A Sufficient Condition for Interolation by Functions in A~P(φ) (1

肖杰  赵大蕻 《数学季刊》1992,(4)

Melt rheology of polylactide/montmorillonite nanocomposites

In this article, the linear and nonlinear shear rheological behaviors of polylactide (PLA)/clay (organophilic‐montmorillonite) nanocomposites (PLACNs) were investigated by an Advanced Rheology Expanded System rheometer. The nanocomposites were prepared by master batch method using a twin‐screw extruder with poly(ε‐caprolactone) (PCL) as a compatibilizer. The presence of org‐MMT leads to obvious pseudo‐solid‐like behaviors of nanocomposite melts. The behaviors caused by the formation of a “percolating network” derived from the reciprocity among the strong related sheet particles. Therefore, the storage moduli, loss moduli, and dynamic viscosities of PLACNs show a monotonic increase with MMT content. Nonterminal behaviors exists in PLACNs nanocomposites. Besides the PLACNs melts show a greater shear thinning tendency than pure PLA melt because of the preferential orientation of the MMT layers. Therefore, PLACNs have higher moduli but better processibility compared with pure PLA. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3189–3196, 2007     

求解非对称线性方程组的QMRGCGS方法

1 引言 求解非对称线性方程组Ax=b的双共轭梯度方法(BCG)[3]和它的变形共轭梯度平方方法(CGS)[6]都有典型的不规则收敛行为,后来Freund和Nachtigal提出一种BCG类方法,即拟极小剩余方法(QMR)[7],用来补救BCG方法的收敛性并且产生了光滑的收敛曲线。然而,象BCG方法一样,QMR方法要用到系数矩阵A及其转置A~T与向量的乘积,为了解决这一问题,Freund提出TFQMR方法,此方法具有拟极小剩余性,同时不需用到A~T与向量的乘积。     

逻辑函数最大项展开式和CRM展开式的转换

在逻辑函数的CRM展开式和两种新运算基础上，对函数量大项展开系数和CRM展开系统(dj系数)之间的关系作了较详细的讨论，并提出了两者的矩阵转换法，快速转换法和直接代入转换法，具备较好的实用性．     

微尺度效应对螺旋槽干气密封性能的影响

本文引用考虑微尺度效应的雷诺方程,推导出了考虑微尺度效应的螺旋槽干气密封内部流动的近似算法。应用本文提供的算法对文献中干气密封的不同实验工况进行了计算,与相应的实验数据对比,计算结果和实验结果基本符合;切向动量调节系数σv对计算结果在尺度越小时影响越大;考虑微尺度效应时开启力的计算结果更趋于实验数据。     

瑶药野葛花中6种无机元素的测定

用原子吸收光谱法测定野葛花原生药、野葛花汤剂中的 Ca、Mg、Cu、Zn、Fe、Mn等 6种无机元素含量。结果表明 ,原药和水煎液中 Ca、Mg含量比较丰富 ;各种元素的煎出率存在着较大的差异 ,其中 Cu、Zn、Fe的煎出率较高 ,Zn最高 ,达到了 82 .5 6 % ;Ca最低 ,为 5 .5 8%。并且将其结果与葛根的无机元素做了比较。为探讨无机元素与中药药效之间的关系提供了基础数据。     

Stationary Intensity Distribution of Single-Mode Laser Driven by Additive and Multiplicative Colored Noises with Colored Cross-Correlation

Applying the approximate Fokker-Planck equation we derived, we obtain the analytic expression of thestationary laser intensity distribution Pst(Ⅰ) by studying the single-mode laser cubic model subject to colored cross-correlation additive and multiplicative noise, each of which is colored. Based on it, we discuss the effects on the stationarylaser intensity distribution Pst(Ⅰ) by cross-correlation between noises and “color“ of noises (non-Markovian effect) whenthe laser system is above the threshold. In detail, we analyze two cases: One is that the three correlation-times (i.e.the self-correlation and cross-correlation times of the additive and multiplicative noise) are chosen to be the same value(τ1 = τ2 = τ3 = τ). For this case, the effect of noise cross-correlation is investigated emphatically, and we detect thatonly when λ≠ 0 can the noise-induced transition occur in the Pst(Ⅰ) curve, and only when τ≠ 0 and λ≠ 0, can the“reentrant noise-induced transition“ occur. The other case is that the three correlation times are not the same value,τ1 ≠τ2 ≠τ3. For this case, we find that the noise-induced transition occurring in the Pst (Ⅰ) curve is entirely differentwhen the values of τ1, τ2, and τ3 are changed respectively. In particular, when τ2 (self-correlation time of additivenoise) is changing, the ratio of the two maximums of the Pst(Ⅰ) curve R exhibits an interesting phenomenon, “reentrantnoise-induced transition“, which demonstrates the effect of noise “color“ (non-Markovian effect).     

火力发电厂废水中悬浮物处理的影响因素探讨

对火力发电厂废水中悬浮物处理的影响因素如pH值、水温、接触介质、进水水质、混凝剂加入量等进行分析，对主要影响因素水温和混凝剂加入量进行了试验分析，制定出废水悬浮物处理的合理方案。     

一个素变数丢番图不等式

本文证明了如果1相似文献