下料问题的优化模型及其快速算法

结合生产实际中具体的下料问题,本文建立了该类问题的优化模型,并提出下料方式的遴选三准则,即高利用率优先准则,长度优先准则和时间优先准则.运用本文的算法对一维下料的利用率高达99.6%,机器时间4秒.对二维的利用率为98.9%,机器时间约7秒.     

The operational performance of the Yale ESTU

The ESTU began operation in 1988 and achieved the design voltage of 20 MV in 1990. Since that time, improvements to the gas handling system, negative ion injector, accelerator terminal and control system have greatly increased its capability and reliability. Today, the ESTU can efficiently produce an extensive assortment of stable ions at wide-ranging energies in support of low-energy nuclear physics.     

直流磁控溅射一步法原位制备MgB2超导薄膜

用MgB2靶,控制直流磁控溅射工作在异常辉光放电或弧光放电状态,在SrTiO3衬底上原位一次性得到了MgB2超导薄膜,其起始转变温度为32K,零电阻温度为15K. 关键词： 高温超导体 超导薄膜 磁控溅射 二硼化镁     

Application of pressure sensitive paint measurement to a low-solidity cascade diffuser of a transonic centrifugal compressor

A pressure sensitive paint (PSP) measurement has been known as a pressure field measurement technique based on the oxygen quenching phenomenon of luminescence of specific luminophores. A PSP measurement was applied for pressure field measurement in a low-solidity circular cascade diffuser of a single-stage transonic centrifugal compressor with 5 in pressure ratio for HFC134a gas. The oxygen concentration was about 500 ppm. Ru (bath-phen) was adsorbed on a silica-gel thinlayer chromatography sheet, and the sheet was pasted onto the side-wall between the cascade vanes. A drastic change in luminescent intensity was recognized during a surge condition. Also the pressure variations based on luminescent intensity agreed well with the pressure fluctuations measured using a semiconductor pressure sensor with high-frequency-response. It was shown that a PSP measurement worked well to investigate the unsteady pressure fields in a circular cascade diffuser of a transonic centrifugal compressor. Moreover, the time response of PSP becomes clear as a problem to be overcome for the present.     

Bounds on the maximum numbers of clear two-factor interactions for 2^{(n_1 + n_2 ) - (k_1 + k_2 )} fractional factorial split-plot designs

Fractional factorial split-plot (FFSP) designs have an important value of investigation for their special structures. There are two types of factors in an FFSP design: the whole-plot (WP) factors and sub-plot (SP) factors, which can form three types of two-factor interactions: WP2fi, WS2fi and SP2fi. This paper considers FFSP designs with resolution III or IV under the clear effects criterion. It derives the upper and lower bounds on the maximum numbers of clear WP2fis and WS2fis for FFSP designs, and gives some methods for constructing the desired FFSP designs. It further examines the performance of the construction methods.     

高电荷态离子207Pbq+(24≤q≤36)与Si(110)固体表面作用的电子发射研究

报道了利用兰州重离子加速器国家实验室ECR源引出的高电荷态离子207Pbq+(24≤q≤36)入射到Si(110)表面产生的电子发射的实验测量结果.结果表明,高电荷态离子与固体表面相互作用产生的电子发射产额Y与入射离子的电荷态q、入射角度ψ和入射能量E都有很强的关联.首次发现,电子发射产额Y与入射角度ψ间有接近1/tanψ的关系.理论分析认为,这些过程与基于经典过垒模型的势能电子发射过程密切相关.     

Oxidation process of SiGe on SOI substrates

The oxidation of SiGe film epitaxial grown on top of SOI wafers has been studied. These SiGe/SOI samples were oxidized at 700, 900, 1100 °C. Germanium atoms were rejected from SiGe film to SOI layer. A new Si_1−xGe_x (x is minimal) layer formed at SiGe/Si interface. As the germanium atoms diffused, the new Si_1−xGe_x (x is minimal) layer moved to Si/SiO₂ interface. Propagation of threading dislocation in SiGe film to SOI substrate was hindered by the new SiGe/Si interface. Strain in SOI substrate transferred from SiGe film was released through dislocation nucleation and propagation inner. The relaxation of SiGe film could be described as: strain relaxed through strain equalization and transfer process between SiGe film and SOI substrates. Raman spectroscopy was used to characterize the strain of SiGe film. Microstructure of SiGe/SOI was observed by transmission electron microscope (TEM).     

An Integrated Selection Formulation for the Best Normal Mean: The Unequal and Unknown Variance Case

This paper considers an integrated formulation in selecting the best normal mean in the case of unequal and unknown variances. The formulation separates the parameter space into two disjoint parts, the preference zone (PZ) and the indifference zone (IZ). In the PZ we insist on selecting the best for a correct selection (CS₁) but in the IZ we define any selected subset to be correct (CS₂) if it contains the best population. We find the least favorable configuration (LFC) and the worst configuration (WC) respectively in PZ and IZ. We derive formulas for P(CS₁|LFC), P(CS₂|WC) and the bounds for the expected sample size E(N). We also give tables for the procedure parameters to implement the proposed procedure. An example is given to illustrate how to apply the procedure and how to use the table.     

Primal cutting plane algorithms revisited

Dual fractional cutting plane algorithms, in which cutting planes are used to iteratively tighten a linear relaxation of an integer program, are well-known and form the basis of the highly successful branch-and-cut method. It is rather less well-known that various primal cutting plane algorithms were developed in the 1960s, for example by Young. In a primal algorithm, the main role of the cutting planes is to enable a feasible solution to the original problem to be improved. Research on these algorithms has been almost non-existent.  In this paper we argue for a re-examination of these primal methods. We describe a new primal algorithm for pure 0-1 problems based on strong valid inequalities and give some encouraging computational results. Possible extensions to the case of general mixed-integer programs are also discussed.