Elimination of SAS Interferences in Catalytic Adsorptive Stripping Voltammetric Determination of Cr(VI) by Means of Fumed Silica

In the work the procedure of chromium(VI) determination by catalytic adsorptive stripping voltammetry (CAdSV) with application of fumed silica, is presented. Two variants of the method are proposed: in the first fumed silica is put directly to the electrolytic cell containing tested solution, in the second the silica is shaken with the sample and next centrifuged. The effectiveness of many surface‐active substances removal from synthetic solutions as well as natural water samples, is studied. In the experiments the fumed silica (Sigma‐Aldrich) of the specific surface area in the range 200–390 m² g^?1 was used. Two types of the working electrodes were applied, i.e., hanging mercury drop electrode (HMDE) and cyclic renewable mercury film electrode (Hg(Ag)FE). In the silica presence i) the relative standard deviation (RSD) for 0.1 μg L^?1 Cr(VI) is <2% (HMDE) and <5% (Hg(Ag)FE), n=7, ii) the detection limits estimated deposition time 20 s were respectively 14 ng L^?1 (HMDE) and 22 ng L^?1 (Hg(Ag)FE). The accuracy of the method was tested by studying the recovery of Cr(VI) from spiked natural water samples.     

Electron collisions with trifluorides: BF3 and PF3 molecules

Absolute total cross sections (TCSs) for electron scattering from boron trifluoride (BF(3)) and phosphorus trifluoride (PF(3)) molecules have been measured using a linear transmission method. The electron energy ranges from 0.6 to 370 eV for BF(3) and from 0.5 to 370 eV for PF(3). The TCS energy dependence for BF(3) exhibits two very pronounced enhancements: resonantlike narrow feature located near 3.6 eV with the maximum value of 19.2 x 10(-20) m(2), and intermediate energy very broad enhancement with two humps, one centered around 21 eV (18.8 x 10(-20) m(2) in the maximum) and the other near 45 eV (19.5 x 10(-20) m(2)). For PF(3) the TCS has quite different low-energy dependence: at 0.5 eV it has a high value of 70 x 10(-20) m(2) and decreases steeply towards higher energies. Beyond the minimum near 5.5 eV, the TCS reveals two distinct humps: the resonant one centered near 11 eV with the peak value of 32.9 x 10(-20) m(2) and the second one much broader around 35 eV (27.9 x 10(-20) m(2)). The present TCSs for trifluorides are compared to each other as well as to previous TCS data for selected perfluorides and to results for their perhydrided counterparts. The differences and similarities in the shape and magnitude of TCSs are pointed out.     

The first example of Diels-Alder cycloaddition of ortho-xylylenes to meso-tetraarylporphyrins containing electron-deficient β,β-double bonds

β-Nitro-5,10,15,20-tetraphenylporphyrin and its zinc complex, or 2,7-dinitro-5,10,15,20-tetraphenylporphyrin, react with 1,3-dihydrobenzo[c]thiophene 2,2-dioxide in refluxing 1,2,4-trichlorobenzene, giving rise to chlorins, bacteriochlorins or isobacteriochlorins. The products obtained are attractive intermediates for further functionalization of porphyrins and may be of potential use as sensitizers in photodynamic therapy.     

Cauchy boundary andb-incompleteness of space-time

It is shown that if a space-time (M, g) is time-orientable and its Levi-Civita connection [in the bundle of orthonormal frames over (M, g)] is reducible to anO(3) structure, one can naturally select a nonvanishing timelike vector field and a Riemann metricg ⁺ onM. The Cauchy boundary of the Riemann space (M, g ⁺) consists of endpoints ofb-incomplete curves in (M, g); we call it theCauchy singular boundary. We use the space-time of a cosmic string with a conic singularity to test our method. The Cauchy singular boundary of this space-time is explicitly constructed. It turns out to consist of what should be expected.     

Blaschke-Süss type theorems for closed plane curves

A C¹-class of plane closed curves is considered, which contains all ovals and rosettes. This class is divided into some subclasses for which greatest lower bounds of numbers of antipodal and arc-antipodal sets are determined.     

Adams methods for neutral functional differential equations

Summary In this paper Adams type methods for the special case of neutral functional differential equations are examined. It is shown thatk-step methods maintain orderk+1 for sufficiently small step size in a sufficiently smooth situation. However, when these methods are applied to an equation with a non-smooth solution the order of convergence is only one. Some computational considerations are given and numerical experiments are presented.     

Kinetics and mechanism of a trans-tetraazamacrocyclic chromium(III) complex oxidation by hexacyanoferrate(III) in strongly alkaline media

Oxidation of the trans-[Cr(cyca)(OH)₂]⁺ complex, where cyca = meso-5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane, by [Fe(CN)₆ ]^3- ion in strongly alkaline media, leading to [Cr^V O(cyca_ox )]³⁺ ion, has been studied using electronic and e.p.r. spectroscopy. The kinetics of the Cr^III → Cr^IV transformation have been studied using a large excess of the reductant and OH^- ion over the oxidant. The reaction is a second order process: first order in [Cr^III] and [Fe^III] at constant [OH^-]. The second order rate constant is higher than linearly dependent on the OH^- concentration. The mechanism of the reaction has been discussed. A relatively inert intermediate chromium(V) species was detected based on characteristic bands in the visible region and the e.p.r. signal at g_iso = 1.987 for the systems where an excess of oxidant was used. The hyperfine structure of the main e.p.r. signal is consistent with the d¹ -electron interactions with four equivalent nitrogen nuclei and [Cr^V = O(cyca_ox)]³⁺ formula, where cyca_ox = oxidized cyca, can be postulated for the intermediate Cr^V complex.     

Sensitive spectrophotometric determination of gallium with bromopyrogallol red in the presence of surfactants

Gallium in the presence of surfactants (NTGE and CTA) forms with BPR a violet ternary complexes with λ_max at 615 and 625 nm, respectively, with molar absorptivities of 7.0 × 10⁴ and 1.3 × 10⁵ liters mol^?1 cm^?1. These complexes can be advantageously used for the determination of gallium. The molar ratio of gallium to BPR, which is 1:1 in the binary complex, increases to 1:3 in the ternary complex. The presence of surfactants changes the number of BPR molecules bonded to gallium. This is the main factor in the increase in color intensity. Numerous metals interfere. Gallium can be separated by extraction of gallium from 7 M hydrochloric acid with diisopropyl ether.     

The first compound with an unusual type of anion, [Li(SR)2]–: bis­(μ2‐aqua‐d2)tetra­kis(aqua‐d2)dilithium(I) bis­[bis­(tri‐tert‐butoxy­silanethiol­ato‐κ2O,S)lithate(I)] dihydrate‐d2

The title complex, [Li₂(D₂O)₆][Li(C₉H₂₇SSiO₃)₂]₂·2D₂O, is the first compound with an S—M bond (M = alkali metal) within an unusual type of lithate anion, [Li(SR)₂]⁻ {where R is Si[OC(CH₃)₃]₃}. There is a centre of symmetry located in the middle of the Li₂O₂ ring of the cation. All Li atoms are four‐coordinate, with LiO₄ (cations) and LiO₂S₂ (anions) cores. The singly charged [Li(SR)₂]⁻ anions are well separated from the doubly charged [Li₂(D₂O)₆]²⁺ cations; the distance between Li atoms from differently charged ions is greater than 5 Å. Both ion types are held within an extended network of O—D⋯O and O—D⋯S hydrogen bonds.     

Multilayer adsorption of alcohols from benzene/n-heptane mixtures on silica gel

An equation for multilayer adsorption from multicomponent liquid mixtures on solid surfaces¹ has been examined. For this purpose experimental adsorption data for four alcohols from benzene/n-heptane mixture on silica gel have been measured. Average number of the adsorbed layers, heterogeneity parameter and capacity of the surface phase have been evaluated by using the equation mentioned above.

---

Mehrschichten-Adsorption von Alkoholen aus Benzol/n-Heptan-Mischung an Silica Gel

Zusammenfassung Eine Gleichung für Mehrschichten-Adsorption an festen Oberflächen¹ aus Mehrkomponentenlösungen wurde getestet. Zu diesem Zweck wurden experimentelle Daten für die Adsorption von vier Alkoholen aus Benzol/n-Heptan-Mischung an Silica Gel herangezogen. Der Mittelwert für die Anzahl der Adsorptionsschichten, der Heterogenitätsparameter und die Kapazität der Oberflächenphase wurde aus dieser Gleichung berechnet.