The algorithm of substructure recognition in organic compounds by the artificial intelligence method on the basis of IR-spectra

An algorithm for identification of the IR-active substructures has been developed. In the algorithm, which recognizes about 100 substructures, the analysis is based on three parameters for a set of characteristic bands: position, intensity and arbitrarily chosen diagnostics. The algorithm provides two ways of identification: a. standard method, which compares an IR spectrum with the correlation tables contained in the algorithm, b. dynamic method advanced here which consists in that the recognized substructures cause blocking of their characteristic bands making them almost inaccessible for further analysis.     

Na-montmorillonite hydrates under ethane rich reservoirs: NPzzT and muPzzT simulations

Na-montmorillonite hydrates in presence of ethane molecules are studied by means of hybrid Monte Carlo simulations in the NP(zz)T and muP(zz)T ensembles. The NP(zz)T ensemble allows us to study the interlaminar distance as a function of water and ethane content. These data show clear plateaus for lower ethane contents and mainly for water contents consistent with the formation of a single water layer. In addition, from this ensemble the structure for some of these interlaminar compositions were analyzed. For systems containing few ethane molecules and water enough to complete a single layer, it was observed that ethane mainly situates close to the interlayer midplane and adopts a nearly parallel arrangement to the clay surface. On the other hand, the muP(zz)T ensemble allows us to determine the interlaminar distance and water-ethane content for any specific reservoir. Here, some important findings are the following: the partial exchange of water by ethane molecules that enhances for decreasing the water vapor pressure; the obtention of a practically constant interlaminar space distance as a function of the water vapor pressure; the conservation of ion solvation shells; the enhancement of the water-ethane exchange for burial conditions; and finally, the incapability for a dehydrated clay mineral to swell in a dry and rich ethane atmosphere.     

Temperature induced structural changes of Cu(II) and Ni(II) complexes and their thermal decomposition

The paper discusses the structural changes of some Cu(II) and Ni(II) complexes during the heating and their influence upon the decomposition stoichiometry. The influence of the interactions inside of coordination polyhedra, bonding and stereochemical properties of the counter ions or molecules are discussed in this connection as well. The expressive influence of the plasticity or rigidity of the Cu(II) and Ni(II) coordination polyhedra, respectively, is emphasized.

---

Zusammenfassung Es werden wÄrmebedingte StrukturverÄnderungen einiger Cu(II) bzw. Ni(II)-Komplexe sowie deren Einflu\ auf die Stöchiometrie der Zersetzung beschrieben. In diesem Zusammenhang wird auch ebenso der Einflu\ von Wechselwirkungen innerhalb des Koordinationspolyeders sowie von Bindungs- und stereochemischen Eigenschaften der Gegenionen oder -moleküle beleuchtet. Es wird der ausdrucksvolle Einflu\ der PlastizitÄt und HÄrte von Cu(II)- und Ni(II)-Koordinationspolyedern hervorgehoben.

     

Investigation on the chemistry of berbans—VII: Synthesis of 10,11-dimethoxy(depyrrolo)raunescine stereoisomers

Acyloxy-ketone rearrangement, proceeding by the action of base, has been observed in the case of ketone 2. By the reduction of ketones 2 and 3 with sodium boron hydride, new 10, 11-dimethoxy(depyrrolo)raunescine stereoisomers (5a–7a) have been prepared. Previously known alcohols with alloberban skeleton (12,13) have been similarly converted into tetracyclic raunescine stereoisomers (8a,9) by the oxido-reductive method. The stereochemistry of these compounds has been investigated by physical (¹H NMR, IR) and by chemical methods.     

Potentiometric studies of dithiooxamide with a sulphide-selective membrane electrode

The sulphide-selective electrode is applicable to the determination of dithiooxamide by titration with silver nitrate. The effect of the alkali content of the solutions on the reaction has been studied. The reaction products are silver sulphide, oxalic acid, and nitric acid. If the alkali concentration of the solution is lower than that equivalent to the acid formed during the titration, the amount of sulphide produced by hydrolysis decreases and the equilibrium potential is established more slowly.The determination is rapid and accurate in the presence of 1 M sodium hydroxide.     

Behavior and characteristics of biogenic amines, ornithine and lysine derivatized with the o-phthalaldehyde-ethanethiol-fluorenylmethyl chloroformate reagent

The stability and characteristics of the ornithine (Orn), lysine (Lys), putrescine (Put), cadaverine (Cad), 1,7-diaminoheptane (Diah), spermidine (Spd) and spermine (Spm) derivatives obtained with the o-phthalaldehyde (OPA)-ethanethiol (ET)-fluorenylmethyl chloroformate (FMOC) reagent has been investigated. The stoichiometry of the introduced, two-step derivatization process has been followed by photodiode array (DAD) and fluorescence (FL) detections, simultaneously, while the composition of derivatives was confirmed by on-line HPLC-electrospray ionization (ESI) MS measurements. Depending on the composition of the OPA reagents, in addition to the secondary amino group-containing Spd and Spm, under common aqueous conditions also Orn and Lys do react with FMOC resulting in derivatives of various compositions. Applying the OPA-ET reagent of increasing methanol (Met) content (38-80%, v/v) the formation of the FMOC group containing Orn and Lys derivatives could be considerably decreased. Optimum elution condition (18 min, including equilibration) was developed for the simultaneous quantitation of Orn, Lys, Put, Cad, Diah, Spd and Spm, in the presence of the rest of protein amino acids. The practical utility of the method was demonstrated by the analysis of mouse tissues. Average reproducibility of quantitations, characterized with the relative standard deviation percentages of fluorescence intensities and UV responses, in order of listing, proved to be 2.1% and 2.1%, respectively.     

Thermal and FTIR spectroscopic analysis of the interactions of aniline adsorbed on to MCM-41 mesoporous material

The adsorption of aniline on Na-AlMCM-41 synthesized by us has been characterized by infrared spectroscopy, temperature programmed desorption (TPD), and differential thermal analysis methods. Aniline would be mostly bound to the mesostructure through weak pi interactions. On the mesostructure containing adsorbed water, the co-adsorption of aniline could occur by weak hydrogen bonding through surface water molecules. For water, two possible modes of adsorption have been identified. Different associations between aniline and hydrated and nonhydrated mesostructures have been evaluated in order to favor the posterior in situ polymerization of adsorbed aniline.     

Prediction of chromatographic parameters for some anilines by molecular connectivity

Summary The possible relation existing between R_F values obtained by thin-layer chromatography for a group of anilines with connectivity indices proposed by Kier and Hall has been studied. Using multivariable regression the corresponding connectivity functions, selected for their respective correlation coefficients, standard deviations, Snedecor's F and Student's t were obtained. Regression analysis of the connectivity functions gives a correct prediction of the experimental elution sequence for this group of substances on silica gel stationary phases and various mobile phases of different polarity. The corresponding random and stability studies of the different prediction models selected were carried out, showing good stability and null randomness in all cases.     

Thermochemical properties of benzoic acid derivatives VIII. Enthalpies of combustion and formation of o-, m-, and p- t-butylbenzoic acids

The enthalpies of formation in the crystalline state at 298.15 K of o-, m-, and p-t-butyl-benzoic acids have been determined by static-bomb calorimetry. Vapour-pressure determinations were made by the Knudsen-effusion technique and the sublimation enthalpies at the mean temperatures of the measurement ranges have been derived for the three acids. The values obtained are:

     

60.

Gravimetrische Halogenbestimmung in organischen Verbindungen nach dem Hydrierverfahren     

Mlinkó  S. 《Mikrochimica acta》1961,49(6):854-859

Zusammenfassung Es wurde eine gravimetrische Halogenbestimmung zur Analyse organischer Substanzen ausgearbeitet. Die Pyrolyse und Hydrierung wird in ammoniakhaltigem Wasserstoffstrom ausgeführt, die gebildeten Ammoniumhalogenide werden in einem nach dem Hydrierrohr geschalteten Absorptionsrohr gesammelt. Die Analyse läßt sich durch Wägung des Absorptionsrohres ausführen. Gleichzeitige Gegenwart von Schwefel stört die Analyse nicht.

---

Summary A gravimetric method has been worked out for determining the halogens in organic materials. The pyrolysis and hydrogenation are conducted in a current of hydrogen containing ammonia, and the ammonium halides formed are collected in an absorption tube attached to the hydrogenation tube. The analysis can be done by weighing the absorption tube. The presence of sulfur does not interfere with the analysis.

---

Résumé On a élaboré un dosage gravimétrique des halogènes dans l'analyse des substances organiques. On réalise la pyrolyse et l'hydrogénation dans un courant d'hydrogène contenant de l'ammoniac et l'on recueille les halogénures d'ammonium formés dans un tube à absorption disposé après le tube à hydrogénation. On peut effectuer l'analyse en pesant le tube à absorption. La présence simultanée du soufre ne gêne pas l'analyse.

     

[首页] « 上一页 [1] [2] [3] [4] [5] 6 [7] [8] [9] [10] [11] 下一页 » 末  页»

	$\text{ΔH}{}_{\mathrm{f}}{}^{\mathrm{o}}\text{(c, 298.15 K)/kJ mol}{}^{\mathrm{?1}}$	$\text{ΔH}{}_{\mathrm{s}}\text{/kJ mol}{}^{\mathrm{?1}}$
o-t-butylbenzoic acid	476.2 ± 1.9	99.8 ± 0.4	(at 314.6 K)
m-t-butylbenzoic acid	504.3 ± 1.6	103.0 ± 0.5	(at 326.5 K)
p-t-butylbenzoic acid	502.9 ± 1.7	103.8 ± 0.4	(at 334.1 K)

Gravimetrische Halogenbestimmung in organischen Verbindungen nach dem Hydrierverfahren

Zusammenfassung Es wurde eine gravimetrische Halogenbestimmung zur Analyse organischer Substanzen ausgearbeitet. Die Pyrolyse und Hydrierung wird in ammoniakhaltigem Wasserstoffstrom ausgeführt, die gebildeten Ammoniumhalogenide werden in einem nach dem Hydrierrohr geschalteten Absorptionsrohr gesammelt. Die Analyse läßt sich durch Wägung des Absorptionsrohres ausführen. Gleichzeitige Gegenwart von Schwefel stört die Analyse nicht.

---

Summary A gravimetric method has been worked out for determining the halogens in organic materials. The pyrolysis and hydrogenation are conducted in a current of hydrogen containing ammonia, and the ammonium halides formed are collected in an absorption tube attached to the hydrogenation tube. The analysis can be done by weighing the absorption tube. The presence of sulfur does not interfere with the analysis.

---

Résumé On a élaboré un dosage gravimétrique des halogènes dans l'analyse des substances organiques. On réalise la pyrolyse et l'hydrogénation dans un courant d'hydrogène contenant de l'ammoniac et l'on recueille les halogénures d'ammonium formés dans un tube à absorption disposé après le tube à hydrogénation. On peut effectuer l'analyse en pesant le tube à absorption. La présence simultanée du soufre ne gêne pas l'analyse.