ABSTRACT Novel liquid crystalline Janus dendrimers that combine a mesogenic block and an electroactive block have been synthesised. The mesogenic block is based on two third-generation Percec-type dendrons bearing six or eight terminal dodecyloxy alkyl chains, whereas the electroactive blocks are formed by one or two carbazole units. The liquid crystal behaviour was investigated by polarised-light optical microscopy, differential scanning microscopy and X-ray diffraction. The Janus dendrimers with one electroactive unit exhibited cubic or columnar liquid crystal phases, whereas the Janus dendrimers with two electroactive units did not show liquid crystalline behaviour. The UV-vis absorption and emission properties of the Janus dendrimers were investigated. The spectra suggested the existence of π-π stacking and the formation of aggregates in the solid state. Electrodeposition of the carbazole-containing dendrimers afforded semi-globular particles in which the number of electropolymerizable units and the flexible or rigid character of the linker have a decisive influence in the particle size. 相似文献
Summary Different functionalized alkyl 3-oxo-butyrates (2) were reacted with 5-amino-3-Q-1H-1,2,4-triazoles (1) to yield3 and4 type 1,2,4-triazolo[1,5-a]pyrimidinones. In case of2 (R1=methyl,R2=1-ethoxycarbonylethyl,R3=ethyl) beside the corresponding derivative4 the unexpected 5,6-dihydro-6,8-dimethyl-7-ethoxycarbonyl-3-methylthio-1,2,4-triazolo[4,3-a]-1,3-diazepin-5(9H)-one (7) was isolated, representing a novel ring system.
Über Triazole, 19. Mitt.: Die Reaktion von 5-Amino-1,2,4-triazolen mit funktionalisierten Acetoessigestern
Zusammenfassung Verschiedene funktionalisierte 3-Oxo-buttersäurealkylester (2) wurden mit 5-Amino-3-Q-1H-1,2,4-triazolen (1) umgesetzt, wobei 1,2,4-Triazolo[1,5-a]pyrimidinone der Typen3 und4 erhalten wurden. Im Fall von2 (R1=Methyl,R2=1-Ethoxycarbonylethyl,R3=Ethyl) wurde neben dem erwarteten Derivat4 das unerwartete 5,6-Dihydro-6,8-dimethyl-7-ethoxycarbonyl-3-me-thylthio-1,2,4-triazolo[4,3-a]-1,3-diazepin-5(9H)-on (7) isoliert, welches ein neues Ringsystem darstellt.
Five chemical compounds, CuMoO4, Cu3Mo2O9, Cu2Mo3O10, Cu6Mo4O15, and Cu4?x Mo3O12 (0.10 ? x ? 0.40), were identified in the system Cu2OCuOMoO3 and characterized by DTA, X-ray powder patterns, ir spectra, and magnetic properties. Cupric molybdates CuMoO4 and Cu3Mo2O9 are stable in air up to 820 and 855°C, respectively, melting at these temperatures with simultaneous decomposition (oxygen loss). Congruent mp of cuprous molybdates Cu2Mo3O10 and Cu6Mo4O15, in argon, are 532 and 466°C, respectively. Nonstoichiometric phase Cu4?x Mo3O12 = Cu2+3Cu01?xMo6+3O12, melts in argon between 630 and 650°C depending on the value of x and at 525–530°C undergoes polymorphic transformation. Areas of coexistence of the above-mentioned phases are determined. The μeff of Cu2+ ions and θ values are: 1.80 B.M. and 28°K for CuMoO4, 1.71 B.M. and ? 12°K for Cu3Mo2O9, and 1.74 B.M. and ? 93°K for Cu4?xMo3O12. Below 200°K CuMoO4 becomes antiferromagnetic. Cu2Mo3O10 and Cu6Mo4O15 show weak temperature-independent paramagnetism. 相似文献
Summary 4(5)-D-Arabinotetrahydroxybutylimidazoline-2-thione, THBIT, is proposed as a new reagent for the spectrophotometric determination of Pd(II). Pd(II) forms 11, 12 and 14 complexes with THBIT. The system conforms to Beer's law up to 5g/ml palladium concentration in aqueous medium (molar absorptivity, 1.99×104 l· mole–1·cm–1 at 338 nm). The most serious interference is from Hg(II), Os(VIII), Ru(IV), Cr(VI), V(V) and S2O32–. The method has been used successfully for the determination of palladium in catalysts and synthetic samples. 相似文献
The construction and performance under flow-injection conditions of an integrated amperometric biosensor for hydrogen peroxide is reported. The design of the bioelectrode is based on a mercaptopropionic acid (MPA) self-assembled monolayer (SAM) modified gold disk electrode on which horseradish peroxidase (HRP, 24.3 U) was immobilized by cross-linking with glutaraldehyde together with the mediator tetrathiafulvalene (TTF, 1 μmol), which was entrapped in the three-dimensional aggregate formed.
The amperometric biosensor allows the obtention of reproducible flow injection amperometric responses at an applied potential of 0.00 V in 0.05 mol L−1 phosphate buffer, pH 7.0 (flow rate: 1.40 mL min−1, injection volume: 150 μL), with a range of linearity for hydrogen peroxide within the 2.0 × 10−7–1.0 × 10−4 mol L−1 concentration range (slope: (2.33 ± 0.02) × 10−2 A mol−1 L, r = 0.999). A detection limit of 6.9 × 10−8 mol L−1 was obtained together with a R.S.D. (n = 50) of 2.7% for a hydrogen peroxide concentration level of 5.0 × 10−5 mol L−1. The immobilization method showed a good reproducibility with a R.S.D. of 5.3% for five different electrodes. Moreover, the useful lifetime of one single biosensor was estimated in 13 days.
The SAM-based biosensor was applied for the determination of hydrogen peroxide in rainwater and in a hair dye. The results obtained were validated by comparison with those obtained with a spectrophotometric reference method. In addition, the recovery of hydrogen peroxide in sterilised milk was tested. 相似文献
A potential energy surface for the ground electronic state of the Ar-HI van der Waals complex is calculated at the coupled-cluster with single and double excitations and a noniterative perturbation treatment of triple excitations [CCSD(T)] level of theory. Calculations are performed using for the iodine atom a correlation consistent triple-zeta valence basis set in conjunction with large-core Stuttgart-Dresden-Bonn relativistic pseudopotential, whereas specific augmented correlation consistent basis sets are employed for the H and Ar atoms supplemented with an additional set of bond functions. In agreement with previous studies, the equilibrium structure is found to be linear Ar-I-H, with a well depth of 205.38 cm(-1). Another two secondary minima are also predicted at a linear and bent Ar-H-I configurations with well depths of 153.57 and 151.57 cm(-1), respectively. The parametrized CCSD(T) potential is used to calculate rovibrational bound states of Ar-HI/Ar-DI complexes, and the vibrationally averaged structures of the different isomers are determined. Spectroscopic constants are also computed from the CCSD(T) surface and their comparison with available experimental data demonstrates the quality of the present surface in the corresponding configuration regions. 相似文献
The gold(I) selenolate compound [Au(2)(SePh)(2)(mu-dppf)] (dppf = 1,1'-bis(diphenylphosphino)ferrocene) has been prepared by reaction of [Au(2)Cl(2)(mu-dppf)] with PhSeSiMe(3) in a molar ratio 1:2. This complex reacts with gold(I) or gold(III) derivatives to give polynuclear gold(I)-gold(I) or gold(I)-gold(III) complexes of the type [Au(4)(mu-SePh)(2)(PPh(3))(2)(mu-dppf)](OTf)(2), [Au(3)(C(6)F(5))(3)(mu-SePh)(2)(mu-dppf)], or [Au(4)(C(6)F(5))(6)(mu-SePh)(2)(mu-dppf)], with bridging selenolate ligands. The reaction of [Au(2)(SePh)(2)(mu-dppf)] with 1 equiv of AgOTf leads to the formation of the insoluble Ag(SePh) and the compound [Au(2)(mu-SePh)(mu-dppf)]OTf. The complexes [Au(4)(C(6)F(5))(6)(mu-SePh)(2)(mu-dppf)] and [Au(2)(mu-SePh)(mu-dppf)]OTf (two different solvates) have been characterized by X-ray diffraction studies and show the presence of weak gold(I)-gold(III) interactions in the former and intra- and intermolecular gold(I)-gold(I) inter-actions in the later. 相似文献
16-Membered azothia- and azoxythiacrown ethers have been studied as ion carriers in ion-selective membranes. Their selectivities towards alkali, alkaline earth, transition and heavy metal cations were evaluated. The complex formation constants for these compounds with chosen cations have been determined using segmented sandwich membranes method. 相似文献
An electrochemical method for identifying anthraquinone-type dyes in microsamples from works of art, based in the voltammetry of microparticles approach, is reported. Upon attachment onto graphite/polyester composite electrodes, natural pigments aloe, henna, cochineal red, madder lake, kermes, shellac, and alizarin and purpurin taken as reference materials can be identified from their square wave voltammetric profiles in MeCN (0.10 mol L(-1) Bu(4)NPF(6)) and aqueous (0.25 mol L(-1) acetic acid+0.25 mol L(-1) sodium acetate) electrolytes. 相似文献