A practical approach to high performance capillary electrophoresis with biosynthetic human growth hormone as a model protein

Biosynthetic human Growth Hormone (B-hGH) is a protein comprising 191 amino acids. The molecular weight is 22,125 and the isoelectric point is close to pH 5. Due to the ready availability of closely related analogues B-hGH was used as a model protein thus allowing for the demonstration and evaluation of the high resolution capability of high performance capillary electrophoresis (HPCE). The same apparatus was used throughout the experiments and an optimum signal-to-noise ratio was found at 200 nm. Linearity was observed between peak area, retention time and the hGH concentration or sample introduction time. Baseline separation of hGH, desamido hGH and didesamido hGH was obtained. Examples showing analysis with 1 million theoretical plates per meter, high speed separation, simultaneous analysis of multiple samples, sample stacking, hGH tryptic digest, and hGH lysate are reported. The use of electrophoretic velocities instead of apparent velocities for peak identification is illustrated.     

Evaluations of solid electrodes for use in voltammetric monitoring of heavy metals in samples from metallurgical nickel industry

Evaluation of different solid electrode systems for detection of zinc, lead, cobalt, and nickel in process water from metallurgical nickel industry with use of differential pulse stripping voltammetry has been performed. Zinc was detected by differential pulse anodic stripping voltammetry (DPASV) on a dental amalgam electrode as intermetallic Ni–Zn compound after dilution in ammonium buffer solution. The intermetallic compound was observed at –375 mV, and a linear response was found in the range 0.2–1.2 mg L^–1 (r²=0.98) for 60 s deposition time. Simultaneous detection of nickel and cobalt in the low g L^–1 range was successfully performed by use of adsorptive cathodic stripping voltammetry (AdCSV) of dimethylglyoxime complexes on a silver–bismuth alloy electrode, and a good correlation was found with corresponding AAS results (r²=0.999 for nickel and 0.965 for cobalt). Analyses of lead in the g L^–1 range in nickel-plating solution were performed with good sensitivity and stability by DPASV, using a working electrode of silver together with a glassy carbon counter electrode in samples diluted 1:3 with distilled water and acidified with H₂SO₄ to pH 2. A new commercial automatic at-line system was tested, and the results were found to be in agreement with an older mercury drop system. The stability of the solid electrode systems was found to be from one to several days without any maintenance needed.     

MCSCF reaction-path energetics and thermal rate-constants for the reaction of3NH with H2

Summary The intrinsic reaction-path, reactants, transition state and products for the reaction of NH (^3–)+H₂ (¹ _g ⁺ ) NH₂ (²B₁)+H (²S) involving the lowest triplet electronic state of NH₃ were calculated using multi-configuration (MC) SCF methods. The calculated change of internal energy for the reaction of 11.0 kcal mol^–1 agrees with the experimental value within 2 kcal mol^–1. The barrier to reaction is 23.4 kcal mol^–1 high. The harmonic MCSCF reaction-path potential was calculated and canonical variational transition state theory calculations of the rate constants performed over a temperature range from 400 to 2500 K. The computed rate constants are generally two orders of magnitude smaller than those of the comparable reaction of OH with H₂, whereas those of the reverse reaction are by a factor of 20 larger than those of OH₂ with H.     

Understanding the factors controlling the photo-oxidation of natural DNA by enantiomerically pure intercalating ruthenium polypyridyl complexes through TA/TRIR studies with polydeoxynucleotides and mixed sequence oligodeoxynucleotides

Ruthenium polypyridyl complexes which can sensitise the photo-oxidation of nucleic acids and other biological molecules show potential for photo-therapeutic applications. In this article a combination of transient visible absorption (TrA) and time-resolved infra-red (TRIR) spectroscopy are used to compare the photo-oxidation of guanine by the enantiomers of [Ru(TAP)₂(dppz)]²⁺ in both polymeric {poly(dG-dC), poly(dA-dT) and natural DNA} and small mixed-sequence duplex-forming oligodeoxynucleotides. The products of electron transfer are readily monitored by the appearance of a characteristic TRIR band centred at ca. 1700 cm⁻¹ for the guanine radical cation and a band centered at ca. 515 nm in the TrA for the reduced ruthenium complex. It is found that efficient electron transfer requires that the complex be intercalated at a G-C base-pair containing site. Significantly, changes in the nucleobase vibrations of the TRIR spectra induced by the bound excited state before electron transfer takes place are used to identify preferred intercalation sites in mixed-sequence oligodeoxynucleotides and natural DNA. Interestingly, with natural DNA, while it is found that quenching is inefficient in the picosecond range, a slower electron transfer process occurs, which is not found with the mixed-sequence duplex-forming oligodeoxynucleotides studied.

Efficient electron transfer requires the complex to be intercalated at a G-C base-pair. Identification of preferred intercalation sites is achieved by TRIR monitoring of the nucleobase vibrations before electron transfer.     

International Measurement Evaluation Programme: IMEP-9, trace elements in water

The International Measurement Evaluation Programme (IMEP) is an interlaboratory comparison scheme, founded, owned and coordinated by the Institute for Reference Materials and Measurements (IRMM) since 1988. IMEP-9 is the third round of trace elements in water evaluation following IMEP-3 and IMEP-6. Reference values for 15 elements stating total concentrations and combined uncertainties (according to GUM) were established. The reference values were established mainly by isotope dilution mass spectrometry (IDMS) as a primary method of measurement, and values traceable to the SI were obtained. The four elements that could not be certified by IDMS were assigned values by means of other measurement techniques. Results from 201 laboratories from 35 countries and four continents were evaluated against the reference values and the comparability between the laboratories is presented graphically.     

Dynamics and energetics of the self-assembly of a hydrophobically modified polyelectrolyte: Naphthalene-labeled poly(acrylic acid)

Steady-state and time-resolved fluorescence studies were performed on aqueous solutions of poly(acrylic acid) hydrophobically modified with two very different levels of naphthalene (Np). It is demonstrated that unique information on association phenomena involving hydrophobe-modifed polymers can be obtained from an extended fluorescence study by using data for a less-modified polymer as a reference. For the more highly modified polymer, the presence of excited-state (as well as ground-state) dimers in addition to monomer emission due to locally excited naphthalene gives evidence for hydrophobic association between naphthalene groups. This association becomes, as expected, much less important at higher pH due to the electrostatic repulsion between different chain segments. However, it is noted that even at high pH there is a significant self-association. The coexistence of static and dynamic quenching phenomena of the Np monomer label was also revealed in the time-resolved fluorescence data. The data are compatible with the existence of two types of monomers and one excimer and suggest that the essential contribution to the monomer emission comes from isolated chromophores, whereas excimer formation arises from both a dynamic route (excited Np chromophores able to produce a dynamic excimer) and a static route (excitation of ground-state Np dimers). At room temperature, the dissociative reaction, excimer-to-monomer, can be neglected, and thus the rate constant for excimer formation and decay could be obtained with and without considering the influence of preformed dimers. Temperature has shown to induce different behavior in the polymer photophysics. In the case of the less-labeled polymer, the decays were found to be single-exponential with the fluorescence lifetime decreasing with increasing temperature. From the temperature dependence of the steady-state fluorescence data, the activation energy for excimer formation and the binding energy of the excimer were evaluated at different pH values, through the Stevens-Ban-type plots of the excimer-to-monomer intensity ratio. With the time-resolved data, measured in the temperature range of 5-60 degrees C, it was possible to extract the intrinsic activation energies for excimer formation. The thermodynamic driving force for the intrapolymeric association was found to be dependent on a balance between hydrophobic and electrostatic interactions, which are dependent on the pH, temperature, and hydrophobic content of the polymer.     

Encapsulated guest molecules in the dimer of octahydroxypyridine[4]arene

Recently a new type of calix[4]arenes has been synthesized via condensation of 2,6-dihydroxypyridine and a number of aldehydes. This type of pyridine[4]arenes forms capsules consisting of two single pyridine[4]arenes. These capsules can incorporate different guest molecules, like carboxylic acids and amides in this case. We proved that the guest acids really are incorporated inside the cavity of the capsules by electrospray mass spectrometry, NMR spectroscopy, and theoretical calculations.     

Two phenanthroline hydro­chlorides

The crystal and molecular structures of two phenanthroline hydro­chlorides have been determined at 173 K. 1,10‐Phenanthrolin‐1‐ium chloride, C₁₂H₉N₂⁺·Cl^?, crystallizes in two stacks of exactly planar mol­ecules. Both stacks are approximately parallel to the (02) plane and the planes composing the different stacks enclose an angle of 13.29 (3)°. Tris(1,10‐phenanthrolin‐1‐ium) dichloride (hydrogen chloride) chloride chloro­form solvate, 3C₁₂H₉N₂⁺·2Cl^?·HCl·Cl^?·CHCl₃, displays an interesting network of Cl^? mediated hydrogen bonds between the two different phenanthrolinium moieties and between a phenanthrolinium and the chloro­form solvate. In addition, a hydrogen bond between the HCl and the third Cl^? ion is formed. The C—N—C angle at the protonated N atoms is, in all phenanthrolinium units of both structures, significantly larger than the C—N—C angle at the non‐protonated N atom.     

A closed-shell coupled-cluster treatment of the Breit-Pauli first-order relativistic energy correction

First-order relativistic corrections to the energy of closed-shell molecular systems are calculated, using all terms in the two-component Breit-Pauli Hamiltonian. In particular, we present the first implementation of the two-electron Breit orbit-orbit integrals, thus completing the first-order relativistic corrections within the two-component Pauli approximation. Calculations of these corrections are presented for a series of small and light molecules, at the Hartree-Fock and coupled-cluster levels of theory. Comparisons with four-component Dirac-Coulomb-Breit calculations demonstrate that the full Breit-Pauli energy corrections represent an accurate approximation to a fully relativistic treatment of such systems. The Breit interaction is dominated by the spin-spin interaction, the orbit-orbit interaction contributing only about 10% to the total two-electron relativistic correction in molecules consisting of light atoms. However, the relative importance of the orbit-orbit interaction increases with increasing nuclear charge, contributing more than 20% in H(2)S.     

Microwave-assisted extraction of zearalenone from wheat and corn

A microwave-assisted extraction (MAE) method has been developed for determination of zearalenone in wheat and corn by LC-MS with an atmospheric pressure chemical ionization interface (APCI). Matrix effects were minimized by use of matrix-matched standard curves for quantification of the analyte. The limit of quantification (LOQ) of the method was 30 ng g(-1) in wheat and 20 ng g(-1) in corn. The rapid LC-MS method enabled analysis of the extracts without clean-up, thereby reducing analyte losses, the time required for the analytical procedure, and costs. A factorial design approach was used to examine the effect on extraction efficiency of the main extraction conditions - time, temperature, and solvent. On the basis of results from statistical assessment extraction was performed with 1:1 (v/v) methanol-acetonitrile at 80 degrees C for 5 min. When these extraction conditions were applied to a wheat sample from a recently conducted international proficiency test, 92% (103 ng g(-1)) of the assigned zearalenone concentration (112 ng g(-1)) in the test material was obtained. This result was within the uncertainty (u) range of the assigned value of the test material (u=+/-15.8 ng g(-1), alpha=0.05) thereby demonstrating the accuracy of the method was sufficient. The precision of the whole method was also confirmed to be adequate, because the observed relative standard deviation (RSD) of 12% (n=10) also fulfils the quality criteria recommended by European guidelines for in-house method validation.