenzene chromophores in the molecule is taken into account quantum mechanically: the other one is treated by molecular mechanics. Both n-->pi* and pi-->pi* excitations are considered. Our results show that the photoisomerization reaction mainly involves the rotation around the N=N double bond. The excited state relaxation features are in qualitative agreement with experimental time-resolved fluorescence results.     

Cathodic chloride extraction treatment of a late bronze-age artifact affected by bronze disease in room-temperature ionic-liquid 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (EMI-TFSI)

This paper concentrates on a novel approach to the electrochemical treatment of bronze disease, based on the use of room-temperature ionic liquids (RTIL). In particular, we employed 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide as the electrolyte for the galvanostatic cathodic treatment of a late bronze-age artifact that had been exposed to marine environment during its history, dating back to ca. 1100 B.C. After an accurate metallographic and structural analysis of the as-found object—proving, among other findings, that bronze disease is essentially related to the presence of nantokite locked inside subsurface pits of typical equivalent diameter of several hundred micrometers, we subjected it to optimal electrochemical conditions, showing—on the basis of X-ray diffraction—that nantokite could be effectively removed and Cu(I) reduced to metallic Cu. Numerical computations in the full three-dimensional pit geometry, with realistic nonlinear electrochemical boundary conditions, provide the theoretical framework for the choice of RTIL—as opposed to aqueous solutions—and for the quantitative evaluation of Cl⁻ removal rates.     

Effect of compatibilization on thermal degradation kinetics of HDPE-based composites containing cellulose reinforcements

Dynamic thermogravimetric analysis under nitrogen flow was used to investigate the thermal decomposition process of high-density poly(ethylene) (HDPE)-based composites reinforced with cellulose fibers obtained from the recycling of multilayer carton scraps, as a function of the cellulose content and the compatibilization. The Friedman, Flynn–Wall–Ozawa, and Coats–Redfern methods were used to determine the apparent activation energy (E _a) of the thermal degradation of the cellulose component into the composites. E _a has been found dependent on the cellulose amount and on the cellulose/polymer matrix interfacial adhesion. In particular, it has been evidenced an increase of the cellulose thermal stability as a consequence of the improved interfacial adhesion between the components in NFR composites.     

Activation for catalysis of penicillin-binding protein 2a from methicillin-resistant Staphylococcus aureus by bacterial cell wall

Methicillin-resistant Staphylococcus aureus (MRSA) has acquired a unique penicillin-binding protein (PBP), PBP 2a, which has rendered the organism resistant to the action of all available beta-lactam antibiotics. The X-ray structure of PBP 2a shows the active site in a closed conformation, consistent with resistance to inhibition by beta-lactam antibiotics. However, it is known that PBP 2a avidly cross-links the S. aureus cell wall, which is its physiological function. It is shown herein that synthetic fragments of the bacterial cell wall bind in a saturable manner to PBP 2a and cause a conformational change in the protein that makes the active site more accessible to binding to a beta-lactam antibiotic. These observations and measurements point to a novel strategy by nature to keep the active site of PBP 2a sheltered from the inhibitory activity of the antibiotics, yet it becomes available to the polymeric cell wall by a requisite conformational change for the critical cell wall cross-linking reaction.     

Synthesis and Monoamine Oxidase Inhibitory Activity of 3-Substituted 5H-Indeno[1,2-c]pyridazines

The one-pot synthesis of nine 5H-indeno[1,2-c]pyridazines is described. These compounds are shown to be potent, reversible inhibitors of monoamine oxidase B (MAO-B) with little or no effect on monoamine oxidase A (MAO-A). Qualitative structure-activity relations indicate that the MAO-B inhibitory activity is strongly influenced by electronic and bulk properties of substitutents.     

Liquid chromatography/tandem mass spectrometry of unusual phenols from Yucca schidigera bark: comparison with other analytical techniques

Qualitative and quantitative analyses of phenolic compounds are of interest for both medicinal and food plants. In the present work, the phenolic fraction from Yucca schidigera, a plant bearing the GRAS (Generally Recognized as Safe) label approved by the US Food and Drug Administration, was studied. Crude extracts of Y. schidigera bark were investigated by liquid chromatography/UV spectrophotometry with diode-array detection, liquid chromatography/electrospray ionization mass spectrometry (LC/ESI-MS) and liquid chromatography/electrospray ionization tandem mass spectrometry (LC/ESI-MS/MS), in order to develop and optimize simple and rapid techniques to determine both stilbenes and yuccaols for the purposes of quality control of collected material. With optimal LC and MS conditions, stilbenes and yuccaols were quantified with all the proposed methods and the results were compared. Sensitivity was evaluated and the results indicated that MS/MS detection in the multiple reaction monitoring mode is easily applicable to this plant and allows the rapid and direct identification and quantification of these peculiar compounds in crude plant extracts.     

A Note on Black Hole Information Paradox in de Sitter Spacetimes

The possibility of stable or quasi-stable Planck mass black hole remnants as solution to the black hole information paradox is commonly believed phenomenologically unacceptable. Since we need a black hole remnant for every possible initial state, the number of remnants is expected to be infinite and that would lead to remnant pair production in any physical process with a total available energy roughly exceeding the Planck mass. In this note I point out that a positive cosmological constant of the Universe would naturally lead to an upper bound on the number of possible remnants.     

Random terpolymers for electroluminescent devices: Synthesis and characterization of new cyano‐containing poly(fluorenylene‐vinylene)s

The synthesis of new random poly(2,7‐fluorenylene‐vinylene)s was achieved by a Suzuki–Heck cascade polymerization reaction. The poly(fluorenylene‐vinylene) base structure was modified by the regio‐random incorporation of 1‐cyano‐2,5‐phenylene as electron withdrawing unit ( CN‐PFV1 ) and its properties were compared with terpolymers also embodying 1,4‐dioctyloxy‐2,5‐phenylene ( CN‐PFV2 ) or 3,6‐N‐octylcarbazole ( CN‐PFV3 ) as electron‐donating moieties. Thermal analysis revealed a high thermal stability (T_d > 389 °C) and the absence of glass transitions for all polymers. Cyclic voltammetry indicated a high electron affinity of the materials (2.96–3.21 eV) attributed to the presence of the cyano‐containing comonomer. In dilute solutions, the copolymers showed a broad green fluorescence with quantum yields ranging from 0.42 to 0.79, while in the solid state, a relatively narrow emission centered at ～ 560 nm, governed by the low‐energy segments within the π‐conjugated backbone, was observed. The electroluminescence properties of the materials were tested in OLED devices of ITO/PEDOT‐PSS/ CN‐PFV1‐3 /Ca/Al or ITO/PEDOT‐PSS/ CN‐PFV1‐3 /Alq₃/Ca/Al configurations, showing a bright green‐yellow emission that, in the case of CN‐PFV2 , reached 1403 cd/m² with efficiencies as high as 0.13 cd/A. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6051–6063, 2008     

ON THE ADM EQUATIONS FOR GENERAL RELATIVITY

The Arnowitt–Deser–Misner (ADM) evolution equations for the induced metric and the extrinsic-curvature tensor of the spacelike surfaces which foliate the space-time manifold in canonical general relativity are a first-order system of quasi-linear partial differential equations, supplemented by the constraint equations. Such equations are here mapped into another first-order system. In particular, an evolution equation for the trace of the extrinsic-curvature tensor K is obtained whose solution is related to a discrete spectral resolution of a three-dimensional elliptic operator of Laplace type. Interestingly, all nonlinearities of the original equations give rise to the potential term in . An example of this construction is given in the case of a closed Friedmann–Lemaitre–Robertson–Walker universe. Eventually, the ADM equations are re-expressed as a coupled first-order system for the induced metric and the trace-free part of K. Such a system is written in a form which clarifies how a set of first-order differential operators and their inverses, jointly with spectral resolutions of operators of Laplace type, contribute to solving, at least in principle, the original ADM system.