Rapid Photocrosslinkable Thermoresponsive Injectable Polyphosphazene Hydrogels

Rapidly photocrosslinkable and thermosensitive polyphosphazene polymers have been prepared to overcome the limitations associated with long UV exposure. Short UV exposure on the thermosensitive gels under mild conditions leads to quick photocrosslinking of the acrylate groups in the polymer network, and results in a dual crosslinked network with enhanced mechanical strength. The accelerated photocrosslinking can be attributed to the high reactivity of the acrylate double bond and hydrophobic interactions in the polymer network. The effects on the degree of photocrosslinking of the UV light intensity and the concentration of the photoinitiator were studied. In vitro and in vivo photocrosslinkings were accomplished within 120 and 180 s of exposure times, respectively. The degradation rate of the polymers depended on the degree of acrylate substitution in the polymer network. These results demonstrate that the injectable hydrogels with desired mechanical properties and degradation rates can be created in situ under mild photocrosslinkable conditions, and the dual crosslinkable acrylated poly(organophosphazenes) may hold great promise for biomedical delivery applications of biological molecules, cells, and drugs.

     

TiO2 Nanoparticles Produced by Electric-Discharge-Nanofluid-Process as Photoelectrode of DSSC

Self-made TiO₂ nanoparticles were used as photoelectrode material of dye sensitized solar cell. The TiO₂ thin film coats through spreading nanoparticles evenly onto the ITO glass via self-made spin-heat platform, and then TiO₂ thin film is soaked in the dye N-719 more than 12 h to prepare the photoelectrode device. The TiO₂ nanoparticles produced by electric-discharge-nanofluid-process have premium anatase crystal property, and its diameter can be controlled within a range of 20-50 nm. The surface energy zeta potential of nanofluid is from -22 mV to -28.8 mV, it is a stable particle suspension in the deionized water. A trace of surfactant Triton X-100 put upon the surface of ITO glass can produce a uniform and dense TiO₂ thin film and heating up the spin platform to 200 oC is able to eliminate mixed surfac-tant. Self-made TiO₂ film presents excellent dye absorption performance and even doesn't need heat treatment procedure to enhance essential property. Results of energy analysis show the thicker film structure will increase the short-circuit current density that causes higher conversion efficiency. But, as the film structure is large and thick, both the open-circuit voltage and fill factor will decline gradually to lead bad efficiency of dye-sensitized solar cell.     

Ionic liquid–graphene composite for ultratrace explosive trinitrotoluene detection

A new ionic liquid (IL)–graphene composite prepared by combining IL and a three-dimensional graphene material with large specific surface area and pronounced mesoporosity was used for ultratrace trinitrotoluene detection, showing low background current, high sensitivity of 1.65 μA cm^?2 per ppb, low detection limit of 0.5 ppb and good reproducibility, which is much superior to that demonstrated by the IL–CNT and IL–graphite composites. The preparation of IL–graphene composite expands the scope of IL-based electrochemical devices.     

Poly[bis(μ‐4‐benzoyl‐1‐isonicotinoylthiosemicarbazide‐κ2N:S)dichloridocadmium(II)]

The asymmetric unit of the title complex, [CdCl₂(C₁₄H₁₂N₄O₂S)₂]_n, consists of one Cd^II ion located on the crystallographic inversion centre, one 4‐benzoyl‐1‐isonicotinoylthiosemicarbazide ligand and one chloride ligand. The central Cd^II ion adopts a distorted octahedral coordination geometry formed by two pyridyl N atoms of two ligands, two S atoms of two other ligands and two chloride ligands. The thiosemicarbazide ligands act as bridges, linking the metal ions into a two‐dimensional layered structure parallel to the bc plane. Intermolecular N—H...O hydrogen bonds and C—H...π interactions exist between adjacent layers.     

Direct electron transfer of cytochrome C and its electrocatalytic properties on multiwalled carbon nanotubes/ciprofloxacin films

In this study, stable and homogenous thin films of multiwalled carbon nanotubes (MWCNTs) were obtained on conducting surface using ciprofloxacin (CF, fluoroquinolone antibiotic) as an effective-dispersing agent. Further, MWCNTs/CF film modified electrodes (glassy carbon and indium tin oxide-coated glass electrode) are used successfully to study the direct electrochemistry of proteins. Here, cytochrome C (Cyt-C) was used as a model protein for investigation. A MWCNTs/CF film modified electrode was used as a biocompatible material for immobilization of Cyt-C from a neutral buffer solution (pH 7.2) using cyclic voltammetry (CV). Interestingly, Cyt-C retained its native state on the MWCNTs/CF film. The Cyt-C adsorbed MWCNTs/CF film was characterized by scanning electron microscopy (SEM), UV–visible spectrophotometry (UV-vis) and CV. SEM images showed the evidence for the adsorption of Cyt-C on the MWCNTs/CF film, and UV–vis spectrum confirmed that Cyt-C was in its native state on MWCNTs/CF film. Using CV, it was found that the electrochemical signal of Cyt-C was highly stable in the neutral buffer solution and its redox peak potential was pH dependent. The formal potential (−0.27 V) and electron transfer rate constant (13 ± 1 s⁻¹) were calculated for Cyt-C on MWCNTs/CF film modified electrode. A potential application of the Cyt-C/MWCNTs/CF electrode as a biosensor to monitor H₂O₂ has been investigated. The steady-state current response increases linearly with H₂O₂ concentration from 2 × 10⁻⁶ to 7.8 × 10⁻⁵ M. The detection limit for determination of H₂O₂ has been found to be 1.0 × 10⁻⁶ M (S/N = 3). Thus, Cyt-C/MWCNTs/CF film modified electrode can be used as a biosensing material for sensor applications.     

An investigation of the microstructure,optical and electrical properties of ZITO thin film using the sol–gel method

The multi-compound ZITO transparent conductive oxide (TCO) thin films were synthesized using the sol–gel method. The ZITO thin films with various volume ratios of ZnO to ITO (1:1, 2:1 and 9:1) were crystallized at different temperatures (600–700 °C). The results showed that the crystalline characteristics and optical transmittance were mainly dependent on ITO content and crystallization. Notably, the 650 °C Z₉ITO film not only had better conductivity but also possessed excellent optical transmittance. In addition, the surface roughness of the ZITO films and optoelectric properties of IZO (indium doped ZnO) films were analyzed to confirm the contribution of indium dopants on the optical transmittance. Also, the ZITO films were subjected to the effects of indium and tin dopants and this improved the related characteristics of ZnO films.     

Gene Cloning,Overexpression, and Characterization of the Nitrilase from <Emphasis Type="Italic">Rhodococcus rhodochrous</Emphasis> tg1-A6 in <Emphasis Type="Italic">E. coli</Emphasis>

A DNA fragment containing the entire coding sequence of nitrilase gene was amplified from Rhodococcus rhodochrous tg1-A6 with high nitrilase activity using PCR and sequenced. The open reading frame of the nitrilase gene contains 1,101 base pairs, which encodes a putative polypeptide of 366 amino acid residues. The nitrilase gene was cloned into an expression vector pET-28a and expressed in an Escherichia coli strain BL21(DE3). The enzymatic activity of nitrilase, which converts various nitriles to the corresponding carboxylic acids, was detected to reach 24.5 U/ml at 9 h in the recombinant bacteria.     

氢化物发生-原子荧光光谱法在中药微量元素分析中的应用

氢化物发生-原子荧光光谱法(HG-AFS)用于测定可生成氢化物的金属元素,具有仪器结构简单、灵敏度高、气相干扰少和可多元素同时分析等优点.该文对HG-AFS在中药中微量及痕量As、Hg、Se、Pb、Cd、Sb和Ge分析中的应用及研究进展进行了评述,包括中药样品的预处理技术、消解方法、元素含量及形态分析.探讨了HG-AFS在中药微量金属元素含量和形态分析中存在的问题及应用前景.     

纳米碳材料负载铂催化剂在环己烷脱氢反应中的催化性能研究

制备了纳米碳材料负载铂的催化剂,通过N₂吸附、TEM、XRD技术分别对载体的BET比表面积和催化剂结构、形貌和粒径大小进行了表征。考察了不同催化剂在环己烷脱氢反应中的催化性能以及温度对纳米碳颗粒负载铂催化剂活性的影响。结果表明,锚定在不同碳载体上的铂有较好的分散性,粒径较小,粒度分布范围较窄并且具有相同的晶型结构。孔状纳米碳颗粒负载铂催化剂的活性高于碳纳米管和高比表面的活性炭负载铂催化剂,并且在低温条件下已经显示了较高的活性,尤其是中空碳颗粒负载铂催化剂在环己烷脱氢反应中显示了好的活性和稳定性。