Postnonlinearity compensation with data-driven phase modulators in phase-shift keying transmission

A novel scheme for postnonlinearity compensation is proposed to reduce the phase jitter in phase-shift keying transmission. A phase modulator is used to modulate the phase of the data pulses in front of the receiver. The magnitude of the phase modulation is proportional to the detected pulse intensity, and the sign is opposite to that of the nonlinear phase shift caused by self-phase modulation. Thus, the nonlinear phase noise induced by amplitude fluctuation and self-phase modulation is partially compensated for. We show by numerical simulations that a differential phase-shift keying dispersion-managed soliton system at 10Gbits/s with such postnonlinearity compensation can provide greater than 3dB of improvement in ultralong-haul dense wavelength-division multiplexing transmissions.     

Sol-Gel Nanometrology: Gated Sampling Can Reveal Initial Sol Formation Kinetics

This report describes a gated sampling approach for studying the initial formation of sol-gel glasses prepared from sodium silicate solution (water glass) and sulphuric acid. Previously described were how changes in particle size and subsequently how sol-gel formation dynamics can be tracked using time-resolved fluorescence anisotropy, by labeling growing silica nanoparticles with suitable fluorescence probes. One limiting factor of this approach was the 2 minute measurement time, which limits this technique for studying the initial sol formation dynamics and limits the measurement precision. Using a continuous flow system and delaying sol flow through different tubing lengths overcomes this problem and allows monitoring of the very early stages of sol formation, second by second after sol preparation, irrespective of the anisotropy measurement time. This technique was applied to studying the initial formation dynamics, within the first 30 seconds, of a 12.01% SiO₂ (w/w), pH 0.66 sol-gel, finding that silica particles of 1.5 nm mean radius are formed within 10 seconds of mixing the sol-gel.     

Molecular orientation in poly(vinyl chloride) studied by Raman spectroscopy and birefringence measurements

The ratios of the intensities of Raman scattering in the C? CI stretching region for eight combinations of sample orientation and directions of polarization of incident and scattered light have been measured for 15 samples of poly(vinyl chloride) (PVC) containing 0, 5, 10, 15 or 20 pph dioctyl sebacate (DOS) plasticizer which had been drawn uniaxially at 22, 70, 75, 80, or 90°C to draw ratios in the range 1–4.5. The birefringences of the samples were also measured. The Raman data were analyzed to give 〈P₂(cosθ)〉_cryst and 〈P₄(cosθ)〉_cryst, the values of the second- and fourth-order Legendre polynomials in cosθ averaged over the distribution of orientations of the crystallites, where θ is the angle between the c axis of a typical crystallite and the draw direction. Comparison of 〈P₂(cosθ)〉_cryst with the birefrigence showed that the crystallites are more highly oriented than the noncrystalline material in samples containing the higher amounts of plasticizer drawn at the higher temperatures. A value of 13.0 × 10^?3 was deduced for the birefringence of fully oriented PVC. The values of 〈P₄(cosθ)〉_cryst for a given 〈P₂(cosθ)〉_cryst were found to be higher than predicted by calculations based on two simple models, the pseudoaffine rigid-rod rotation model and the affine rubber elasticity model.     

Enhanced Ratiometric pH Sensing Using SNAFL-2 on Silver Island Films: Metal-enhanced Fluorescence Sensing

We have explored the opportunities for enhanced ratiometric pH sensing using the well-known carboxy seminaphthofluorescein (SNAFL-2) and silver island films (SiFs). Our results show that the metallic surfaces can provide up to a 40-fold increase in probe fluorescence intensity as compared to nonmetallic surfaces with the same probe coverage. However, while the S/N is significantly better for pH sensing, the emission wavelength ratiometric values are similar to that obtained in solution, due to the fact that the emission of both the acidic and basic forms of the probe are enhanced to similar extents. To the best of our knowledge this is the first report of enhanced ratiometric fluorescence sensing on metallic surfaces.     

First-principles calculation of 17O and 25Mg NMR shieldings in MgO at finite temperature: rovibrational effect in solids

The temperature dependence of (17)O and (25)Mg NMR chemical shifts in solid MgO have been calculated using a first-principles approach. Density functional theory, pseudopotentials, a plane-wave basis set, and periodic boundary conditions were used both to describe the motion of the nuclei and to compute the NMR chemical shifts. The chemical shifts were obtained using the gauge-including projector augmented wave method. In a crystalline solid, the temperature dependence is due to both (i) the variation of the averaged equilibrium structure and (ii) the fluctuation of the atoms around this structure. In MgO, the equilibrium structure at each temperature is uniquely defined by the cubic lattice parameters, which we take from experiment. We evaluate the effect of the fluctuations within a quasiharmonic approximation. In particular, the dynamical matrix, defining the harmonic Hamiltonian, has been computed for each equilibrium volume. This harmonic Hamiltonian was used to generate nuclear configurations that obey quantum statistical mechanics. The chemical shifts were averaged over these nuclear configurations. The results reproduce the previously published experimental NMR data measured on MgO between room temperature and 1000 degrees C. It is shown that the chemical shift behavior with temperature cannot be explained by thermal expansion alone. Vibrational corrections due to the fluctuations of atoms around their equilibrium position are crucial to reproduce the experimental results.     

Prediction of a phase transition to a hydrogen bond ordered form of ice VI

Ice VI is a hydrogen bond disordered crystal over its known region of stability. In this work, we predict that ice VI will transform into a hydrogen bond ordered phase near 108 K, and have identified the likely low-temperature phase as ferroelectric (space group Cc) with an antiferroelectric structure (space group P2(1)2(1)2(1)) close by in energy. Electronic density functional theory calculations provide input to our calculations, which are extended to cells large enough for statistical simulations by using graph invariants. A significant decrease in the configurational entropy is predicted as hydrogen bonds exhibit partial order above the transition, provided that the hydrogen bonds can equilibrate on an experimental time scale. Conversely, partial disorder is predicted at temperatures below the transition. Although some evidence for ordering of ice VI has been observed in experiments, a low-temperature proton ordered phase has not been identified experimentally.     

Ethene adsorption, dehydrogenation and reaction with Pd(110): Pd as a carbon 'sponge'

The interaction of ethene with the Pd(110) surface has been investigated, mainly with a view to understanding the dehydrogenation reactions of the molecule and mainly using a molecular beam reactor. Ethene adsorbs with a high probability over the temperature range 130 to 800 K with the low-coverage sticking probability dropping from 0.8 at 130 K to 0.35 at 800 K. The adsorption is of the precursor type, with a weakly held form of ethene being the intermediate between the gas phase and strong chemisorption. Dehydrogenation begins at approximately 300 K and is fast above 350 K. If adsorption is carried out at temperatures up to approximately 380 K, adsorption saturates after about 0.25 monolayer have adsorbed, but above approximately 450 K, adsorption continues at a high rate with continuous hydrogen evolution and C deposition onto the surface. It appears that, in the intermediate temperature range, the carbonaceous species formed is located in the top layer and thus interferes with adsorption, whereas the C goes subsurface above 450 K, the adsorption is almost unaffected, and the C signal is significantly attenuated in XPS. However, the deposited carbon can easily be removed again by reaction with oxygen, thus implying that the carbon remains in the selvedge, that is, in the immediate subsurface region probably consisting of a few atomic layers. No well-ordered structures are identified in either LEED or STM, though some evidence of a c(2 x 2) structure can be seen. The Pd surface, at least above 450 K, appears to act as a "sponge" for carbon atoms, and this effect is also seen for the adsorption of other hydrocarbons such as acetaldehyde and acetic acid.     

Inhibition studies on salicylate synthase

Analogues of chorismate and isochorismate were designed and tested as potential inhibitors in the first inhibition study against a salicylate synthase.     

High-accuracy optical clock via three-level coherence in neutral bosonic 88Sr

An optical atomic clock scheme is proposed that utilizes two lasers to establish coherent coupling between the 5s2 1S0 ground state of 88Sr and the first excited state, 5s5p 3P0. The coupling is mediated by the broad 5s5p 1P1 state, exploiting the phenomenon of electromagnetically induced transparency. The effective linewidth of the clock transition can be chosen at will by adjusting the laser intensity. By trapping the 88Sr atoms in an optical lattice, long interaction times with the two lasers are ensured; Doppler and recoil effects are eliminated. Based on a careful analysis of systematic errors, a clock accuracy of better than 2 x 10(-17) is expected.