In situ disorder-order transformation in synthetic gallosilicate zeolites with the NAT topology

Here, we report that synthetic gallosilicate molecular sieves with the NAT topology and Si/Ga ratios close to but slightly higher than 1.50 undergo an in situ transformation under their crystallization conditions. The materials have been studied ex situ by using powder X-ray diffraction, elemental and thermal analyses, and multinuclear MAS NMR. The transformation is characterized by a change in the distribution of Si and Ga of the NAT framework, from a quite (but not completely) disordered phase to a very highly (but not completely) ordered one, accompanied by a change from tetragonal to orthorhombic symmetry. During most of the solution-mediated transformation, no noticeable signs of fresh precipitation, phase segregation, or changes in the chemical composition are detected. Intermediate materials show variations in the degree of Si-Ga ordering and orthorhombic distortion and are not physical mixtures of the disordered and ordered phases. Ab initio calculations strongly suggest a preferential siting of Si in the tetrahedral sites involved in a smaller number of 4-rings in the NAT topology (i.e., the low multiplicity site). The cost of violations of Loewenstein's rule has also been calculated. For this topology and chemical composition the preferential siting and Loewenstein's rule drive together the system to the ordered configuration. A Monte Carlo sampling procedure affords a reasonable model for the initial, mainly disordered state, which fits well within the experimental disorder-order series.     

An expeditious,solvent-free synthesis of some 5-aryl-2-(2-hydroxyphenyl)-1,3,4-oxadiazoles

An efficient, rapid, microwave-accelerated one-step synthesis of some 5-aryl-2-(2-hydroxy-phenyl)-1,3,4-oxadiazoles by reaction of salicylic hydrazide with carboxylic acids in the presence of thionyl chloride under neat conditions is described. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 8, pp. 1264–1267, August, 2007.     

Relativistic calculations on the ground and excited states of AgH and AuH in cylindrical harmonic confinement

The relativistic ground and low-lying excited state potential energy curves of AgH and AuH in the presence of a cylindrical harmonic confining potential were calculated using the multi-state multi-reference perturbation theory with the spin-free no-pair Hamiltonian obtained via the third-order Douglas–Kroll transformation, incorporated with the full two-electron Breit–Pauli spin–orbit operator. The spectroscopic parameters were obtained for both the scalar- and quasi-relativistic potentials. The spin–orbit coupling constants were calculated for several strengths of the confining potential, and the effects of the applied potential on the coupling constants were analyzed using configuration interaction. This paper is dedicated to Serafín Fraga—colleague, mentor, and friend.     

Drag on two nonuniformly structured flocs moving along the axis of a cylindrical tube

The boundary effect on the drag on two identical, nonuniformly structured flocs moving along the axis of a cylindrical tube filled with a Newtonian fluid is investigated at a small to medium larger Reynolds number. A two-layer model is adopted to simulate various possible structures of a floc, and the flow field inside is described by Darcy–Brinkman model. The results of numerical simulation reveal that a convective flow is present in the rear region of a floc when Reynolds number is on the order of 40. The presence of the tube wall and/or the porous structure of a floc has the effect of reducing that convective flow. For a fixed level of the volume-average permeability of a floc, the influence of the tube wall on the drag depends upon floc structure; the influence on a nonuniformly structured floc is more significant than that on a uniformly structured floc. The more nonuniform the floc structure, the more appreciable the deviation of the drag coefficient–Reynolds number curve from a Stokes’-law-like relation becomes. The smaller the volume-average permeability of a floc and/or the smaller the separation distance between the two flocs, the greater is the deviation, but the presence of the tube wall has the effect of reducing that deviation.     

Electrochemical monitoring of indigo preparation using Maya’s ancient procedures

The preparation of indigo from Indigofera suffruticosa following the procedures attributed to ancient Mayas was electrochemically monitored using the voltammetry-of-microparticles approach. The mechanism formation of indigotin and indirubin from its precursors, indican and isatan, is discussed. Comparison of voltammetric profiles for differently prepared and commercial indigos and genuine Maya Blue samples suggests that the preparation procedure of indigo changed during the Late Classical Maya period. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Elemental analysis of Korean women’s blood serums using instrumental neutron activation analysis

Instrumental neutron activation analysis was used to assess the concentration of the inorganic trace elements in Korean women’s blood serums. It was found that a high concentration of Na and Cl incurs an analytical interference, but the 12 elements such as Br, Ca, Cl, Co, Cr, Cs, Fe, K, Na, Rb, Se and Zn could be determined under the condition of an interference minimization. Serum samples collected from 63 women were analyzed and the concentration level and range of the elements were evaluated. NIST SRMs were analyzed simultaneously for quality control. The average values of the Na and Cl determined in the serum samples were 3,365 and 3,533 mg/l, Ca was 96.4 mg/l and K was 191 mg/l. Besides, Br, Se and Zn have a concentration level of 6.46, 0.13 and 0.98 mg/l, respectively. It was found that there is no significant difference between the present values and the reported values.     

Characterisation of poly(neutral red) modified carbon film electrodes; application as a redox mediator for biosensors

The polymer redox mediator, poly(neutral red) (PNR), has been synthesised and characterised electrochemically to investigate the best electropolymerisation and mediation conditions for application in enzyme biosensors and to clarify the mechanism of action. Neutral red was electropolymerised by potential cycling on carbon film electrode substrates by allowing the monomer to be oxidised during the full 20 cycles of polymerisation or reducing the positive limit of the potential window after the first 2 cycles to impede monomer oxidation with a view to obtaining longer polymer chains and a lesser degree of branching. Comparison was made with glassy carbon substrates. The PNR films on carbon film electrodes were characterised using cyclic voltammetry and electrochemical impedance spectroscopy, as well as in glucose biosensors prepared with PNR. Glucose oxidase enzyme was immobilised by encapsulation in silica sol-gel and compared with that obtained by cross-linking with glutaraldehyde. The biosensors were evaluated by chronoamperometry in 0.1 M phosphate buffer saline solution, pH 7.0, and showed evidence of electron transfer between the enzyme cofactor flavin adenine dinucleotide and PNR dissolved in the enzyme layer competing with PNR-mediated electrochemical degradation of H₂O₂ formed during the enzymatic process. This paper is dedicated to Professor Dr. Algirdas Vaskelis on the occasion of his 70th birthday.     

New Factorial Designs to Evaluate Chemisorption of Divalent Metals on Aminated Silicas

Adsorption processes of Cu(II), Co(II), and Hg(II) on two aminated silica gel surfaces with immobilized ethylenediamine and diethylenediamine groups were studied by a new 2(3) full factorial design. Two metal quantity levels, temperatures of 25 and 50 degrees C, and silica amounts of 100 and 200 mg were employed. Our study indicates that higher factorial design levels increase adsorption for all metals evaluated, with the exception of the mass parameter. Adsorption is also significantly affected by important antagonistic and synergistic effects involving all factors. Both functionalized silica gel surfaces present higher interactions and good perspectives in preconcentration studies for mercury. The factorial design results are also discussed in terms of some solvation properties for each of the metals studied. Copyright 2001 Academic Press.     

Technological quality determination of pharmaceutical disintegrant by DSC cooling and DSC photovisual

A number of disintegrants are available on the market. They improve tablets’ disintegration. The objective of this work is the comparison of the technological quality parameters of disintegrants using different analytical techniques. Three batches of disintegrants and their binary mixtures (water:disintegrants) were investigated. Cooling experiments were used from –30 up to 200°C. The data obtained showed calorimetric differences between the samples. In the binary mixtures water showed different crystallization behaviour from the one found in the literature. According to the results DSC technique helped the quality control of different disintegrants.     

Thermodynamic characterization of different actin isoforms

Summary The thermodynamic properties of the cardiac and skeletal a-actin isoforms were studied to characterize the molecular bases of the functional differences between them with the method of differential scanning calorimetry (DSC). The thermal properties of the actin filaments were described in the presence of calcium and magnesium ions as well. Based on the calculated free energy changes the α-cardiac actin filaments appeared to be more stable in its physiologically more relevant, magnesium saturated form. The magnesium saturated form of the α-cardiac actin filaments seemed to be more stable compared to the calcium saturated form of it. The enthalpy and entropy changes could differentiate between the α-cardiac and α-skeletal actin isoforms and between the calcium and magnesium saturated cardiac actin isoforms as well. Our results can demonstrate that the few differences between the amino acid sequences of the α-actin isoforms have an influence on the thermal properties and maybe on the function of these proteins as well.