X-ray mapping in electron-beam instruments.

This review traces the development of X-ray mapping from its beginning 50 years ago through current analysis procedures that can reveal otherwise obscure elemental distributions and associations. X-ray mapping or compositional imaging of elemental distributions is one of the major capabilities of electron beam microanalysis because it frees the operator from the necessity of making decisions about which image features contain elements of interest. Elements in unexpected locations, or in unexpected association with other elements, may be found easily without operator bias as to where to locate the electron probe for data collection. X-ray mapping in the SEM or EPMA may be applied to bulk specimens at a spatial resolution of about 1 microm. X-ray mapping of thin specimens in the TEM or STEM may be accomplished at a spatial resolution ranging from 2 to 100 nm, depending on specimen thickness and the microscope. Although mapping has traditionally been considered a qualitative technique, recent developments demonstrate the quantitative capabilities of X-ray mapping techniques. Moreover, the long-desired ability to collect and store an entire spectrum at every pixel is now a reality, and methods for mining these data are rapidly being developed.     

Apparent molar volumes of aqueous calcium chloride to 250°C, 400 bars,and from molalities of 0.242 to 6.150

Relative densities of CaCl ₂ (aq) with 0.22ml(mol-kg^–1)6.150 were measured with vibrating- tube densimeters between 25 and 250°C and near 70 and 400 bars. Apparent molar volumes V calculated from the measured density differences were represented with the Pitzer ioninteraction treatment, with appropriate expressions chosen for the temperature and pressure dependence of the virial coefficients of the model. It was found that the partial molar volume at infinite dilution V ^o , and the second and third virial coefficients B ^V and C ^V , were necessary to represent V near the estimated experimental uncertainty. The ionic-strength dependent ^(1)v term in the B ^V coefficient was included in the fit. The representation for V has been integrated with respect to pressure to establish the pressure dependence of excess free energies over the temperature range studied. The volumetric data indicate that the logarithm of the mean ionic activity coefficient, ln ±(CaCl ₂ ), increases by a maximum of 0.3 at 400 bars, 250°C, and 6 mol-kg^–1 as compared with its value at saturation pressure.     

Determination of the fragmentation mechanisms of organophosphorus ions by H2O and D2O atmospheric-pressure ionization tandem mass spectrometry

Dimethylmethyl phosphonate (DMMP), dimethyl phosphite (DMPI), trimethyl phosphite (TMPI) and trimethyl phosphate (TMP) were investigated using H₂O and D₂O atmospheric-pressure ionization (API) tandem mass Spectrometry. All daughter ions could be explained by losses of one or a successive number of stable molecules as opposed to losses of radicals such as the hydride, methyl and methoxy species. Losses of neutral methanol and dimethyl ether and of protonated methanol and formaldehyde ions from all four organophosphorus pseudo-molecular ions were observed. The DMMP and DMPI MH⁺ pseudomolecular ions produced the losses of neutral C₂H₆ and water, respectively. Formaldehyde loss was not observed for the MH⁺ ions, but it was well represented in the decomposition pathways of daughter ions. The D₂O reagent gas highlighted the role of the ionizing proton/ deuteron in the various daughter ions, including m/z 95, 79, 65, 49, 33, 31 and 47. The last ion was found to be isobaric in that m/z 47 and 48 both appeared with similar abundances in the D₂O-API daughter ion mass spectra of TMPI and TMP.     

The synthesis and chemistry of some bis-aziridinylketones and their spectral study

The synthesis and spectral characteristics of certain bis(1-alkyl-3-phenyl-2-aziridinyl)ketones are reported. The reactions of 1,2,4,5-tetrabromo-1,5-diphenyl-3-pentanone ( 2 ) with primary amines are assumed to have a mechanism similar to that of a simple dibromo-ketone. The so-called cis, cis- or trans, trans-configurations of the bis-aziridinylketones were determined by ¹H and ¹³C nmr spectra.     

Separation of Trp-Arg and Arg-Trp using G-quartet-forming DNA oligonucleotides in open-tubular capillary electrochromatography

DNA oligonucleotides that form intramolecular G-quartet structures were investigated as stationary phase reagents for separation of mixtures of the isomeric dipeptides Trp-Arg and Arg-Trp in open-tubular capillary electrochromatography (OTCEC). The oligonucleotides included a thrombin-binding aptamer that forms a biplanar G-quartet structure and an oligonucleotide that forms a 4-plane G-quartet structure. Fluorescence, circular dichroism and UV-visible absorbance spectroscopies were used in batch solution studies to indicate interactions between the dipeptides and the biplanar G-quartet structure. Results for OTCEC separations were compared with results obtained for capillary zone electrophoresis separations on a bare capillary. Temperature studies suggest that resolution is improved when the G-quartet structure is partially destabilized, but control experiments in which potassium chloride was not included in the mobile phase indicate that the G-quartet structure nevertheless plays a role in the separations.     

Surface characterization of Pt electrodes using underpotential deposition of H and Cu: Part I. Pt(100)

This paper is the first in a series describing the in situ surface characterization of platinum electrodes using H and Cu deposited at underpotentials. The surface of a Pt(100) electrode pretreated by simple flame annealing and quenching in aqueous sulfuric acid is shown to contain a high concentration of defects such as vacancies and self-adsorbed Pt atoms. Adsorbed hydrogen is more strongly bound at these defects than on a uniform Pt(100) surface. Potential cycling in 1 M HCl produces a higher concentration of defects, while oxide formation and reduction in 0.5 M H₂SO₄ has the opposite effect. The nature of (100)-like sites at a polycrystalline platinum electrode is also discussed.     

SN2 reactions in the gas phase. Structure of the transition state

The alkylhalide-halide association ions, [RX₂]^? that are observed in the negative chemical ionization mass spectra of alkyl halides appear to be directly related to the corresponding S_N2 transition states in solution. ‘Frontside’ association of halide ions with bridgehead alkyl halides does not occur in our system. The Change in heats and entropies of association for the chloromethane series is consistent with delocalization in the [RX]₂^? ions.     

Solvent extraction and lanthanide complexation studies with new terdentate ligands containing two 1,3,5-triazine moieties

The extracting agent 2,6-bis(4,6-di-pivaloylamino-1,3,5-triazin-2-yl)-pyridine (L(5)) in n-octanol was found, in synergy with 2-bromodecanoic acid, to give D(Am)/D(Eu) separation factors (SFs) between 2.4 and 3.7 when used to extract the metal ions from 0.02-0.12 M HNO(3). Slightly higher SFs (4-6) were obtained in the absence of the synergist when the ligand was used to extract Am(III) and Eu(III) from 0.98 M HNO(3). In order to investigate the possible nature of the extracted species crystal structures of L(5) and the complex formed between Yb(III) with 2,6-bis(4,6-di-amino-1,3,5-triazin-2-yl)-pyridine (L(4)) were also determined. The structure of L(5) shows 3 methanol solvent molecules all of which form 2 or 3 hydrogen bonds with triazine nitrogen atoms, amide nitrogen or oxygen atoms, or pyridine nitrogen atoms. However, L(5) is relatively unstable in metal complexation reactions and loses amide groups to form the parent tetramine L(4). The crystal structure of Yb(L(4))(NO(3))(3) shows ytterbium in a 9-coordinate environment being bonded to three donor atoms of the ligand and three bidentate nitrate ions. The solvent extraction properties of L(4) and L(5) are far inferior to those found for the 2,6-bis-(1,2,4-triazin-3-yl)-pyridines (L(1)) which have SF values of ca. 140 and theoretical calculations have been made to compare the electronic properties of the ligands. The electronic charge distribution in L(4) and L(5) is similar to that found in other terdentate ligands such as terpyridine which have equally poor extraction properties and suggests that the unique properties of L(1) evolve from the presence of two adjacent nitrogen atoms in the triazine rings.     

The synthesis and thermal curing parameters of a novel quinoxaline monomer with terminal ethynyl thermoset and phenylethynyl intramolecular cycloaddition postcure capability

The Synthesis of 3,3′-bis(4-[3-ethynylphenoxy]phenyl)-7,7′-bis(phenylethynyl)-2,2′-diphenyl-6,6′-biquinoxaline (I) was accomplished by the reaction of 2,2′-bis(phenylethynyl)-5,5′-diaminobenzidine (II) and 4-(3-ethynylphenoxy)benzil. Thermal analysis of I indicated a softening temperature of 107°C, followed by an exotherm above 150°C that corresponded to a independent crosslinking reaction of the terminal acetylene groups and an intramolecular cycloaddition (IMC) reaction of the 2,2′-bis(phenylethynyl)biphenyl moieties. In the synthetic work substantial improvements were made in the synthesis of II. The sample of I was cured at 200°C and the maximum partially cured transition temperature attained was 280°C. A sample of 3,3′-bis(4,[3-ethynylphenoxy]phenyl)-2,2′-diphenyl-6,6′-biquinoxaline (IV) was similarly tested as a model without IMC capability and its corresponding value was 250°C. The difference between these two values is discussed briefly.     

Abnormally mild synthesis of bis(dithiolo)pyrroles from 2,5-dimethylpyrroles

[chemical reaction: see text]. Treatment of N-substituted 2,5-dimethylpyrroles 2 with an equilibrated mixture of disulfur dichloride and DABCO in chloroform at 0 degrees C gives pentathiepinopyrroles 3 in moderate yields; further reaction of 3 with the same mixture at room temperature leads, in an extensive reaction cascade, to bis(dithiolo)pyrroles 4 in high yield; 2 can be converted into 4 in a one-pot operation under unusually mild conditions.