Synthesis and characterization of thermally crosslinkable hole‐transporting polymers for PLEDs

Two new thermally crosslinkable hole‐transporting polymers, X‐PTPA and X‐PCz, were synthesized via Yamamoto coupling reactions. The number‐averaged molecular weights (M_n) of X‐PTPA and X‐PCz were found to be 45,000 and 48,000, respectively, and therewith, polydispersity indices were of 1.8 and 1.7, respectively. Thermally crosslinked X‐PTPA and X‐PCz exhibit excellent solvent resistance and stable optoelectronic properties. The UV–visible maximum absorption peaks of X‐PTPA and X‐PCz in the thin film state are at 389 and 322 nm, respectively. The HOMO levels of X‐PTPA and X‐PCz are estimated to be ?5.27 and ?5.39 eV, respectively. Multilayered devices (ITO/crosslinked X‐PTPA or X‐PCz/SY‐PPV/LiF/Al) were fabricated with SY (SuperYellow) as the emitting layer. The maximum efficiency of the multilayered device with a crosslinked X‐PTPA layer is approximately three times higher than that of the device without a crosslinked X‐PTPA layer and much higher than that of the crosslinked X‐PCz device. This result can be explained by the observations that crosslinked X‐PTPA produces increased electron accumulation within the emitter, SY, and also efficient exciton formation due to improved charge balance. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5111–5117     

Curing temperature- and concentration-dependent dielectric properties of cross-linked poly-4-vinylphenol (PVP)

In this paper, dielectric properties of various thick PVP films cured at temperatures between 125° C and 200 °C are investigated. The thicknesses of PVP films are adjusted by varying their concentration in PGMEA solvent from 10 wt% to 2.5 wt%. Through FT-IR, C–V, SEM, and AFM analyses, the optimum curing process temperatures (150 °C for 10 wt% and 7.5 wt% samples, and 175 °C for 5 wt% samples) where PET substrates can be thermally endured are proposed in terms of their low hysteresis voltage in the C–V curve (1–2 V in 10 wt% samples, below 1 V in 7.5 wt% samples, and 0.5 V in 5 wt% samples).     

Optical and acoustic study of nucleation and growth of bubbles at a liquid-solid interface induced by nanosecond-pulsed-laser heating

The dynamics of liquid-vapor phase-change in the nanosecond time-scale induced by pulsed-laser heating of a liquid on a solid sample is studied by means of optical reflectance and scattering measurements, and the piezoelectric detection technique. The liquids studied include water, ethanol, methanol, IsoproPropyl Alcohol (IPA), and mixtures of water and IPA. The threshold fluence for nucleation is determined with high accuracy using the optical and acoustic signals. Heat diffusion calculations performed for the threshold fluences indicate that the liquids are sufficiently superheated before nucleation sets on. The transient optical reflectance signal is analyzed by an effective-medium theory to provide bubble-growth kinetics, so that the bubble-growth velocity for the test liquids could be estimated. In addition, it is observed that, following the thermally induced nucleation, repetitive acoustic cavitation at the surface of the solid sample occurs, with a time interval related to the speed of sound in the liquid.