Structure and reactivity of bis(silyl) dihydride complexes (PMe(3))(3)Ru(SiR(3))(2)(H)(2): model compounds and real intermediates in a dehydrogenative C-Si bond forming reaction

A series of stable complexes, (PMe(3))(3)Ru(SiR(3))(2)(H)(2) ((SiR(3))(2) = (SiH(2)Ph)(2), 3a; (SiHPh(2))(2), 3b; (SiMe(2)CH(2)CH(2)SiMe(2)), 3c), has been synthesized by the reaction of hydridosilanes with (PMe(3))(3)Ru(SiMe(3))H(3) or (PMe(3))(4)Ru(SiMe(3))H. Compounds 3a and 3c adopt overall pentagonal bipyramidal geometries in solution and the solid state, with phosphine and silyl ligands defining trigonal bipyramids and ruthenium hydrides arranged in the equatorial plane. Compound 3a exhibits meridional phosphines, with both silyl ligands equatorial, whereas the constraints of the chelate in 3c result in both axial and equatorial silyl environments and facial phosphines. Although there is no evidence for agostic Si-H interactions in 3a and 3b, the equatorial silyl group in 3c is in close contact with one hydride (1.81(4) A) and is moderately close to the other hydride (2.15(3) A) in the solid state and solution (nu(Ru.H.Si) = 1740 cm(-)(1) and nu(RuH) = 1940 cm(-)(1)). The analogous bis(silyl) dihydride, (PMe(3))(3)Ru(SiMe(3))(2)(H)(2) (3d), is not stable at room temperature, but can be generated in situ at low temperature from the 16e(-) complex (PMe(3))(3)Ru(SiMe(3))H (1) and HSiMe(3). Complexes 3b and 3d have been characterized by multinuclear, variable temperature NMR and appear to be isostructural with 3a. All four complexes exhibit dynamic NMR spectra, but the slow exchange limit could not be observed for 3c. Treatment of 1 with HSiMe(3) at room temperature leads to formation of (PMe(3))(3)Ru(SiMe(2)CH(2)SiMe(3))H(3) (4b) via a CH functionalization process critical to catalytic dehydrocoupling of HSiMe(3) at higher temperatures. Closer inspection of this reaction between -110 and -10 degrees C by NMR reveals a plethora of silyl hydride phosphine complexes formed by ligand redistribution prior to CH activation. Above ca. 0 degrees C this mixture converts cleanly via silane dehydrogenation to the very stable tris(phosphine) trihydride carbosilyl complex 4b. The structure of 4b was determined crystallographically and exhibits a tetrahedral P(3)Si environment around the metal with the three hydrides adjacent to silicon and capping the P(2)Si faces. Although strong Si.HRu interactions are not indicated in the structure or by IR, the HSi distances (2.00(4) - 2.09(4) A) and average coupling constant (J(SiH) = 25 Hz) suggest some degree of nonclassical SiH bonding in the RuH(3)Si moiety. The least hindered complex, 3a, reacts with carbon monoxide principally via an H(2) elimination pathway to yield mer-(PMe(3))(3)(CO)Ru(SiH(2)Ph)(2), with SiH elimination as a minor process. However, only SiH elimination and formation of (PMe(3))(3)(CO)Ru(SiR(3))H is observed for 3b-d. The most hindered bis(silyl) complex, 3d, is extremely labile and even in the absence of CO undergoes SiH reductive elimination to generate the 16e(-) species 1 (DeltaH(SiH)(-)(elim) = 11.0 +/- 0.6 kcal x mol(-)(1) and DeltaS(SiH)(-)(elim) = 40 +/- 2 cal x mol(-)(1) x K(-)(1); Delta = 9.2 +/- 0.8 kcal x mol(-)(1) and Delta = 9 +/- 3 cal x mol(-)(1).K(-)(1)). The minimum barrier for the H(2) reductive elimination can be estimated, and is higher than that for silane elimination at temperatures above ca. -50 degrees C. The thermodynamic preferences for oxidative additions to 1 are dominated by entropy contributions and steric effects. Addition of H(2) is by far most favorable, whereas the relative aptitudes for intramolecular silyl CH activation and intermolecular SiH addition are strongly dependent on temperature (DeltaH(SiH)(-)(add) = -11.0 +/- 0.6 kcal x mol(-)(1) and DeltaS(SiH)(-)(add) = -40 +/- 2 cal.mol(-)(1) x K(-)(1); DeltaH(beta)(-CH)(-)(add) = -2.7 +/- 0.3 kcal x mol(-)(1) and DeltaS(beta)(-CH)(-)(add) = -6 +/- 1 cal x mol(-)(1) x K(-)(1)). Kinetic preferences for oxidative additions to 1 - intermolecular SiH and intramolecular CH - have been also quantified: Delta = -1.8 +/- 0.8 kcal x mol(-)(1) and Delta = -31 +/- 3 cal x mol(-)(1).K(-)(1); Delta = 16.4 +/- 0.6 kcal x mol(-)(1) and Delta = -13 +/- 6 cal x mol(-)(1).K(-)(1). The relative enthalpies of activation (-)(1) x K(-)(1)). Kinetic preferences for oxidative additions to 1 - intermolecular SiH and intramolecular CH - have been also quantified: Delta (H)SiH(add) = 1.8 +/- 0.8 kcal x mol(-)(1) and Delta S((SiH-add) =31+/- 3 cal x mol(-)(1) x K(-)(1); Delta S (SiH -add) = 16.4 +/- 0.6 kcal x mol(-)(1) and =Delta S (SiH -CH -add) =13+/- 6 cal x mol(-)(1) x K(-)(1). The relative enthalpies of activation are interpreted in terms of strong SiH sigma-complex formation - and much weaker CH coordination - in the transition state for oxidative addition.     

A 13C-NMR spectral study of cellulose and glucopyranose dissolved in the NH3/NH4SCN solvent system

The ¹³C-NMR chemical shifts of a cellulose with a DP_w of 23 dissolved in the NH₃/NH₄SCN solvent system were found to be very similar to those of cellulose dissolved in DMSO (cellulose oligomers), in the LiCl/DMAC system and in the N-methylmorpholine N-oxide/DMSO system. It was concluded from this that cellulose does not react with the NH₃/NH₄SCN solvent. It was found, however, that glucose reacts with the solvent at C-1 to form β-D -glucopyranosy-lamine. Separation of this compound from the solvent resulted in another compound which was determined to be β,β-di-D -glucopyranosylamine. The compounds β-D -glucopyranosylamine, N-acetyl-2,3,4,6-tetra-O-acetyl-β-D -glucopyranosylamine, β,β-di-D -glucopyranosylamine, α,β-di-D -glucopyranosylamine, 2,3,4,6,2′,3′,4′,6′-octa-O-acetyl-α,β-di-D -glucopyranosylamine were all synthesized and the ¹³C-NMR chemical shifts of these compounds are reported. It was also found that for the low-DP cellulose sample which was used the reducing end group existed and had reacted with the solvent to form an amine at C-1.     

Novel diastereoselective synthesis of (E)- and (Z)-allylsilanes via organoboranes

A simple, novel diastereoselective synthesis of both (E)- and (Z)-allylsilanes via organoboranes is developed. (E)-1-Alkenylboronate esters easily prepared from the corresponding terminal alkynes via hydroboration with dibromoborane-methyl sulfide complex followed by treatment with 1,3-propane diol readily react with trimethylsilylmethyllithium at −78 °C in methanol followed by reaction with iodine in methanol to produce the corresponding (Z)-allylsilanes in high yields (72-80%) and in high stereochemical purities (98% as evidenced by CMR spectral data). Similarly, the (Z)-1-alkenylboronate esters react with trimethylsilylmethyllithium at −78 °C in methanol followed by treatment with iodine in methanol to produce the corresponding (E)-allylsilanes in moderate yields (57-65%) in high stereochemical purities (>98% as revealed by CMR spectral data).     

Synthesis of an elusive,stable 2-azaallyl radical guided by electrochemical and reactivity studies of 2-azaallyl anions

The super electron donor (SED) ability of 2-azaallyl anions has recently been discovered and applied to diverse reactivity, including transition metal-free cross-coupling and dehydrogenative cross-coupling processes. Surprisingly, the redox properties of 2-azaallyl anions and radicals have been rarely studied. Understanding the chemistry of elusive species is the key to further development. Electrochemical analysis of phenyl substituted 2-azaallyl anions revealed an oxidation wave at E_1/2 or E_pa = −1.6 V versus Fc/Fc⁺, which is ∼800 mV less than the reduction potential predicted (E_pa = −2.4 V vs. Fc/Fc⁺) based on reactivity studies. Investigation of the kinetics of electron transfer revealed reorganization energies an order of magnitude lower than commonly employed SEDs. The electrochemical study enabled the synthetic design of the first stable, acyclic 2-azaallyl radical. These results indicate that the reorganization energy should be an important design consideration for the development of more potent organic reductants.

The super electron donor (SED) capabilities of 2-azaallyl anions has recently been discovered and applied to diverse reactivity; their structures and electron transfer characteristics are reported herein.     

Boiling Temperature and Reversed Deliquescence Relative Humidity Measurements for Mineral Assemblages in the NaCl + NaNO3 + KNO3 + Ca(NO3)2 + H2O System

Boiling temperature measurements have been made at ambient pressure for saturated ternary solutions of NaCl + KNO₃ + H₂O, NaNO₃ + KNO₃ + H₂O, and NaCl + Ca(NO₃)₂ + H₂O over the full composition range, along with those of the single salt systems. Boiling temperatures were also measured for the four component NaCl + NaNO₃ + KNO₃ + H₂O and five component NaCl + NaNO₃ + KNO₃ + Ca(NO₃)₂ + H₂O mixtures, where the solute mole fraction of Ca(NO₃)₂, x{Ca(NO₃)₂}, was varied between 0 and 0.25. The maximum boiling temperature found for the NaCl + KNO₃ + H₂O system is ≈134.9 ^∘C; for the NaNO₃ + KNO₃ + H₂O system is ≈165.1 ^∘C at x(NaNO₃) ≈ 0.46 and x(KNO₃) ≈ 0.54; and for the NaCl + Ca(NO₃)₂ + H₂O system is 164.7 ± 0.6 ^∘C at x{NaCl} ≈ 0.25 and x{Ca(NO₃)₂} ≈ 0.75. The NaCl + NaNO₃ + KNO₃ + Ca(NO₃)₂ + H₂O system forms molten salts below their maximum boiling temperatures and the temperatures corresponding to the cessation of boiling (dry-out temperatures) of these liquid mixtures were determined. These dry-out temperatures range from ≈300 ^∘C when x{Ca(NO₃)₂} = 0 to ≥ 400 ^∘C when x{Ca(NO₃)₂} = 0.20 and 0.25. Mutual deliquescence/efflorescence relative humidity (MDRH/MERH) measurements were also made for the NaNO₃ + KNO₃ and NaCl + NaNO₃ + KNO₃ salt mixture from 120 to 180 ^∘C at ambient pressure. The NaNO₃ + KNO₃ salt mixture has a MDRH of 26.4% at 120 ^∘C and 20.0% at 150 ^∘C. This salt mixture also absorbs water at 180 ^∘C, which is higher than expected from the boiling temperature experiments. The NaCl + NaNO₃ + KNO₃ salt mixture was found to have a MDRH of 25.9% at 120 ^∘C and 10.5% at 180 ^∘C. The investigated mixture compositions correspond to some of the major mineral assemblages that are predicted to control brine composition due to the deliquescence of salts formed in dust deposited on waste canisters in the proposed nuclear repository at Yucca Mountain, Nevada.     

Improved detection of the histamine receptor on human peripheral blood mononuclear cells by crosslinking using tritiated as compared with radioiodinated histamine

In order to detect histamine receptors on the surface of human peripheral blood mononuclear cells, the cells were incubated in the presence of radiolabelled histamine and then the bifunctional crosslinker disuccimidyl suberate was added in various concentrations. They were then solubilized with sodium dodecyl sulphate, boiled, reduced and the lysate separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Both 3H and 125I-radiolabelled ligands bound to a 16 kDa band, to be defined although a much clearer and obviously unequivocal signal was obtained with 3H-labelled histamine. This molecule migrated with the same mass on sodium dodecyl sulfate-polyacrylamide gel electrophoresis as a 16 kDa subunit which had been purified on a histamine affinity column from Triton X-100 solubilized mononuclear cells, indicating it to be the ligand-binding subunit for the histamine receptor on these cells. For 3H, fluorography with Entensify was required to obtain an autoradiographic signal. Although 3H took much longer to give a signal than 125I, the considerable background, artefacts and heavy lane trailing seen with [125I] histamine were completely abrogated when [3H]histamine was used. In addition, the distinction between specific and nonspecific binding was more clearly seen using [3H]histamine. The modifications reported here which improve signal detection for 3H should encourage the use of tritiated ligands in radioreceptor crosslinking, particularly those of low molecular weight which might otherwise undergo steric modification due to iodination, this having the potential for interfering with receptor ligand binding.     

The oxidative decarboxylation of polyaminocarboxylic acids

Summary The rates of oxidation of four chelating agents, NTA, EDTA, CDTA, and DTPA with Ce(IV), in sulfuric acid media, were determined spectrophotometrically by a stopped-flow technique. The reductive ability is in the order CDTA > EDTA > DTPA > NTA. The influence of varying the acidity of the medium was studied, and in each case a maximum in the rate constant vs. [H⁺] plot was observed. A possible interpretation of the reactivities and the influence of acidity is advanced.

---

Oxydative Decarboxylierung von PolyaminocarbonsäurenII. Vergleichende kinetische Untersuchung der Oxydation von NTA, ÄDTA, CDTA und DTPA mit Ce(IV) in saurer Lösung

Zusammenfassung Die Oxydationsgeschwindigkeiten von 4 Chelaten (NTA, ÄDTA, CDTA und DTPA) mit Ce(IV) in saurer Lösung wurden spektrophotometrisch mit Hilfe der stopped-flow-Technik bestimmt. Die Reduzierfähigkeit nimmt in der Reihenfolge CDTA > ÄDTA > DTPA > NTA ab. Der Einfluß verschiedener Säuregehalte in der Lösung wurde untersucht, und in jedem Fall wurde ein Maximum in der graphischen Darstellung der Geschwindigkeitskonstante gegen [H⁺] beobachtet. Eine mögliche Erklärung des Reaktionsvermögens und des Säureeinflusses wird gegeben.

---

---

Part I: Z. Anal. Chem. 246, 231 (1969).     

Retaining and recovering enzyme activity during degradation of TCE by methanotrophs

To determine if compounds added during trichloroethylene (TCE) degradation could reduce the loss of enzyme activity or increase enzyme recovery, different compounds serving as energy and carbon sources, pH buffers, or free radical scavengers were tested. Formate and formic acid (reducing power and a carbon source), as well as ascorbic acid and citric acid (free radical scavengers) were added during TCE degradation at a concentration of 2 mM. A saturated solution of calcium carbonate was also tested to address pH concerns. In the presence of formate and methane, only calcium carbonate and formic acid had a beneficial effect on enzyme recovery. The calcium carbonate and formic acid both reduced the loss of enzyme activity and resulted in the highest levels of enzyme activity after recovery.