Isomorphisms between lattices of almost normal subgroups

A subgroupH of a groupG is said to bealmost normal inG if it has only finitely many conjugates inG. The setan(G) of almost normal subgroups ofG is a sublattice of the lattice of all subgroups ofG. Isomorphisms between lattices of almost normal subgroups ofFC-soluble groups are considered in this paper. In particular, properties of images of normal subgroups under such an isomorphism are investigated.     

The MAST-edge centred lumped scheme for the flow simulation in variably saturated heterogeneous porous media

A novel methodology is proposed for the solution of the flow equation in a variably saturated heterogeneous porous medium. The computational domain is descretized using triangular meshes and the governing PDEs are discretized using a lumped in the edge centres numerical technique. The dependent unknown variable of the problem is the piezometric head. A fractional time step methodology is applied for the solution of the original system, solving consecutively a prediction and a correction problem. A scalar potential of the flow field exists and in the prediction step a MArching in Space and Time (MAST) formulation is applied for the sequential solution of the Ordinary Differential Equation of the cells, ordered according to their potential value computed at the beginning of the time step. In the correction step, the solution of a large linear system with order equal to the number of edges is required. A semi-analytical procedure is also proposed for the solution of the prediction step. The computational performance, the order of convergence and the mass balance error have been estimated in several tests and compared with the results of other literature models.     

Investigation of a Pt–Fe/C catalyst for oxygen reduction reaction in direct ethanol fuel cells

Three cathode catalysts (60% Pt/C, 30% Pt/C and 60% Pt–Fe/C), with a particle size of about 2–3 nm, were prepared to investigate the effect of ethanol cross-over on cathode surfaces. All samples were studied in terms of structure and morphology by using X-ray diffraction (XRD) and transmission electron microscopy (TEM) analyses. Their electrocatalytic behavior in terms of oxygen reduction reaction (ORR) was investigated and compared using a rotating disk electrode (RDE). The tolerance of cathode catalysts in the presence of ethanol was evaluated. The Pt–Fe/C catalyst showed both higher ORR activity and tolerance to ethanol cross-over than Pt/C catalysts. Moreover, the more promising catalysts were tested in 5 cm² DEFC single cells at 60 and 80 °C. An improvement in single cell performance was observed in the presence of the Pt–Fe catalyst, due to an enhancement in the oxygen reduction kinetics. The maximum power density was 53 mW cm⁻² at 2 bar rel. cathode pressure and 80 °C.     

Metallocene ion pairs: A direct insight into the reaction equilibria and polymerization by 13C NMR spectroscopy

The reaction equilibria of Cp₂Ti¹³CH₃Cl and Cp₂Ti(CH₃)₂ with AlMe₃ (TMA) and/or methylaluminoxane (MAO) have been investigated by ¹³C NMR. Several adducts have been identified. A study of the ¹³C 90% enriched ethylene polymerization in an NMR tube in the presence of the above catalytic systems, in the most experimentally significant conditions, and a comparison of the NMR data with the catalytic activity have been made as well. It has been shown that: i) some species are side products, inactive for addition ethylene polymerization; ii) active cation-like species such as Cp₂TiMe⁺Cl·[AlMeO]_n- and Cp₂TiMe⁺Me·[AlMeO]_n- are formed in titanocene-MAO systems. Concerning the role of AlMe₃, contained in MAO solutions, it has been shown that: a) AlMe₃ is mainly bound to MAO; b) if some “free” AlMe₃ exists in solution it is not the actual cocatalyst in the metallocene-MAO based catalytic systems; c) the amount of AlMe₃ influences either active or inactive species.     

Electrochemical rectification by redox-labeled bioconjugates: molecular building blocks for the construction of biodiodes

In the present work, we describe the properties of a bifunctional redox-labeled bioconjugate at electrode surfaces mediating the electron transfer across the electrode-electrolyte interface. We show that the assembly of ferrocene-labeled streptavidin on biotinylated electrodes results in a reproducible unidirectional current flow in the presence of electron donors in solution. Such rectifying films were built up by spontaneous binding of tetrameric streptavidin molecules to biotin centers immobilized on the electrode surface. Due to the high affinity of biotin to streptavidin, such bifunctional films completely bind any biotinylated compounds. The charge transport between donors in solution and the Au electrode is mediated by the ferrocene moieties, allowing us to develop a molecular rectifier. Our experimental results suggest that such redox-labeled proteins with a high binding capacity constitute a promising alternative to organic compounds used in molecular electronics.     

Polycarbide nickel clusters containing interstitial Ni(eta2-C2)4 and Ni2(micro-eta2-C2)4 acetylide moieties: mimicking the supersaturated Ni-C solutions preceding the catalytic growth of CNTs with the structures of [HNi25(C2)4(CO)32]3- and [Ni22(C2)4(CO)28Cl]3-

Reaction of [Ni(6)(CO)(12)](2-) with CCl(4) in CH(2)Cl(2) gives the [HNi(25)(C(2))(4)(CO)(32)](3-) and [Ni(22)(C(2))(4)(CO)(28)Cl](3-) carbonyl clusters containing interstitial Ni(eta(2)-C(2))(4) and Ni(2)(micro-eta(2)-C(2))(4) acetylide moieties.     

Catalysts for low-temperature methanol synthesis. I. A study of the reduction process

A study of the reduction of CuO in a ternary oxide system (Cu:Zn:Al, atomic ratio 62:14:24) demonstrated that at lower temperatures it occurred in two stages, whereas at higher temperatures it was no longer possible to display the formation of Cu₂O. The rate of reduction of CuO was strongly reduced on decreasing the partial pressure of hydrogen, while the presence of CO₂ stabilized the Cu₂O, delaying the reduction to copper. On the basis of simpler systems it was possible to demonstrate the activating effect of Al₂O₃ and the delaying effect of ZnO on the reduction of CuO.     

Ni‐Catalyzed Asymmetric Cycloisomerization of Dienes by Using TADDOL Phosphoramidites

A library of α,α,α,α‐tetraaryl‐1,3‐dioxolane‐4,5‐dimethanol (TADDOL)‐based phosphoramidites has been synthesized and applied in the Ni‐catalyzed cycloisomerization of different dienes. Through the systematic variation of the three structural motifs of the lead structure, that is, the amine moiety, the protecting group, and the aryl substituents, the ligand features could be optimized for the asymmetric cycloisomerization of the model substrate diethyl diallylmalonate. The substrate scope of the new catalytic system was extended to other diallylic substrates, including unsymmetrical dienes. Overall remarkably high activities of up to approximately 13 500 h^?1, very high selectivities toward five‐membered exo‐methylenecyclopentanes, and enantioselectivities of up to 92 % ee have been achieved.     

Potential of prodendronic polyamines with modulated segmental charge density as novel coating for fast and efficient analysis of peptides and basic proteins by CE and CE‐MS

In this work, the suitability of a new polymer family has been investigated as capillary coatings for the analysis of peptides and basic proteins by CE. This polymer family has been designed to minimize or completely prevent protein–capillary wall interactions and to modify the EOF. These coating materials are linear polymeric chains bearing as side cationizable moiety a dentronic triamine derived from N,N,N’,N’‐tetraethyldiethylenetriamine (TEDETA), which is linked to the backbone through a spacer (unit labeled as TEDETAMA). Four different polymers have been prepared and evaluated: a homopolymer which comprised only of those cationizable repetitive units of TEDETAMA, and three copolymers that randomly incorporate TEDETAMA together with neutral hydrosoluble units of N‐(2‐hydroxypropyl) methacrylamide (HPMA) at different molar percentages (25:75, 50:50 and 75:25). It has been demonstrated that the composition of the copolymers influences the EOF and therefore the separation of the investigated biopolymers. Among the novel polymers studied, poly‐(TEDETAMA‐co‐HPMA) 50:50 copolymer was successfully applied as coating material of the inner capillary surface in CE‐UV and CE‐MS, providing EOF reversing together with fast and efficient baseline separation of peptides and basic proteins. Finally, the feasibility of the polymer‐coated capillary was shown through the analysis of lysozyme in a cheese sample.     

Improved coupled-column liquid chromatographic method for the determination of glyphosate and aminomethylphosphonic acid residues in environmental waters

An existing method for the determination of glyphosate and its main metabolite aminomethylphosphonic acid (AMPA) in water has been improved. It is based on precolumn derivatization with the fluorescent reagent 9-fluorenylmethylcloroformate (FMOC) followed by large-volume injection in a coupled-column LC system using fluorescence detection (LC-LC-FD). The derivatization step was slightly modified by changing parameters such as volume and/or concentration of sample and reagents to decrease the limits of quantification (LOQ) of glyphosate and AMPA to 0.1 microg/l. Additionally, the use of Amberlite IRA-900 for preconcentration of glyphosate, prior to the derivatization step, was investigated; the LOQ of glyphosate was lowered to 0.02 microg/l. Drinking, surface and ground water spiked with glyphosate and AMPA at 0.1-10 microg/l concentrations were analysed by the improved LC-LC-FD method. Recoveries were 87-106% with relative standard deviations lower than 8%. Drinking and ground water spiked with glyphosate at 0.02 and 0.1 microg/l were analysed after preconcentration on the anion-exchange resin with satisfactory recoveries (94-105%) and precision (better than 8%).