Ethylene polymerization over supported MAO/(nBuCp)2ZrCl2 catalysts: Influence of support properties

The catalytic system methylaluminoxane (MAO) and bis(n-butylcyclopentadienyl)zirconium dichloride ((nBuCp)₂ZrCl₂) was immobilized on commercial silica, silica-alumina and aluminophosphate calcined at different temperatures. The properties of the supports were determined by using N₂ adsorption-desorption isotherms at 77 K, FT-IR spectroscopy and SEM. After aluminium and zirconium impregnation, the catalysts were analyzed by ICP-AES, FT-IR and UV-vis spectroscopy. Ethylene polymerizations were carried out in a Schlenk tube at 70 °C and 1.2 bar of ethylene pressure. The polyethylene obtained was characterized by GPC, DSC and SEM.Catalysts supported on silica-alumina exhibited higher polymerization activity than those supported on silica and aluminophosphate. Besides, the activity of MAO/(nBuCp)₂ZrCl₂ catalytic system supported on silica-alumina and aluminophosphate decreased strongly with support calcination temperature, while remained almost constant when silica was employed as support. All these experimental features suggest a role of the support acid properties and hydroxyl group population in the generation of active polymerization species.     

A study of the mechanism of response of liquid ion exchanger calcium selective electrodes: Part III. Membrane behaviour under non-zero current conditions

The I-E response of the liquid membrane of the calcium selective electrode is studied under constant or linearly varying current and voltage. An increase in the membrane resistance, recorded when an electrical current crosses the membrane, is due to the outflow of Cl^? ions initially present in the membrane. When calcium ions are replaced by alkaline ions inside the membrane at constant current, the decrease of the membrane resistance due to an ion exchange is in agreement with the conductivity measurements (Part II). When the applied voltage is imposed besides the ion exchange one must take into account the interfacial overpotential to explain the important rectification effect observed. The interfacial transfer constant rate of alkaline ions seems greater than that of Ca²⁺ ion.     

Unraveling the crystallization mechanism of CoAPO-5 molecular sieves under hydrothermal conditions

The hydrothermal crystallization of CoAPO-5 molecular sieves has been studied using time-resolved in-situ SAXS/WAXS, UV-vis, Raman, and XAS. Data collected during heating to 180 degrees C allowed the observation of different steps occurring during the transformation of the amorphous gel into a crystalline material from a macroscopic and atomic perspective. Raman spectroscopy detected the initial formation of Al-O-P bonds, whereas SAXS showed that these gel particles had a broad size distribution ranging from ca. 7 to 20 nm before crystallization began. WAXS showed that this crystallization was sharp and occurred at around 160 degrees C. Analysis of the crystallization kinetics suggested a one-dimensional growth process. XAS showed that Co(2+) transformed via a two-stage process during heating involving (i) a gradual transformation of octahedral coordination into tetrahedral coordination before the appearance of Bragg peaks corresponding to AFI, suggesting progressive incorporation of Co(2+) into the poorly ordered Al-O-P network up to ca. 150 degrees C, and (ii) a rapid transformation of remaining octahedral Co(2+) at the onset of crystallization. Co(2+) was observed to retard crystallization of AFI but provided valuable information regarding the synthesis process by acting as an internal probe. A three-stage, one-dimensional crystallization mechanism is proposed: (i) an initial reaction between aluminum and phosphate units forming a primary amorphous phase, (ii) progressive condensation of linear Al-O-P chains forming a poorly ordered structure separated by template molecules up to ca. 155 degrees C, and (iii) rapid internal reorganization of the aluminophosphate network leading to crystallization of the AFI crystal structure.     

Mechanistic study into the direct epoxidation of propene over gold/titania catalysts

The epoxidation of propene over gold/titania based catalysts was investigated using different techniques. Infrared spectroscopic information showed that one key step in the reaction mechanism is a reaction catalyzed by gold between titania surface groups and propene. In this reaction step, a bidentate propoxy species is formed on titania. This species adsorbs strongly on the catalyst, and it is the same species which is formed when propene oxide adsorbs on titania. Gravimetrical adsorption experiments and catalytic tests show that product adsorption and desorption are important factors determining the catalytic activity and the catalyst stability. By combining the information from different techniques, a kinetic mechanism is proposed.     

A boxmodel development to study the relationships between the photo-oxidants and the particles formation in the troposphere

The model BAGS (Boxmodel for Aerosol and Gasphase Simulations) has been developed. It is composed of two major modules: the first one describes the system of the chemical reactions in the gaseous phase, the second one calculates the aerosol chemical composition and the dimensional distribution of the particles. The boxmodel has been developed with the introduction of new chemical and physical processes, not previously included, in particular the formation of Secondary Organic Aerosol. The other implemented processes are a module for the dynamic of the particle population, nucleation, coagulation and dry deposition. The last phase of the work has been a check of the BAGS capabilities by a series of tests, that have permitted to compare it with other models (MAPS and MADM). The tests in particular have concerned the aerosol water content prediction, the photochemistry, the condensation of the inorganic compounds and the formation of Secondary Organic Aerosol.     

On the preparation of 2-halo alkyl substituted 1,3-dioxolanes and 1,3-dioxanes

Several methods for the preparation of 2-perfluoromethyl-substituted 1,3-dioxolanes and 1,3-dioxanes were tried. The method of Nerdel for the preparation of 1,3-dioxolanes, making use of the condensation between carbonyl compounds and oxiranes, was found to be suitable for perhalogenated ketones and aldehydes, and may even be extended to oxetanes, affording 2-perhaloalkylated 1,3-dioxanes.The yield of the cyclic acetals drops with inreasing substitution.     

The chemistry of fluorine containing phosphaalkenes, arsaalkenes and selenocarbonyls

This review covers our extensive research activities in the area of fluorine containing phospha- and arsaalkenes as well as selenocarbonyls, which differ considerably in their properties and reactivities from their alkyl and aryl counterparts and thus contribute in a gratifying manner to the still growing field of unsaturated element-carbon compounds of 3rd and 4th row main group elements E. Of particular interest is the influence of the fluorine substituents and other small groups (OR, NR₂) with either inductive and/or mesomeric effects on the polarity and reactivity of the EC bond. Addition reactions of proton acidic and hydridic polar HX reactants as well as [2+2], [3+2] and [4+2] cycloadditions have been thoroughly studied. The results obtained allow a classification of the EC systems within five different types, A to E, and prove a change from “normal” to “inverse” heteroalkenes in this sequence. The ligand properties of some derivatives have also been investigated in some detail.     

A gas electron diffraction and ab initio quantum-mechanical investigation into the molecular structure of tricyclo-(3.1.002,4)-hexane

The structure of tricyclo-(3.1.00^2,4)exane has been determined by gas phase electron diffraction. The molecule has an inversion centre. The mean carbon—carbon bond length, averaged over both three- and four-membered rings is 1.508 A. A model with equal C-C bond lengths fits to the measured diffraction intensities. The four-membered ring is planar with valency angles of 90°, while the carbon atoms of the three-membered rings form isosceles triangles. Ab initio quantum mechanical calculations at the STO-3G level support this geometry. The valency angle CCC (between three- and four-membered rings) for the equilateral four-membered ring model has been found experimentally to be 109.9°. The average C-H bond distance (1.080 Å) is small as a result of increased s-character in these bonds in agreement with reported INDO—LMO calculations.     

Obtention de selenopysultones lors de l'oxydation de thio-1 chromenes par le dioxyde de selenium

Selenium dioxide oxidation of 1-thiochromene leads to 3-formyl (5,6)benzo-1,2 thiaseleninne-1,1-dioxide, which is a representative of a hitherto unknown class of heterocyclic compounds. Pyrolysis of this compound leads to 2-formyl benzo(b)selenophen, by loss of sulphur dioxide. The reaction can be applied to other 1 thiochromenes but no similar behaviour has been observed for their selenium isologues.     

Practical asymmetric enzymatic reduction through discovery of a dehydrogenase-compatible biphasic reaction media

[reaction: see text] An enzyme-compatible biphasic reaction media for the asymmetric biocatalytic reduction of ketones with in situ cofactor regeneration has been developed. In this biphasic reaction media, which is advantageous for reactions at higher substrate concentrations, both enzymes (alcohol dehydrogenase and FDH from Candida boidinii) remain stable. The reductions with poorly water-soluble ketones were carried out at substrate concentrations of 10-200 mM, and the optically active (S)-alcohols were formed with moderate to good conversions and with up to >99% ee.