Highly Selective Salicylate Membrane Electrode Based on N,N＇- （Aminoethyl）ethylenediamide Bis（2-salicylideneimine） Binuclear Copper（Ⅱ） Complex as Neutral Carrier

A new ion selective electrode for salicylate based on N,N＇-（aminoethyl）ethylenediamide bis（2-salicylideneimine） binuclear copper（Ⅱ） complex [Cu（Ⅱ）2-AEBS] as an ionophore was developed. The electrode has a linear range from 1.0 × 10^-1 to 5.0 ×10^-7 mol·L^- 1 with a near-Nemstian slope of （ - 55 ±1 ） mV/decade and a detection limit of 2.0 × 10-7 mol·L^-1 in phosphorate buffer solution of pH 5.0 at 25 ℃. It shows good selectivity for Sal^- and displays anti-Hofmeister selectivity sequence： Sal^-〉SCN^-〉 ClO4^- 〉I^-〉 NO2^- 〉Br^-〉 NO3^- 〉Cl^-〉 SO3^2- 〉 SO4^2- The proposed sensor based on binuclear copper（Ⅱ）complex has a fast response time of 5-10 s and can be used for at least 2 months without any major deviation. The response mechanism is discussed in view of the alternating current （AC） impedance technique and the UV-vis spectroscopy technique. The effect of the electrode membrane compositions and the experimental conditions were studied. The electrode has been successfully used for the determination of salicylate ion in drug pharmaceutical preparations.     

An Efficient Route to Prepare Metal Organosols by Phase Transfer Procedure

Silver and gold organosols are easily prepared by transferring nanoparticles from aqueous phase into isooctane with high efficiency (＞90%). Concentrations of sodium oleate and magnesium chloride have crucial effects on the transfer efficiency. Based on the UV-visible absorption spectra, TEM micrographs of nanoparticles, as well as molecular modeling calculation about the adsorption conformation of sodium oleate molecules, a possible phase transfer mechanism is proposed.     

A New Amperometric Glucose Biosensor with Naphthol Green B as Mediator

Naphthol green B was used, for the first time, as a new mediator in an amperometric glucose biosensor. It is a good mediator, promoting electron transfer from glucose oxidase to graphite electrode. The biosensor shows high sensitivity to glucose at low potential with response time of 30 seconds. The linear range is from 1.5 to 18μmol/L glucose with detection limit of 0.5μmol/L glucose.     

Nanorods of Various Oxides and Hierarchically Structured Mesoporous Silica by Sol-Gel Electrophoresis

In this paper, we report the template-based growth of nanorods of oxides and hierarchically structured mesoporous silica, formed by means of a combination of sol-gel processing and electrophoretic deposition. Both single metal oxides (TiO₂) and complex oxides (Pb(Zr_0.52Ti_0.48)O₃) have been grown by this method. This method has also been applied to the growth of nanorods of mesoporous silica having an ordered pore structure, where the pores are aligned parallel to the long axis of the nanorod. Uniformly sized nanorods of about 125–200 nm in diameter and 10 m in length were grown over large areas with near unidirectional alignment. Appropriate sol preparation yielded the desired stoichiometric chemical composition and crystal structure of the oxide nanorods, with a heat treatment (500–700°C for 15–30 min) for crystallization, densification and any necessary pyrolysis.     

3-(4-氯苯基)-6-取代苯氧乙酰氨基均三唑并[3,4-b]-1,3,4-噻二唑类化合物的合成

将取代苯氧乙酰氨基引入到3,6-二取代均三唑并噻二唑的分子骨架中, 设计合成了8个未见文献报道的3-(4-氯苯基)-6-取代苯氧乙酰氨基均三唑并[3,4-b]-1,3,4-噻二唑类化合物5a～5h, 结构经元素分析、IR和¹H NMR等测试得到确证.     

还原气化-原子荧光光谱法快速测定绿色食品基地土壤中的砷与汞

应用还原气化-原子荧光光谱法，使待测元素与基体自动分离、富集，测定绿色食品基地土壤中的AS、HG。经对国家经土壤标准物质进行分析证明，该方法具有快速、准确、灵敏度高等优点，用于绿色食品基地的审评检测，结果令人满意。     

Trends of Atmospheric CCl 3 F,CCl 2 F 2 and CCl 2 FCClF 2 in Shanghai (China)

Atmospheric concentrations of CCl 3 F (CFC-11), CCl 2 F 2 (CFC-12), and CCl 2 FCClF 2 (CFC-113) in troposphere in Shanghai, China (31°1N) have been routinely monitored by using gas chromatography with electron capture detector from November 1997 to December 2000. The observation shows that there is a slowly declining trend of the three compounds. On the other hand, a comparison has been drawn between the concentrations observed and the ones calculated by 2-box model on the basis of the global statistical data of CFCs production and emission. Our observation agrees with the calculations. It shows that production and emission of chlorofluorocarbons (CFCs) in China are still at a low level and gradually decreasing.     

多集值信息表中的多粒度模糊决策论粗糙集

多粒度粗糙集和决策论粗糙集是Pawlak粗糙集的重要推广,目前已成为人工智能研究的热点.然而,它们大多处理的都是单值信息系统中的问题.而实际生活中绝大多数都是处理多值问题,为了解决这一问题,在多集值信息表中将多粒粗糙集与模糊决策论粗糙集相结合进行研究,提出了其在乐观,悲观情形下的上下近似,研究了一些相关性质并给出了多集值信息表中的多粒度模糊决策论粗糙集精度、粗度的概念,最后通过一个具体例子验证其有效性.     

多孔活性自燃金属的光谱辐射特性研究

多孔活性金属材料因为内部存在大量的孔隙，大大地增加了与空气的接触面积，使得其在空气中的燃烧较为猛烈，燃烧温度迅速上升。其燃烧过程属于固体燃烧的范畴，较为复杂。以镁为例，通过建立燃烧模型，来研究多孔活性金属的光谱辐射特性。首先，建立氧气总消耗量与活性金属剩余质量的关系，研究氧气在活性金属孔隙内的扩散浓度关系，通过求解活性金属热平衡方程得到活性金属燃烧过程中温度与时间的关系式，进而得到活性金属的峰值光谱辐射强度表达式；然后，将模型计算的仿真结果与红外热像仪测得的实验结果对比，结果表明，模型的计算结果与实验结果相一致，误差在了10%以内；最后，通过建立的燃烧模型来研究活性金属燃烧规律以及其光谱辐射特性，解决了高空、高速下的活性金属光谱辐射强度难以实验获得的问题，大大减小了实验成本与时间。分别对比不同时间活性金属箔片在1～3，3～5以及8～12 μm波段下的辐射强度，得出活性金属燃烧时的辐射强度主要集中在3～5 μm波段的结论。研究结果表明：自燃金属最大燃烧温度随高度的增加逐渐下降，随气流速度的增加先增加后减小，在速度为30 m·s-1时，温度达到最大；自燃金属的光谱辐射强度在2～6 μm波段达到最大。该模型也可以用来研究其他活性金属的燃烧特性。     

聚乙烯吡咯烷酮纳米银荧光增强测定番茄红素

合成了聚乙烯吡咯烷酮纳米银,研究了番茄红素对聚乙烯吡咯烷酮纳米银体系的荧光增强效应。考察了缓冲体系、纳米银用量、聚乙二醇浓度、反应时间和温度等因素的影响,建立了测定番茄红素的新方法。在最佳条件下,体系的相对荧光强度与番茄红素浓度呈良好的线性关系,其线性范围为2.0×10-6~8.0×10-5 mol/L,检出限为1.6×10-8 mol/L。方法应用于实际样品检测,回收率为98.29%~109.36%。