Hg2(OH)[BF4], the First Basic Mercurous Tetrafluoroborate

The first basic mercurous tetrafluoroborate, Hg₂(OH)[BF₄], was obtained through a synproportionation reaction of red mercuric oxide, HgO, and elemental mercury in a 35% solution of HBF₄ in water as colourless single crystals. The crystal structure (orthorhombic, Pbca, Z = 8, a = 985.0(1), b = 991.0(1), c = 1141.0(2) pm) contains [(HO)_1/2—Hg—Hg—(OH)_1/2]⁺ zig‐zag chains that are further connected via weak Hg—OH interchain interactions to layers between which the [BF₄]^— are located in an up and down fashion.     

Recyclable polyurea-microencapsulated Pd(0) nanoparticles: an efficient catalyst for hydrogenolysis of epoxides

[reaction: see text] Pd nanoparticles (approximately 2 nm in size) microencapsulated in polyurea is an efficient and recyclable catalyst for reductive ring-opening hydrogenolysis of epoxides, using either HCOOH/Et(3)N or H(2) as a hydrogen donor.     

Photoelectrochemistry on Ru(II)-2,2'-bipyridine-phosphonate-derivatized TiO2 with the I3-/I- and quinone/hydroquinone relays. Design of photoelectrochemical synthesis cells

Photocurrent measurements have been made on nanocrystalline TiO2 surfaces derivatized by adsorption of a catalyst precursor, [Ru(tpy)(bpy(PO3H2)2)(OH2)]2+, or chromophore, [Ru(bpy)2 (bpy(PO3H2)2)]2+ (tpy is 2,2':6',2' '-terpyridine, bpy is 2,2'-bipyridine, and bpy(PO3H2)2 is 2,2'-bipyridyl-4,4'-diphosphonic acid), and on surfaces containing both complexes. This is an extension of earlier work on an adsorbed assembly containing both catalyst and chromophore. The experiments were carried out with the I3-/I- or quinone/hydroquinone (Q/H2Q) relays in propylene carbonate, propylene carbonate-water mixtures, and acetonitrile-water mixtures. Electrochemical measurements show that oxidation of surface-bound Ru(III)-OH2(3+) to Ru(IV)=O(2+) is catalyzed by the bpy complex. Addition of aqueous 0.1 M HClO4 greatly decreases photocurrent efficiencies for adsorbed [Ru(tpy)(bpy(PO3H2)2)(OH2)]2+ with the I3-/I- relay, but efficiencies are enhanced for the Q/H2Q relay in both propylene carbonate-HClO4 and acetonitrile-HClO4 mixtures. The dependence of the incident photon-to-current efficiency (IPCE) on added H2Q in 95% propylene carbonate and 5% 0.1 M HClO4 is complex and can be interpreted as changing from rate-limiting diffusion to the film at low H2Q to rate-limiting diffusion within the film at high H2Q. There is no evidence for photoelectrochemical cooperativity on mixed surfaces containing both complexes with the IPCE response reflecting the relative surface compositions of the two complexes. These results provide insight into the possible design of photoelectrochemical synthesis cells for the oxidation of organic substrates.     

Synthese und Kristallstrukturen der Phosphanimin-Komplexe MCl2(Me3SiNPMe3)2 mit M = Zn und Co,und CoCl2(HNPMe3)2

Syntheses and Crystal Structures of the Phosphaneimine Complexes MCl₂(Me₃SiNPMe₃)₂ with M = Zn and Co, and CoCl₂(HNPMe₃)₂ The molecular complexes MCl₂(Me₃SiNPMe₃)₂ (M = Zn, Co) have been prepared by the reaction of the dichlorides of zinc and cobalt with Me₃SiNPMe₃ in CH₃CN and CH₂Cl₂, respectively, whereas the complex CoCl₂(HNPMe₃)₂ has been prepared by the reaction of CoCl₂ with NaF in boiling acetonitrile in the presence of Me₃SiNPMe₃. All complexes were characterized by IR spectroscopy and by crystal structure determinations. The complexes MCl₂(Me₃SiNPMe₃)₂ crystallize isotypically. ZnCl₂(Me₃SiNPMe₃)₂: Space group P2₁2₁2₁, Z = 4, 2677 observed unique reflections, R = 0.024. Lattice dimensions at ?70°C: a = 1243.6; b = 1319.0; c = 1464.7 pm. CoCl₂(Me₃SiNPMe₃)₂: Space group P2₁2₁2₁, Z = 4, 3963 observed unique reflections, R = 0,071. Lattice dimensions at ?80°C: a = 1236.3; b = 1317.4; c = 1457.6 pm. CoCl₂(HNPMe₃)₂ · CH₂Cl₂: Space group Pbca, Z = 8, 1354 observed unique reflections, R = 0.055. Lattice dimensions at ?80°C: a = 1247.3; b = 998.4; c = 2882.4 pm. All complexes have monomeric molecular structures, in which the metal atoms are coordinated in a distorted tetrahedral fashion by the two chlorine atoms and by the nitrogen atoms of the phosphaneimine molecules.     

LiTiCl3: Synthesis and thermal behaviour

LiTiCl₃ is obtained as one example within an ample solid solution, Li_24–2nTi_nCl₂₄ (?4?n?10), by synpropotionation of TiCl₃ and Ti in the presence of LiCl (2:1:3 molar ratio) in sealed tantalum tubes at 750°C. It crystallizes with the inverse spinel-type structure according to (Li_0.67)^[4](Li_0.67Ti_1.33)^[4]Cl₄ with, at 25°C, a = 1048.62(4) pm, space group Fd3m. Thermal expansion is linear with α = 4.85 × 10^?5K^?1 up to about 300°C and thereafter, when the migration of Li⁺ from tetrahedral to octahedral interstices becomes increasingly important, it exhibits a relative decrease resulting, finally, in the phase transition to a NaCl-type structure that is observed for the first time at about 575°C.     

Übergangsmetall-substituierte phosphane,arsane und stibane : XXV. C5H5(CO)2[P(OMe)3]M-substituierte dioxaphospholane und dioxarsolane; stereochemische evidenz für den intermolekularen ablauf einer isomerisierung unter methylgruppenverschiebung

2-C₅H₅(CO)₂[P(OMe)₃]Mo(W)-substituted 4,4,5,5-tetramethyl-1,3,2-dioxarsolanes and -dioxaphospholanes (Ia–Ic) are obtained from C₅H₅(CO)₃M derivatives via CO/P(OMe)₃ exchange. In all cases the phosphite ligand appears trans to the σ-bonded arsenic heterocycle, which prefers a conformation with the transition metal group in an axial position. The dioxaphospholane-metal (Ia) undergoes isomerization with alkyl migration at 0°C, which due to stereochemical reasons can only occur by an intermolecular mechanism.     

Synthesis of a homoleptic niobium(V) thiolate complex and the preparation of niobium sulfide via thio "sol-gel" and vapor phase thin-film experiments

Reaction of [Nb(NMe(2))(5)] with 10 equiv of 2,6-Me(2)C(6)H(3)SH in toluene results in the formation of red crystals of [Nb(SC(6)H(3)Me(2)-2,6)(5)]. Crystal structure analysis of [Nb(SC(6)H(3)Me(2)-2,6)(5)] showed that the niobium center adopts a distorted trigonal bipyramidal geometry. Niobium disulfide, NbS(2), has been successfully prepared via a thio "sol-gel" process using [Nb(SC(6)H(3)Me(2)-2,6)(5)] as the metal source. In contrast, vapor phase thin-film studies revealed that [Nb(SC(6)H(3)Me(2)-2,6)(5)] functions as a single-source precursor to NbS films.     

Zum thermischen Verhalten von Li3MnO4. II [1, 2]. Über α- und β- Li2MnO3

Thermal Behaviour of Li₃MnO₄. II. α- and β-Li₂MnO₃ By thermal decomposition of Li₃MnO₄ we obtained two new forms of Li₂MnO₃: α-Li₂MnO₃ crystallizes due to Guinier-Simon photographs cubic face-centered with a = 4.09₂ Å, β-Li₂MnO₃ hexagonal with a = 4,93, c = 14.24 Å, c/a = 2.89. α-Li₂MnO₃ is paramagnetic with μ = 3,82 B.M. Below the Neel temperature (≈? 50 K) β-Li₂MnO₃ is antiferromagnetic. Effective Coordination Numbers, ECoN, are calculated and discussed.     

Isolation,identification and synthesis of the sex pheromone of the citrus mealybug,Planococcus citri (risso)

The sex attractant pheromone of the citrus mealybug, $\text{Planococcus citri}$ (Risso), has been Identified as (1$\text{R}$-$\text{cis}$)-(+)-2,2-dimethyl-3-(1-methylethenyl)cyclobutanemethanol acetate (VI).     

Non-radioactive determination of PTH and dabsyl phosphoamino acids by capillary electrophoresis

Summary Capillary electrophoresis is a novel technique in the non-radioactive determination of phosphoamino acids. The main advantage of the method presented is the high selectivity and the ability to separate all phosphoamino acid derivatives. Non-radioactive determination of PTH or dabsyl phosphoamino acids by capillary electrophoresis provides a fast and simple screening procedure for all O-phosphorylated amino acids in protein and peptides in the low picomolar range.