圆柱形光声池结构及环境因素对声学本征频率的影响

以典型的圆柱形光声池为研究对象,建立光声池声学仿真有限元模型,并在此基础上,研究了光声池中谐振腔、缓冲腔、进出气孔结构参数以及温度、湿度因素对其声学本征频率的影响规律.研究结果表明:圆柱形光声池的进、出口孔对其声学本征频率影响极不敏感,设计计算中可以忽略不计,谐振腔的长度影响最为敏感,其次为谐振腔的直径.此外缓冲腔的长度与直径对其亦有一定影响,因而在准确计算时需要加以考虑.温度与湿度对光声池声学本征频率的影响均呈现正线性增长规律,温度的影响随着谐振腔长度的增大而减小,湿度的影响随着温度的升高而增大,仅计算光声池的声学本征频率时,湿度的影响在室温环境下且湿度变动较小的条件下可以忽略.     

山东大学(威海)开展的核物理研究

综述了山东大学威海校区原子核物理研究团队在原子核精细谱学、核天体物理、探测器研制和高能核物理等方向开展的研究工作及最新进展;尤其重点介绍了$A\sim 110$核区原子核的形状共存和带交叉延迟,“订书机”和“雨伞”模式转动带,碳氮氧循环过程中关键核反应的测量进展,中子星参数化的状态方程及双中子星并合引力波研究,带电粒子探测器的设计与制作,相对论重离子碰撞物理中量子输运理论和高阶反常输运等研究工作,并展望了下一步的工作重点。     

In-situ SiN combined with etch-stop barrier structure for high-frequency AlGaN/GaN HEMT

The etch-stop structure including the in-situ SiN and AlGaN/GaN barrier is proposed for high frequency applications.The etch-stop process is realized by placing an in-situ SiN layer on the top of the thin AlGaN barrier.F-based etching can be self-terminated after removing SiN,leaving the AlGaN barrier in the gate region.With this in-situ SiN and thin barrier etch-stop structure,the short channel effect can be suppressed,meanwhile achieving highly precisely controlled and low damage etching process.The device shows a maximum drain current of 1022 mA/mm,a peak transconductance of 459 mS/mm,and a maximum oscillation frequency(fmax)of 248 GHz.     

Spin-exchange relaxation of naturally abundant Rb in a K-Rb-~(21)Ne self-compensated atomic comagnetometer

The total effective spin-exchange relaxation of naturally abundant Rb in a K–Rb–21Ne comagnetometer is analyzed,and the results show that the coexistence of 87Rb and 85Rb isotopes in the same volume can lead to a large extra spinexchange broadening compared to pure 87Rb.This broadening mainly comes from the contribution of the equivalent reduction in the Rb spin-exchange rate.On this basis,an approximate relaxation model is proposed and experimentally demonstrated to be more accurate than that from a previous work.This study also provides a method for determining the properties of alkali-metal vapor cells.     

CaPtAs: A new noncentrosymmetric superconductor

We report the discovery of a new noncentrosymmetric superconductor CaPtAs.It crystallizes in a tetragonal structure(space group I41md,No.109),featuring three dimensional honeycomb networks of Pt-As and a much elongated c-axis(a=b=4.18?,and c=43.70?).The superconductivity of CaPtAs with Tc=1.47 K was characterized by means of electrical resistivity,specific heat,and ac magnetic susceptibility.The electronic specific heat Ce(T)/T shows evidence for a deviation from the behavior of a conventional BCS superconductor,and can be reasonably fitted by a p-wave model.The upper critical fieldμ0Hc2 of CaPtAs exhibits a moderate anisotropy,with an in-plane value of around 204 mT and an out-of-plane value of 148 mT.Density functional theory calculations indicate that the Pt-5 d and As-4 p orbitals mainly contribute to the density of states near the Fermi level,showing that the Pt-As honeycomb networks may significantly influence the superconducting properties.     

Towards the meV limit of the effective neutrino mass in neutrinoless double-beta decays

We emphasize that it is extremely important for future neutrinoless double-beta(0νββ)decay experiments to reach the sensitivity to the effective neutrino mass|mββ|≈1 meV.With such a sensitivity,it is highly possible to discover the signals of 0νββ decays.If no signal is observed at this sensitivity level,then either neutrinos are Dirac particles or stringent constraints can be placed on their Majorana masses.In this paper,assuming the sensitivity of|mββ|≈1 meV for future 0νββ decay experiments and the precisions on neutrion oscillation parameters after the JUNO experiment,we fully explore the constrained regions of the lightest neutrino mass m1 and two Majorana-type CP-violating phases{ρ,σ}.Several important conclusions in the case of normal neutrino mass ordering can be made.First,the lightest neutrino mass is severely constrained to a narrow range m1∈[0.7,8]meV,which together with the precision measurements of neutrino mass-squared differences from oscillation experiments completely determines the neutrino mass spectrum m2∈[8.6,11.7]meV ing phases is limited to ρ∈[130°,230°],which cannot be obtained from any other realistic experiments.Third,the sum of three neutrino masses is found to beΣ≡m1+m2+m3∈[59.2,72.6]meV,while the effective neutrino mass for beta decays turns out to be mβ≡(|Ue1|2m1^2+|Ue2|2m2^2+|Ue3|2m3^2)1/2∈[8.9,12.6]meV.These observations clearly set up the roadmap for future non-oscillation neutrino experiments aiming to solve the fundamental problems in neutrino physics.     

Fusion Domain-Adaptation CNN Driven by Images and Vibration Signals for Fault Diagnosis of Gearbox Cross-Working Conditions

The vibration signal of gearboxes contains abundant fault information, which can be used for condition monitoring. However, vibration signal is ineffective for some non-structural failures. In order to resolve this dilemma, infrared thermal images are introduced to combine with vibration signals via fusion domain-adaptation convolutional neural network (FDACNN), which can diagnose both structural and non-structural failures under various working conditions. First, the measured raw signals are converted into frequency and squared envelope spectrum to characterize the health states of the gearbox. Second, the sequences of the frequency and squared envelope spectrum are arranged into two-dimensional format, which are combined with infrared thermal images to form fusion data. Finally, the adversarial network is introduced to realize the state recognition of structural and non-structural faults in the unlabeled target domain. An experiment of gearbox test rigs was used for effectiveness validation by measuring both vibration and infrared thermal images. The results suggest that the proposed FDACNN method performs best in cross-domain fault diagnosis of gearboxes via multi-source heterogeneous data compared with the other four methods.     

通用法制备石墨烯/硫化铜微米花和石墨烯/硫化亚锡 微米花及在水污染处理中的应用

以L-组氨酸辅助和微波加热相结合,得到了石墨烯/硫化铜微米花和石墨烯/硫化亚锡微米花的通用制备技术.通过扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线衍射分析(XRD)、傅里叶变换红外光谱仪(FTIR)、X光电子能谱(XPS)等手段对样品进行了形貌观察和物相分析,并阐明了获得石墨烯/硫化铜花瓣和石墨烯/硫化亚锡花瓣的形成机理.对其光催化性能的研究结果表明,在可见光照射下,石墨烯/硫化铜花瓣和石墨烯/硫化亚锡花瓣能够降解溶液中83.5;(40 min内)和90.4;(50 min内)的甲基橙,表现出优异的可见光催化效果.     

锌型复合无机抗菌材料的制备及性能研究

运用溶胶-凝胶法制备出二氧化硅载体,采用液相浸渍法制备得到锌型复合无机抗菌材料.结合响应曲面方法,考察了Zn2+浓度、pH和Tb3+浓度对材料抗菌率的影响,选取了较优制备条件:Zn2+浓度为0.3 mol·L-1,pH值为9,Tb3+浓度为0.01 mol·L-1.以大肠杆菌为菌种,通过稀释涂布平板法,对材料进行抗菌性能检测,抗菌结果表明,掺杂Tb3+后材料抗菌率从76;提高到97;,较优样的最小杀菌浓度为5.5 g/L.通过XRD、FTIR、SEM、EDS和BET方法对材料的结构进行表征,结果表明:载体二氧化硅为无定形态,材料中主要的抗菌成分是纤锌矿结构的ZnO,且呈絮状和花瓣状生长,锌元素质量分数为16.96;,掺杂铽元素后材料的比表面积明显增大,增加了材料与细菌的接触面积,从而抗菌性能显著提高.     

接地式三要素型动力吸振器性能分析

利用固定点理论优化接地类型的动力吸振器得到的结果可能不是全局最优参数,在选择其他参数时主系统可以获得更小的振幅, 接地类型动力吸振器的优化问题值得进一步研究. 因此,以一种接地式三要素型动力吸振器为对象,通过研究系统参数变化对固 定点位置与主系统最大振幅的影响,得到了此吸振器的局部最优参数并分析了它的性能. 首先建立了此系统模型的运动微分方程, 得到了主系统振幅放大因子,发现系统存在3个与阻尼无关的固定点. 固定点中幅值较大点随系统参数变化的趋势可以代表最大振 幅随系统参数变化的趋势,因此利用盛金公式得到了固定点幅值的表达式. 为了更加精确,进一步使用数值算法得到了最大振幅与 系统参数的关系图,发现系统中存在局部最优参数. 通过对比接地式吸振器与接地三要素型吸振器的最大振幅随系统参数变化的趋 势,得到了接地式三要素型吸振器的局部最优参数,并发现当固有频率比小于局部最优频率比时,接地式三要素型吸振器模型主系 统的最大振幅要远小于接地式动力吸振器模型.