A way of establishing quality of measurements in gas analysis—national and international aspects

Standardising quality of measurements at both the national and international level results in a unity in measurement that may be regarded a synonym of traceability. In gas analysis, the key issue in achieving this aim is production of gaseous reference materials. Establishing a network of secondary measurement standards at gaseous CRM producers’ sites in Ukraine might be interesting for those involved in gas analysis activities. Inevitably, problems concerning the recognition of measuring capabilities of both national metrological institutes and local CRM producers are now an international issue. Thus, the problems of national adoption of international standards, as well as harmonisation between different international documents are currently relevant, and Ukrainian experience may be useful to others in this field. Presented at the 3rd International Conference on Metrology, November 2006, Tel Aviv, Israel.     

New In-situ Sampling and Analysis of the Production of CeO<Subscript>2</Subscript> Powders from Liquid Precursors using a Novel Wet Collection System in a rf Inductively Coupled Thermal Plasma Reactor. Part 1: Reactor System and Sampling Probe

A new reactor and a novel in-situ sampling technique were developed for the study of the synthesis of CeO₂ powders produced from dissolved cerium nitrate salts. The conical reactor minimized particle recirculation and provided a highly symmetrical and undisturbed plasma flow suitable for the analysis of the phenomena affecting the formation of CeO₂ powders. Both a calorimetric study of the reactor and a thermodynamic analysis of CeO₂ formation were conducted. The sampling probe is described and near-isokinetic sampling was achieved. The sampled particles were collected using a miniature wet collection system, i.e. a mist atomizer and a custom-made spray chamber. A numerical simulation of the velocity and temperature fields of the plasma gas in the reactor was done using Fluent. A comprehensive droplet-to-particle formation mechanism presented elsewhere is revisited and expanded based on calorimetry, thermodynamics of CeO₂ formation, numerical simulations and collected particles. No traces of other oxidation states other than CeO₂ were found.     

Electronic and Steric Influence of Axial and Equatorial Ligands in Vitamin B12 Model Complexes Derived from Cobaloxime: Electrochemical and 59Co-NMR Studies

In four series of strictly related organocobalt complexes, derived from cobaloximes by replacement of the O…H…O with O…-BF₂…O and/or (CH₂)₃ groups, the trends of ⁵⁹Co-NMR shielding and electrochemical data are discussed. A largely parallel behaviour of the plots of E_1/2(I) values for the first Co(III)/Co(II) electron transfer vs. the ₅₉Co chemical shifts reflects the similar sensitivity of the two parameters to a change in electron affinity of the central metal ion due to a variation of the organic group R. E_1/2(II) values for the second Co(II)/CO(I) electron transfer are less sensitive to the change of R, but the trend of the plot vs. δ(₅₉Co) is still parallel in the four series. Consistent deviations from a roughly linear dependence of E_1/2(I) on pK_a of the hydrocarbon acid corresponding to R, on Taft constant s?_* and on ⁵⁹Co shielding are noticed for the isopropyl derivatives and attributed to a steric effect. This was confirmed in a series of R? Co(DMG)pyridine complexes in which ⁵⁹Co shielding decreases steadily with increasing steric parameter E_s (Taft) of the alkyl group. There is experimental evidence from X-ray data that δ(⁵⁹Co) decreases with an increase of the Co? C bond length, illustrating steric hindrance in alkyl coordination to be responsible for the decreased shielding of the ⁵⁹Co nucleus. The relative displacements of the graphic displays for the different series reflect the effect of changes in electron affinity of the redox center, due to the equatorial ligand, which, in turn, is caused by variations in the electron-withdrawing power due to the introduction of the BF₂ group and by the change from ?2 to ?1 valence of the (CH₂)₃-capped ligands.     

Preconcentration of Cadmium and Zinc on a Chelating Sorbent and Their Determination by Flame Atomic Absorption Spectrometry

A method is developed for cadmium and zinc preconcentration on a minicolumn packed with a new chelating polymer sorbent. The effects of the test solution pH and volume, the sample matrix composition, the eluent volume, and the sample and eluent flow rates are studied. Zinc and cadmium in the eluate are determined by flame atomic absorption spectrometry. Under optimal conditions, the determined ion recovery is more than 95%. The detection limits (3σ, n = 20) are found to be 15.0 (Cd) and 17.2 (Zn) ng/mL. The developed method is employed for cadmium and zinc determination in samples of seawater and water obtained after oil pumping.     

Two-step upflow anaerobic sludge bed system for sewage treatment under subtropical conditions with posttreatment in waste stabilization ponds

A pilot-scale sewage treatment system consisting of two upflow anaerobic sludge bed (UASB) reactors followed by five waste stabilization ponds (WSPs) in series was studied under subtropical conditions. The first UASB reactor started up in only 1 mo (stable operation, high chemical oxygen demand [COD] removal efficiency, low volatile fatty acids concentration in the effluent, alkalinity ratio above 0.7, biogas production above 0.1 Nm3/kg of CODremoved). Removal efficiencies up to 90% were obtained in the anaerobic steps at a hydraulic retention time of 6 + 4 h (80% removal in the first step). Fecal coliform removal in the whole system was 99.9999% (99.94% in anaerobic steps and 99.98% in WSPs). COD balances over UASB reactors are provided. A minimum set of data necessary to build COD balances is proposed. Intermittent sludge washout was detected in the reactors with the COD balances. Sludge washout from single-step UASB reactors should be monitored and minimized in order to ensure constant compliance with discharge standards, especially when no posttreatment is provided. The system combined high COD and fecal coliform removal efficiency with an extremely low effluent concentration, complying with discharge standards, and making it an attractive option for sewage treatment in subtropical regions.     

Flow-injection analysis with a small cylindrical wire type electrode

An amperometric detector with a small thin mercury film electrode is described. The device demonstrates advantageous operational characteristics such as small dispersion (D<2) and “memory effect” (me<0.6%), extensive maximum sample frequency (msf −200 samples/h), and high sensitivity. It has been proven useful in flow-injection analysis at a constant potential under hydrodynamic conditions.     

Case Study: Doping Substances in Equestrian Food Supplements

In the course of investigations on equestrian supplemental products for the presence of doping substances, two products were found to contain forbidden substances. As reported earlier a plant extract (Mexican cactus extract) named “Energy 5” contained the anabolic androgenic steroids (AAS) stanozolol, 17β-hydroxy-17α-methyl-5α-androstane-3β-ol (3β,5α-THMT) as well as mestanolone not declared on the label. In the present study, a product called “Super Kalm Paste” was tested. Analysis by gas chromatography - mass spectrometry (GC-MS) revealed that the preparation contained the class I anti-arrhythmics quinine (trade names Kinidin^TM, Durules) and cinchonine. The samples were prepared according to a sample preparation procedure established for anabolic steroids in nutritional supplements for humans. The sample treatment comprised the extraction and purification of the analytes as well as the chemical conversion with N-methyl-N-trimethylsilyl-trifluoracetamide (MSTFA) to yield the trimethylsilyl (TMS)-derivatives. To verify whether the administration of such products could lead to positive doping tests, a pilot excretion study on “Energy 5” was conducted with two geldings, and urine samples were collected. Gas chromatography - high resolution mass spectrometry (GC-HRMS) after solid phase extraction and mixed derivatisation has demonstrated the presence of the stanozolol metabolite 16β-hydroxy-stanozolol in urine samples after “Energy 5” application.     

Catalytic oxidation of thiols to disulfides using iodine and CeCl3·7H2O in graphite

A very simple procedure for the efficient oxidation of thiols to disulfides catalyzed by I₂/CeCl₃·7H₂O in graphite and ethyl acetate as the solvent, in an open system at room temperature is described. The reaction proceeds cleanly under mild conditions and was performed with aromatic, aliphatic, and heterocyclic thiols.     

Thermal analysis and X-ray studies of chiral ferroelectric liquid crystalline materials and their binary mixtures

Summary Thermal properties of a homologous series of ferroelectric liquid crystals S-(-)-[4-(2-n-alkoxy-propionyloxy)]biphenyl-4'-[n-alkoxy-(3,5-dimethyl)]benzoate have been investigated by polarizing optical microscopy and differential scanning calorimetry. The mesophases were identified and confirmed by X-ray too. Three binary mixtures were prepared from the individual homologues. In one of the mixtures (Mix1), the ferroelectric SmC* phase has broadened and became enantiotropic. This mesophase remained monotropic in the other two mixtures (Mix2, Mix3). The chiral nematic N* phase did not appear in Mix1, but remained monotropic for the other two mixtures. Two molecular parameters, the layer spacing and the average intermolecular distance have been calculated from the X-ray results for the homologues and their mixtures. An intercalated tail-to-tail packing of molecules was found both in the single compounds and their mixtures resulting in the layer spacing about half of the molecular length of the single compounds.