A 1H NMR Study of the Kinetics of the Reaction of Diisocyanates with Ethlene Oxide-Dimethylsiloxane-Ethylene Oxide Block Copolymer

The reaction of pure 2–4 and 2–6 tolylene diisocyanate with an OH terminated ethylene oxide-dimethylsiloxane-ethylene oxide ABA block copolymer was carried out directly in a n.m.r. tube. The kinetic of the reaction was studied by ¹H nmr spectroscopy.     

实际量子密钥分配扩展BB84协议窃听下的安全性分析

考虑强衰减激光脉冲技术实现的准单光子源和量子信道损耗以及窃听者Eve窃听能力有限等实际情况, 提出了一种窃听装置;同时对扩展BB84协议的各种窃听做了全面分析,计算得出发送者Alice/窃听者Eve所获得的交互信息量和发送者Alice/接收者Bob所能容忍的误码率上限,以此作为检测量子信道安全性的标准,同时得出Breidbart基/分束攻击相结合的方法是比截取/重发更为有效的窃听方案.     

Optical Trapping with Focused Surface Waves

Near-field optical trapping can be realized with focused evanescent waves that are excited at the water–glass interface due to the total internal reflection, or with focused plasmonic waves excited on the water–gold interface. Herein, the performance of these two kinds of near-field optical trapping techniques is compared using the same optical microscope configuration. Experimental results show that only a single-micron polystyrene bead can be trapped by the focused evanescent waves, whereas many beads are simultaneously attracted to the center of the excited region by focused plasmonic waves. This difference in trapping behavior is analyzed from the electric field intensity distributions of these two kinds of focused surface waves and the difference in trapping behavior is attributed to photothermal effects due to the light absorption by the gold film.     

Assembly of copolymer blend on nanopatterned surfaces: a molecular simulation study

We report a molecular simulation study on the assembly of an (A7B5)5/A7B5 copolymer blend on nanopatterned surfaces. The density distributions, anisotropic radii of gyration, and conformations of both copolymers are quantitatively characterized. As the width of stripes on the surface decreases, the shape and thickness of the assembled film are found to be in qualitative agreement with those from experiments. The simulation results indicate that the shape and conformation of ordered film can be modulated by tuning the adsorption energy between the surface and the polymer or by adjusting the width of the stripes on the surface. We can regulate the width of the stripes to obtain a desired polymer conformation without altering the assembled film. In remarkable contrast to the pure copolymer, the radii of gyration of the blend in three directions are consistently smaller. The simulation reveals that the addition of a short chain during assembly is of central importance in restructuring the conformations of the long chain.     

手性有机酸薄层色谱保留指数的拓扑模型

基于Kier的分子连接性指数及邻接矩阵提出新型分子连接性指数（^mG_t^v）;引入手性指数（w_j）并建立了手性连接性指数（^mG_t^v）：^mG_t^v=^mG_t^v×w_j。^mG_t^v适用于手性分子、非手性分子及内消旋异构体的结构差异表征。用多元统计回归研究18种手性羟酸和氨基酸的薄层色谱保留指数（R_M）与^mG_t^v的定量构效关系,经最佳变量子集回归建立其四元数学模型,传统的判定系数（R²）为0.973,逐一剔除法（leave-one-out,LOO）的交互验证系数（Q²）为0.950,结果证明具有良好的稳健性及预测能力。根据进入该模型的4个手性连接性指数（⁰C_p^v、²C_p^v、C_ch^v、⁵C_p^v）可知,影响手性有机酸保留指数的主要因素是分子的二维结构特征和分子的手性特征以及柔韧性、折叠程度等三维结构因素。从上可见,新建手性连接性指数对手性有机酸的保留指数表征具有合理性与有效性,为预测手性有机酸的保留指数提供了一种有效方法。     

Molecularly imprinted polymers on the surface of silica microspheres via sol‐gel method for the selective extraction of streptomycin in aqueous samples

Streptomycin‐imprinted silica microspheres were prepared by combining a surface molecular‐imprinting technique with the sol‐gel method. A mixture of tetrahydrofuran, ethanol, and water (6:1:1, v/v/v) was selected as dispersing solvent while 3‐aminopropyltriethoxysilane and triethoxyphenylsilane acted as functional monomers, and tetraethyl orthosilicate as a cross‐linker. Characterization of the molecularly imprinted polymers was conducted using scanning electron microscope and dynamic binding experiments. As compared to the nonimprinted polymers, the imprinted polymers exhibited a higher degree of saturated adsorption volume up to 26.3 mg/g, and better selectivity even in an aqueous solution with interfering compounds, including dihydrostreptomycin, neomycin, and tetracycline. The adsorption ability and selectivity were observed to be influenced by the mole ratio of 3‐aminopropyltriethoxysilane and triethoxyphenylsilane. Feasibility of the polymers to be used for actual application was also evaluated with spiked samples, indicating great potential for large‐scale applications. Moreover, the streptomycin‐imprinted polymers can be repeatedly used for 12 cycles without losing original performance, which is beneficial for commercial use.     

制备方法对Ce0.5Zr0.5O2固溶体微观晶相结构及还原性能影响的研究

采用不同合成方法制备了4种组成为Ce0.5Zr0.5O2的铈锆固溶体.通过XRD,BET,H2-TPR,HREM以及SEAD等表征手段,研究了微观晶相结构对铈锆固溶体还原性能的影响规律,以及对固溶体储放氧能力的影响.分析结果表明,在同一组成下,不同制备方法得到截然不同的晶相组成,4种固溶体包含4种不同的晶相组合.通过对微观晶相结构的定量分析,发现立方相的形成对促进固溶体的还原性能起到重要作用.其中,反相微乳法制得的铈锆固溶体能够形成完整的立方相结构,在H2-TPR还原过程中耗氢量最大,表明其具有优良的可还原性及储放氧能力,适合作为TWC,POX等催化剂载体.     

非线性粘弹性大挠度梁的动力学模型及其简化

本文建立了描述几何非线性均匀梁动力学行为的偏微分－－积分方程,梁的材料满足Ｌｅａｄｅｍａｎ非线性本构关系,对于两端简支的情形用Ｇａｌｅｒｋｉｎ方法进行了截断简化为常微分－－积分方程,然后引进附加变量的方法进一步简化为常微分方程组。     

Co_3O_4/BiOI复合催化剂的制备及其光催化性能

考察了两种方法制备的BiOI光催化剂,结果显示溶剂热法制备的BiOI比液相沉淀法制备的BiOI具有更好的光催化活性.然后,以溶剂热法制备的BiOI采用浸渍法制备了CoOx/BiOI复合催化剂,用X射线衍射(XRD)、紫外-可见(UV-vis)漫反射光谱、透射电子显微镜(TEM)等手段对其进行了表征,探讨了煅烧温度,煅烧时间以及Co掺杂量对其光催化性能的影响.结果显示:在300℃煅烧2h,Co的掺杂量为2.0%(Co/BiOI)的条件下,CoOx/BiOI复合物紫外光催化活性最高.结构研究表明,Co是以Co3O4的形式呈针状分布在团聚后的BiOI的表面,这有效地促进了BiOI的光催化性能.     

DYNAMIC CHARACTERISTICS IN INCOMPRESSIBLE HYPERELASTIC CYLINDRICAL MEMBRANES

In this paper, the dynamic characteristics are examined for a cylindrical membrane composed of a transversely isotropic incompressible hyperelastic material under an applied uniform radial constant pressure at its inner surface. A second-order nonlinear ordinary differential equation that approximately describes the radial oscillation of the inner surface of the membrane with respect to time is obtained. Some interesting conclusions are proposed for different materials, such as the neo-Hookean material, the Mooney-Rivlin material and the Rivlin-Saunders material. Firstly, the bifurcation conditions depending on the material parameters and the pressure loads are determined. Secondly, the conditions of periodic motion are presented in detail for membranes composed of different materials. Meanwhile, numerical simulations are also provided.