Microwave‐assisted nucleophilic cleavage of 5,7‐dimethyl‐2‐phenyl‐1‐oxo‐lH‐pyrazolo[ 1,2‐a]pyrazol‐4‐ylium‐3‐olate to α‐phenylmalonamides

Three α‐phenylmalonamides have been prepared by the selective nucleophilic cleavage of 5,7‐dimethyl‐2‐phenyl‐1‐oxo‐1H‐pyrazolo[1,2‐a]pyrazol‐4‐ylium‐3‐olate in solventless microwave syntheses. The three weak nucleophiles employed were aniline, p‐chloroaniline and m‐toluidine. The α‐phenylmalonamides of these three aniline derivatives could not be prepared using the previously reported solvent syntheses via 3‐oxopyrazolo[1,2‐a]pyrazol‐8‐ylium‐1‐olates. All products were characterised using, infrared spectroscopy, ¹H nmr and electrospray mass spectrometry. The single crystal X‐ray structures of the starting pyrazolo‐[1,2‐a]pyrazole and α‐phenylmalon‐m‐toluidide are also reported.     

Synthesis and crystal structures of heterobimetallic Fe-Cd,Fe-Zn,and Fe-In complexes containing hemilabile phosphorus/oxygen and silicon/oxygen bridging ligands

The reactions of K[Fe{Si(OMe)₃}(CO)₃(PY)][PY=Ph₂PCH₂C(O)Ph, Ph₂PCH₂C(O)[(-C₅H₄)FeCp] (Cp=⁵-C₅H₅), Ph₂P(CH₂)₂CN] with CdCl₂·2.5H₂O, ZnX ₂ (X=Cl, I) or InCl₃ afforded Fe-Cd-Fe or Fe-M(-X)₂ M-Fe (M=Cd, Zn, In;X=Cl, I) and Fe-InCl₂ complexes. Some of them contain an unusual and labile -²-SiO alkoxysilyl bridge which may be associated with a bridging mode for the ketophosphine ligand (first such example structurally established), thus providing original results in bimetallic chemistry on the intramolecular coordination of oxygendonor functions ofchemically different hemilabile ligands firmly attached to a neighboring metal center. The structures of the trinuclear complex (3), of the chlorobenzene solvate of the tetranuclear complex (4a·C₆H₅Cl) and of [mer-(OC)₃{(EtO)₃Si} (4e) have been determined by X-ray diffraction. Crystals of 3 are orthorhombic, space groupPbcn, witha=19.010(4),b=11.766(5),c=26.998(7)Å, andZ=4. Crystals of4a·C₆H₅Cl are monoclinic, space groupC2/c witha=22.455(3),b=17.680(2),c=16.627(4)Å, =90.80(4)°, andZ=4. Crystals of4e are monoclinic, space groupC2/c witha=25.392(5),b=18.554(6),c=16.28(1)Å, =120.73(3)°, andZ=4. The structures were solved using direct methods and Fourier difference techniques and refined by blocked full-matrix least squares toR=0.035 (R _w =0.049) for 2719 observed reflections, toR=0.042 (R _w =0.056) for 3082 observed reflections, and toR=0.057 (R _w =0.075) for 1850 observed reflections for3, 4a·C₆H₅Cl and4e, respectively. The Fe-Zn complexes (9a), (9b) and (9c) were prepared and characterized by spectroscopic methods.Part 21 in the Series: Complexes with Functional Phosphines. Part 20: P. Braunstein, S. Coco Cea, A. DeCian, and J. Fischer (1992).Inorg. Chem. 31, 4203.     

Structural and electronic comparative analysis of aminopyridazines showing anti-GABA activity. Crystal structure of 2-(carboxy-3′-propyl)-3-amino-6-cyclohexylpyridazinium bromide.Ab initio Mulliken population analysis of the 6-phenyl-substituted analog compared to GABA

The crystal structure of 2-(carboxy-3-propyl)-3-amino-6-cyclohexylpyridazinium bromide has been determined by single-crystal X-ray diffraction techniques and refined by full-matrix least squares. The compound crystallized in the tri-clinic space groupP ¯1 witha=10.275(1),b=11.215(1),c=7.082(1) Å,=91.84(1),=102.21(1), =106.77(1)°, andZ=2. FinalR-factor is 0.045. The main structural results are very similar to the ones observed for the 6-phenyl analog. These two compounds are GABA-A antagonists.Ab initio molecular orbital calculations, with STO-3G and 4-31G basis sets, suggest that the exocyclic nitrogen accurately mimics the nitrogen atom of GABA.     

The size of sums of sets,II

We prove inequalities which give lower bounds for the Lebesgue measures of setsE +K whereK is a certain kind of Cantor set. For example, ifC is the Cantor middle-thirds subset of the circle groupT, then $$m(E)^{1 - log2/log3} \leqq m(E + C)$$ for every BorelE ?T.     

Parameterization of peptide 13C carbonyl chemical shielding anisotropy in molecular dynamics simulations.

NMR chemical shielding anisotropy (CSA) relaxation is an important tool in the study of dynamical processes in proteins and nucleic acids in solution. Herein, we investigate how dynamical variations in local geometry affect the chemical shielding anisotropy relaxation of the carbonyl carbon nucleus, using the following protocol: 1) Using density functional theory, the carbonyl (13)C' CSA is computed for 103 conformations of the model peptide group N-methylacetamide (NMA). 2) The variations in computed (13)C' CSA parameters are fitted against quadratic hypersurfaces containing cross terms between the variables. 3) The predictive quality of the CSA hypersurfaces is validated by comparing the predicted and de novo calculated (13)C' CSAs for 20 molecular dynamics snapshots. 4) The CSA fluctuations and their autocorrelation and cross correlation functions due to bond-length and bond-angle distortions are predicted for a chemistry Harvard molecular mechanics (CHARMM) molecular dynamics trajectory of Ca(2+)-saturated calmodulin and GB3 from the hypersurfaces, as well as for a molecular dynamics (MD) simulation of an NMA trimer using a quantum mechanically correct forcefield. We find that the fluctuations can be represented by a 0.93 scaling factor of the CSA tensor for both R(1) and R(2) relaxations for residues in helix, coil, and sheet alike. This result is important, as it establishes that (13)C' relaxation is a valid tool for measurement of interesting dynamical events in proteins.     

Effect of time on the interfacial and foaming properties of beta-lactoglobulin/acacia gum electrostatic complexes and coacervates at pH 4.2

The electrostatic complexation between beta-lactoglobulin and acacia gum was investigated at pH 4.2 and 25 degrees C. The binding isotherm revealed a spontaneous exothermic reaction, leading to a DeltaHobs = -2108 kJ mol(-1) and a saturation protein to polysaccharide weight mixing ratio of 2:1. Soluble electrostatic complexes formed in these conditions were characterized by a hydrodynamic diameter of 119 +/- 0.6 nm and a polydispersity index of 0.097. The effect of time on the interfacial and foaming properties of these soluble complexes was investigated at a concentration of 0.1 wt % at two different times after mixing (4 min, referred as t approximately 0 h and t = 24 h). At t approximately 0 h, the mixture is mainly made of aggregating soluble electrostatic complexes, whereas after 24 h these complexes have already insolubilize to form liquid coacervates. The surface elasticity, viscosity and phase angle obtained at low frequency (0.01 Hz) using oscillating bubble tensiometry revealed higher fluidity and less rigidity in the film formed at t approximately 0 h. This observation was confirmed by diminishing bubble experiments coupled with microscopy of the thin film. It was thicker, more homogeneous and contained more water at t approximately 0 h as compared to t = 24 h (thinner film, less water). This led to very different gas permeability's of Kt approximately 0 h = 0.021 cm s(-1) and Kt=24 h) = 0.449 cm s(-1), respectively. Aqueous foams produced with the beta-lactoglobulin/acacia gum electrostatic complexes or coacervates exhibited very different stability. The former (t approximately 0 h) had a stable volume, combining low drainage rate and mainly air bubble disproportionation as the destabilization mechanism. By contrast, using coacervates aged for 24 h, the foam was significantly less stable, combining fast liquid drainage and air bubble destabilization though fast gas diffusion followed by film rupture and bubble coalescence. The strong effect of time on the air/water interfacial properties of the beta-lactoglobulin/acacia gum electrostatic complexes can be understood by their reorganization at the interface to form a coacervate phase that is more fluid/viscous at t approximately 0 h vs rigid/elastic at t = 24 h.     

Phase transfer of metal cations by induced dynamic carrier agents: biphasic extraction based on dynamic covalent chemistry

In contrast to the classical method where a single molecule is designed to extract metal cations under specific conditions, dynamic covalent chemistry provides an approach based on the implementation of an adaptive dynamic covalent library for inducing the generation of the extractant species. This approach has been applied to the liquid–liquid extraction of copper(ii) nitrate based on a dynamic library of acylhydrazones constituents that self-build and distribute through the interface of a biphasic system. The addition of copper(ii) cations to this library triggers a modification of its composition and the up-regulation of the ligand molecules driven by coordination to the metal cations. Among these, one species has proven to be sufficiently lipophilic to play the role of carrier agent and its formation by component exchange enables the partial extraction of the copper(ii). The study of different pathways to generate the dynamic covalent library demonstrates the complete reversibility and the adaptability of the system. The detailed analytical investigation of the system provides a means to assess the mechanism of the dynamic extraction process.

Phase transfer of Cu(ii) cations is achieved by component exchange in a dynamic covalent library of acylhydrazone ligands. B1/B2 component exchange leads to the generation of a lipophilic carrier agent that extracts Cu(ii) into chloroform.     

Monolayers as models for supported catalysts: zirconium phosphonate films containing manganese(III) porphyrins

Organized monolayer films of a manganese tetraphenylporphyrin have been prepared and used as supported oxidation catalysts. Manganese 5,10,15,20-tetrakis(tetrafluorophenyl-4'-octadecyloxyphosphonic acid) porphyrin (1) has been immobilized as a monolayer film by a combination of Langmuir-Blodgett (LB) and self-assembled monolayer techniques that use zirconium phosphonate linkages to bind the molecule to the surface. Analysis by FTIR, XPS, UV-vis and polarized optical spectroscopy show that the films consist of noninteracting molecules effectively anchored and oriented nearly parallel to the surface. The monolayer films are stable to the solvent and temperature conditions needed to explore organic oxidations. The activity of films of 1 toward the epoxidation of cyclooctene using iodosylbenzene as the oxidant was compared to that of Manganese 5,10,15,20-tetrakis(pentafluorophenyl) porphyrin (2) and 1 under equivalent homogeneous conditions. The immobilized porphyrin 1 shows an enhanced activity relative to either homogeneous reaction. The main difference between 1 and 2 is the four alkyl phosphonate arms in 1 designed to incorporate the porphyrin within the films. The increased activity of immobilized 1 is a combination of the porphyrin structure, which prohibits the formation of mu-oxo dimers even in solution, and a change in conformation when anchored to the surface. The study demonstrates that careful monolayer studies can provide useful models for the design and study of supported molecular catalyst systems.     

Rational incorporation of defects within metal–organic frameworks generates highly active electrocatalytic sites

The allure of metal–organic frameworks (MOFs) in heterogeneous electrocatalysis is that catalytically active sites may be designed a priori with an unparalleled degree of control. An emerging strategy to generate coordinatively-unsaturated active sites is through the use of organic linkers that lack a functional group that would usually bind with the metal nodes. To execute this strategy, we synthesize a model MOF, Ni-MOF-74 and incorporate a fraction of 2-hydroxyterephthalic acid in place of 2,5-dihydroxyterephthalic acid. The defective MOF, Ni-MOF-74D, is evaluated vs. the nominally defect-free Ni-MOF-74 with a host of ex situ and in situ spectroscopic and electroanalytical techniques, using the oxidation of hydroxymethylfurtural (HMF) as a model reaction. The data indicates that Ni-MOF-74D features a set of 4-coordinate Ni–O₄ sites that exhibit unique vibrational signatures, redox potentials, binding motifs to HMF, and consequently superior electrocatalytic activity relative to the original Ni-MOF-74 MOF, being able to convert HMF to the desired 2,5-furandicarboxylic acid at 95% yield and 80% faradaic efficiency. Furthermore, having such rationally well-defined catalytic sites coupled with in situ Raman and infrared spectroelectrochemical measurements enabled the deduction of the reaction mechanism in which co-adsorbed *OH functions as a proton acceptor in the alcohol oxidation step and carries implications for catalyst design for heterogeneous electrosynthetic reactions en route to the electrification of the chemical industry.

The allure of metal–organic frameworks (MOFs) in heterogeneous electrocatalysis is that catalytically active sites may be designed a priori with an unparalleled degree of control.