Quantitative Determination of Oxalic Acid Using Victoria Blue B Based on a Catalytic Kinetic Spectrophotometric Method

A sensitive catalytic method is developed for the spectrophotometric determination of oxalic acid. The procedure is based on the effect of oxalate on the oxidation of Victoria blue B by dichromate in dilute sulfuric acid medium. The reaction is quantitatively estimated by measuring the decrease in absorbance of Victoria blue B at the maximum wavelength of 610nm after quenching the reaction with tap water. The factors effecting the sensitivity and reproducibility of the reaction were studied. The method is not interfered with by foreign species generally associated with oxalate and oxalic acid. The described method is simple, specific, inexpensive and suitable for oxalic acid concentrations of between 0.06 and 9.0µgmL^–1. It was validated with satisfactory results by determining oxalic acid content in water extracts from plant materials such as spinach and Lathyrus sativus.     

磷酰氨基酸的酯交换反应研究

本文利用^3^1P NMR , 对比研究了磷酰化组氨酸与其它磷酰化氨基酸和一级醇的磷上酯交换的反应速度,实验表明磷酰化组氨酸的反应速度最快. 由此提出了以下机理:由于咪唑环的参与,磷可以形成六配位过渡态,从而加快了反应速度.     

脱乙酰壳多糖化学修饰电极测定铂的研究

用脱乙酰壳多糖修饰电极为工作电极，阳极溶出伏安法测定痕量铂。在ｐＨ＝２￣３的ＫＣｌ－ＨＣｌ底液中，－０．３Ｖ富集２ｍｉｎ，静止１５ｓ，以０．２Ｖ／ｓ扫速阳极溶出，峰电位在－０．１６Ｖ（ｖｓ．ＳＣＥ），铂（Ⅳ）离子浓度在０．５￣５．０μｇ／ｍＬ范围内与峰高呈线性关系。富集１０ｍｉｎ后，可检测０．０２５μｇ／ｍＬ铂（Ⅳ）。该法用于贵金属矿样的测定，无需分离，结果满意。用循环伏安法、紫外光谱和拉曼光谱研     

HEMA-NVP-St三元共聚体系研究Ⅲ.均化剂对共聚物组成均一性的影响

用溴化钾-溴酸钾滴定法测定双键含量,元素分析法测定共聚物组成。讨论了HEMA-NVP-St三元共聚体系在不同反应程度时共聚物组成的变化,以及在此三元共聚体系中引入均化剂后,少量均化剂对共聚体系组成均一性的影响。发现在HEMA-NVP-St三元共聚体系中加入均化剂,对共聚反应的反应动力学影响不大,但对共聚物的组成均一性有较大影响。它的加入使三元共聚物中的链节比分布(即不同反应程度时,产物的累积平均组成)向较均一的方向发展。结合红外光谱、电子显微镜等实验证据,从微观结构上探讨了约化剂的作用。阐明均化剂改善了反应体系的相容性,从而得到组成分布较为均一的共聚产物。     

固相萃取-气相色谱-高分辨质谱法测定巢湖水中半挥发性有机化合物

描述了巢湖水中半挥发性有机化合物的提取、测定过程和初步结果。湖水中半挥发性有机化合物的提取采用XAD-2和XAD-4混合树脂富集，用气相色谱-高分辨质谱法测定了所萃取的有机化合物，并给出相应的分子式和结构式。春季湖水中检测到14种有机化合物。     

GC/MS法分析油松节挥发油化学成分

用气相色谱-质谱法对山东昆嵛山产油松节挥发油进行化学成分的分析。采用水蒸气蒸馏法从油松节中提取挥发油。采用不同类型的毛细管柱进行分析，找出最佳分析条件，用归一化法测定其含量，并用气相色谱-质谱法对化学成分进行鉴定。共鉴定了48个成分，占挥发油总成分的84％以上。结果表明，此方法稳定可靠，重现性好，适用于中药挥发油的化学成分分析。     

Preparation and Photocatalytic Characterization of Nanoporous TiO2

Nanoporous TiO2 photocatalysts were prepared by use of controlled drying method with surfactants. The surface area and porous properties are dependent on the chain length of incorporated surfactant cation. The TiO2 materials prepared in the presence of surfactant molecules during the gel formation exhibit much higher photocatalytic activity than that prepared in the absence of surfactants.     

Molecular structure of glucopyranosylamide lipid and nanotube morphology

A series of glucopyranosylamide lipids, N-(X-octadecenoyl)-beta-D-glucopyranosylamine [X = 13-cis (1), 11-cis (2), 9-cis (3), 6-cis (4), and 9-cis,12-cis (5)] and their saturated homologue N-octadecanoyl-beta-d-glucopyranosylamine (6), which differ in the position of a cis double bond in the C18 hydrocarbon chains, have been synthesized. The effect of the cis double bond position on the chiral self-assembly of each glycolipid has been examined by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, UV, and circular dichroism (CD). The 11-cis derivative 2 was observed to self-assemble in water to form a uniform hollow cylinder structure with about 200-nm outer diameters in >98% yields. The obtained nanotubes from 2 showed the narrowest distribution of outer diameters and also gave a negative CD band around 234-236 nm, showing the largest CD intensity among the glycolipids investigated. Thus, we found that the position of a cis double bond significantly influences the homogeneity of the outer diameters as well as growth behavior of the self-assembled nanotube structures. Chiral molecular packing driven by a possible bending structure of the unsaturated glycolipids is playing a critical role in determining tubular morphology through molecular self-assembly.     

纳米荧光小球标记在蛋白质微阵列检测中的应用研究

研究了不经分离、一次性制备氨基化联吡啶钌掺杂的双层二氧化硅纳米小球的方法。实验证明该纳米小球尺寸均匀,光稳定性、水溶性好,分散稳定。通过简单的偶联反应后,它能有效的和蛋白质结合,结合后的蛋白能保持其生物活性。以此纳米荧光小球为标记物,应用于蛋白质微阵列的定量检测,结果发现其效果明显优于相同条件下以异硫氰酸荧光素(FITC)为标记物的定量结果,检出限可以达到3.5 mg/L。     

煤焦在燃烧过程中孔隙结构变化的模拟

煤焦在燃烧过程中的物理特性，如比表面积和孔径分布会发生连续变化，直接测量煤焦在燃烧过程中的孔隙结构变化很困难，但可以通过合适的数学模型来观察，二维的圆柱孔模型已大量用来对煤焦气化与燃烧过程中表面积和孔隙结构的变化进行模拟，这个模型把孔隙分成两大部分－－大孔与小孔，因为小孔构成比表面的绝大部分，所以在反应过程中比表面积的变化可以由单一小孔模型来拟合，本文采用了用Ｔｓｅｎｇ和Ｅｄｇａｒ提出的孔模型对几