Long range relationship between Morse and Lennard–Jones potential energy functions

Arising from the use of the Morse function–which is well-known for its applicability for describing bonded interaction energy–in van der Waals systems, an attempt is made herein to express parameters of the Lennard–Jones potential function in terms of the Morse function to enable normalized comparison. In a departure from previous work where the parameter relationships enforce equal curvature at the minimum well-depth, the present approach replaces this rule with equal area above the curves for 1?≤?(r/R)?≤?∞. Results show good approximations of the Morse function to the Lennard–Jones curve and vice versa. Comparison with the previous relation for short range interaction shows that the present relations offer superior agreement with the Lennard–Jones function over a longer range. The conversion relations provide a cost-effective, less time-consuming and reasonably reliable method for obtaining Morse parameters from those of the Lennard–Jones function and vice versa.     

Construction of inclusions with vanishing generalized polarization tensors by imperfect interfaces

We investigate the problem of planar conductivity inclusion with imperfect interface conditions. We assume that the inclusion is simply connected. The presence of the inclusion causes a perturbation in the incident background field. This perturbation admits a multipole expansion of which coefficients we call as the generalized polarization tensors (GPTs), extending the previous terminology for inclusions with perfect interfaces. We derive explicit matrix expressions for the GPTs in terms of the incident field, material parameters, and geometry of the inclusion. As an application, we construct GPT-vanishing structures of general shape that result in negligible perturbations for all uniform incident fields. The structure consists of a simply connected core with an imperfect interface. We provide numerical examples of GPT-vanishing structures obtained by our proposed scheme.     

Growth of Ni2Si by rapid thermal annealing: Kinetics and moving species

The growth kinetics is characterized and the moving species is identified for the formation of Ni₂Si by Rapid Thermal Annealing (RTA) of sequentially deposited Si and Ni films on a 100 Si substrate. The interfacial Ni₂Si layer grows as the square root of time, indicating that the suicide growth process is diffusion-limited. The activation energy is 1.25±0.2 eV in the RTA temperature range of 350–450° C. The results extend those of conventional steady-state furnace annealing quite fittingly, and a common activation energy of 1.3±0.2 eV is deduced from 225° to 450° C. The marker experiment shows that Ni is the dominant moving species during Ni₂Si formation by RTA, as is the case for furnace annealing. It is concluded that the two annealing techniques induce the same growth mechanisms in Ni₂Si formation.     

Direct single-layered fabrication of 3D concavo–convex patterns in nano-stereolithography

A nano-surfacing process (NSP) is proposed to directly fabricate three-dimensional (3D) concavo–convex-shaped microstructures such as micro-lens arrays using two-photon polymerization (TPP), a promising technique for fabricating arbitrary 3D highly functional micro-devices. In TPP, commonly utilized methods for fabricating complex 3D microstructures to date are based on a layer-by-layer accumulating technique employing two-dimensional sliced data derived from 3D computer-aided design data. As such, this approach requires much time and effort for precise fabrication. In this work, a novel single-layer exposure method is proposed in order to improve the fabricating efficiency for 3D concavo–convex-shaped microstructures. In the NSP, 3D microstructures are divided into 13 sub-regions horizontally with consideration of the heights. Those sub-regions are then expressed as 13 characteristic colors, after which a multi-voxel matrix (MVM) is composed with the characteristic colors. Voxels with various heights and diameters are generated to construct 3D structures using a MVM scanning method. Some 3D concavo–convex-shaped microstructures were fabricated to estimate the usefulness of the NSP, and the results show that it readily enables the fabrication of single-layered 3D microstructures. PACS 85.40.Hp; 81.16.Nd; 42.82.Cr     

Generation of 2-nJ pulses from a femtosecond ytterbium fiber laser

We report a mode-locked ytterbium fiber laser that generates femtosecond pulses with energies as large as 2.2 nJ. This represents a 20-fold improvement in pulse energy compared with that of previously reported femtosecond Yb fiber lasers. The laser produces pulses as short as 52 fs, which are to our knowledge the shortest pulses to date from a Yb fiber laser. The laser is diode pumped by a wavelength-division multiplexing coupler, which leads to excellent stability.     

Room temperature diluted magnetic semiconductor synthesized by dual beam laser deposition

Diluted magnetic semiconductor Co-doped ZnO film has been synthesized by a dual beam pulsed laser deposition method. The magnetic, electrical, and optical properties of the Zn_0.985Co_0.015O_0.67 film are studied in this paper. The film shows ferromagnetic behavior with a coercivity of about 300 Oe at room temperature, and semiconductor behavior with carrier concentration of 2.2×10¹⁸ cm^-3, and a resistivity of 102 mcm. Structural investigations indicated that the film has similar lattice constants to that of ZnO. It is shown that the film exhibits excellent optical properties with a band gap energy of 3.31 eV, which is close to that of ZnO. The origins of the magnetism are also discussed. PACS 81.15.Fg; 75.50 Pp; 61.72.Vv     

Microstructure effect on microtopography of chemically etched α + β Ti alloys

Microstructure effect on chemical etching behavior of the annealed Ti-6Al-4V and Ti-3Al-2.5V titanium (Ti) alloys was compared with that of unalloyed commercially pure titanium. The microstructural evolution of structure phases after annealing the titanium and its alloys at temperature near and above β transus and followed by furnace cooling to room temperature was studied using optical microscope, scanning electron microscope and X-ray diffraction techniques. The microstructure study illustrates that the heat treatment enhanced partitioning effect allows extensive formation of hemispherical and near spherical pits roughened surface to be readily acquired by chemically etching the annealed α + β titanium alloys. The kinetics of the chemical etching reaction process show a linear dependence on time. The annealed α + β titanium alloys that exhibit relatively lower weight loss and thickness reduction rate illustrate less chemical activity than the annealed unalloyed titanium.     

High-density plasma etching of indium-zinc oxide films in Ar/Cl2 and Ar/CH4/H2 chemistries

The dry etching characteristics of transparent and conductive indium-zinc oxide (IZO) films have been investigated using an inductively coupled high-density plasma. While the Cl₂-based plasma mixture showed little enhancement over physical sputtering in a pure argon atmosphere, the CH₄/H₂/Ar chemistry produced an increase of the IZO etch rate. On the other hand, the surface morphology of IZO films after etching in Ar and Ar/Cl₂ discharges is smooth, whereas that after etching in CH₄/H₂/Ar presents particle-like features resulting from the preferential desorption of In- and O-containing products. Etching in CH₄/H₂/Ar also produces formation of a Zn-rich surface layer, whose thickness (∼40 nm) is well-above the expected range of incident ions in the material (∼1 nm). Such alteration of the IZO layer after etching in CH₄/H₂/Ar plasmas is expected to have a significant impact on the transparent electrode properties in optoelectronic device fabrication.