Differential geometric analysis of alterations in MH α‐helices

Antigen presenting cells present processed peptides via their major histocompatibility (MH) complex to the T cell receptors (TRs) of T cells. If a peptide is immunogenic, a signaling cascade can be triggered within the T cell. However, the binding of different peptides and/or different TRs to MH is also known to influence the spatial arrangement of the MH α‐helices which could itself be an additional level of T cell regulation. In this study, we introduce a new methodology based on differential geometric parameters to describe MH deformations in a detailed and comparable way. For this purpose, we represent MH α‐helices by curves. On the basis of these curves, we calculate in a first step the curvature and torsion to describe each α‐helix independently. In a second step, we calculate the distribution parameter and the conical curvature of the ruled surface to describe the relative orientation of the two α‐helices. On the basis of four different test sets, we show how these differential geometric parameters can be used to describe changes in the spatial arrangement of the MH α‐helices for different biological challenges. In the first test set, we illustrate on the basis of all available crystal structures for (TR)/pMH complexes how the binding of TRs influences the MH helices. In the second test set, we show a cross evaluation of different MH alleles with the same peptide and the same MH allele with different peptides. In the third test set, we present the spatial effects of different TRs on the same peptide/MH complex. In the fourth test set, we illustrate how a severe conformational change in an α‐helix can be described quantitatively. Taken together, we provide a novel structural methodology to numerically describe subtle and severe alterations in MH α‐helices for a broad range of applications. © 2013 Wiley Periodicals, Inc.     

Synthesis of 2,2,5,5‐Tetrasubstituted 1,4‐Dioxa‐2,5‐disilacyclohexanes via Organotin(IV)‐Catalyzed Transesterification of (Acetoxymethyl)alkoxysilanes

(Acetoxymethyl)silanes 2 , 7 a – c , and 10 a – c with at least one alkoxy group, of the general formula (AcOCH₂)Si(OR)_3?n(CH₃)_n (R: Me, Et, iPr; n=0, 1, 2), were synthesized from the corresponding (chloromethyl)silanes 1 , 6 a – c , and 9 a – c by treatment with potassium acetate under phase‐transfer‐catalysis conditions. These compounds were found to provide 2,2,5,5‐organo‐substituted 1,4‐dioxa‐2,5‐disilacyclohexanes 3 , 8 a – c , and 11 a – c if treated with organotin(IV) catalysts such as dioctyltin oxide. The reaction proceeds through transesterification of the acetoxy and alkoxy units followed by ring‐closure to form a dimeric six‐membered ring. The corresponding alkyl acetates are formed as the reaction by‐products. With these mild conditions, the method overcomes the drawbacks of previously reported synthetic routes to furnish 2,2,5,5‐tetramethyl‐1,4‐dioxa‐2,5‐disilacyclohexane ( 3 ) and even allows the synthesis of 1,4‐dioxa‐2,5‐disilacyclohexanes bearing hydrolytically labile alkoxy substituents at the silicon atom in good yields and high purity. These new materials were fully characterized by NMR spectroscopy, elemental analysis, mass spectrometry, and X‐ray analysis (trans‐ 8 a ).     

Sonication‐Induced Coiled Fibrous Architectures of Boc‐L‐Phe‐L‐Lys(Z)‐OMe

An ultra‐short peptide Boc‐L ‐Phe‐L ‐Lys(Z)‐OMe (Z=carbobenzyloxy) was shown to act as a highly efficient and versatile low molecular weight gelator (LMWG) for a variety of aliphatic and aromatic solvents under sonication. Remarkably, this simple dipeptide is not only able to form coiled fibres but also demonstrates self‐healing and thermal chiroptical switching behaviour. The formation of coiled assemblies was found to be influenced by the nature of the solvent and the presence of an additive. By exploiting these properties it was possible to modulate the macroscopic and microscopic properties of the organogels of this ultra‐short peptide, allowing the formation of highly ordered single‐domain networks of helical fibres with dimeric or alternatively fibre‐bundle morphology. The organogels were characterized by using FTIR, SEM, NMR and circular dichroism (CD) spectroscopy. Interestingly, CD experiments showed that the organogels of Boc‐L ‐Phe‐L ‐Lys(Z)‐OMe in aromatic solvents exhibit thermal chiroptical switching. This behaviour was hypothesized to stem from changes in the morphology of the gel accompanied by conformational transformation of the gelling agent. The fact that such a small peptide can demonstrate hierarchical assemblies and the possibility of controlling the self‐association is rather intriguing. The self‐healing ability, chiroptical switching and more importantly the formation of helical assemblies by Boc‐L ‐Phe‐L ‐Lys(Z)‐OMe under sonication, make this dipeptide an interesting example of the self‐assembly ability of ultra‐short peptides.     

Functionalization of Metal–Organic Frameworks through the Postsynthetic Transformation of Olefin Side Groups

For the first time, the adaptability of the C?C double bond as a versatile precursor for the postsynthetic modification (PSM) of microporous materials was extensively investigated and evaluated. Therefore, an olefin‐tagged 4,4′‐bipyridine linker was synthesized and successfully introduced as pillar linker within a 9,10‐triptycenedicarboxylate (TDC) zinc paddle‐wheel metal–organic framework (MOF) through microwave‐assisted synthesis. Different reactions, predominately used in organic chemistry, were tested, leading to the development of new postsynthetic reactions for the functionalization of solid materials. The postsynthetic oxidation of the olefin side groups applying osmium tetroxide (OsO₄) as a catalyst led to the formation of a microporous material with free vicinal diol functionalities. The epoxidation with dimethyldioxirane (DMDO) enabled the synthesis of epoxy‐functionalized MOFs. In addition to that, reaction procedures for a postsynthetic hydroboration with borane dimethyl sulfide as well as a photoinduced thiol–ene click reaction with ethyl mercaptan were developed. For all of these PSMs, yields of more than 90 % were obtained, entirely maintaining the crystallinity of the MOFs. Since the direct introduction of the corresponding groups by means of pre‐synthetic approaches is hardly possible, these new PSMs are useful tools for the functionalization of porous solids towards applications such as selective adsorption, separation, and catalysis.     

Identification of lipophilic bioproduct portfolio from bioreactor samples of extreme halophilic archaea with HPLC-MS/MS

Extreme halophilic archaea are a yet unexploited source of natural carotenoids. At elevated salinities, however, material corrosivity issues occur and the performance of analytical methods is strongly affected. The goal of this study was to develop a method for identification and downstream processing of potentially valuable bioproducts produced by archaea. To circumvent extreme salinities during analysis, a direct sample preparation method was established to selectively extract both the polar and the nonpolar lipid contents of extreme halophiles with hexane, acetone and the mixture of MeOH/MTBE/water, respectively. Halogenated solvents, as used in conventional extraction methods, were omitted because of environmental considerations and potential process scale-up. The HPLC-MS/MS method using atmospheric pressure chemical ionization was developed and tuned with three commercially available C₄₀ carotenoid standards, covering the wide polarity range of natural carotenoids, containing different number of OH-groups. The chromatographic separation was achieved on a C₃₀ RP-HPLC column with a MeOH/MTBE/water gradient. Polar lipids, the geometric isomers of the C₅₀ carotenoid bacterioruberin, and vitamin MK-8 were the most valuable products found in bioreactor samples. In contrast to literature on shake flask cultivations, no anhydrous analogues of bacterioruberin, as by-products of the carotenoid biosynthesis, were detected in bioreactor samples. This study demonstrates the importance of sample preparation and the applicability of HPLC-MS/MS methods on real samples from extreme halophilic strains. Furthermore, from a biotechnological point-of-view, this study would like to reveal the relevance of using controlled and defined bioreactor cultivations instead of shake flask cultures in the early stage of potential bioproduct profiling.     

Reduction Approaches for Thermogasdynamic Lubrication Problems

Gas thrust bearings are often used in low-load applications, e.g. in air cycle machines, in micro gas turbines or in rotor systems for fuel cell applications, to support a shaft in axial direction. The pressure and temperature distribution in a gas thrust bearing pad are described by the generalized Reynolds equation according to Dowson and the 3D energy equation. In this paper, two different approaches are presented in order to reduce the dimension of the governing nonlinear integro-differential equation system and in order to stabilize the solution process. In the first reduction approach, the temperature in the fluid is averaged across the fluid film according to Lee and Kim. In the second approach, Legendre polynomials are used to approximate temperature, density and fluidity across the fluid film according to Elrod, Brewe and Moraru. The reduction techniques are compared with respect to numerical efficiency, accuracy and convergence behavior. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Guided Antitumoural Drugs: (Imidazol-2-ylidene)(L)gold(I) Complexes Seeking Cellular Targets Controlled by the Nature of Ligand L

Three [1,3-diethyl-4-(p-methoxyphenyl)-5-(3,4,5-trimethoxyphenyl)imidazol-2-ylidene](L)gold(I) complexes, 4 a (L=Cl), 5 a (L=PPh₃), and 6 a (L=same N-heterocyclic carbene (NHC)), and their fluorescent [4-(anthracen-9-yl)-1,3-diethyl-5-phenylimidazol-2-ylidene](L)gold(I) analogues, 4 b , 5 b , and 6 b , respectively, were studied for their localisation and effects in cancer cells. Despite their identical NHC ligands, the last three accumulated in different compartments of melanoma cells, namely, the nucleus ( 4 b ), mitochondria ( 5 b ), or lysosomes ( 6 b ). Ligand L was also more decisive for the site of accumulation than the NHC ligand because the couples 4 a / 4 b , 5 a / 5 b , and 6 a / 6 b , carrying different NHC ligands, afforded similar results in cytotoxicity tests, and tests on targets typically found at their sites of accumulation, such as DNA in nuclei, reactive oxygen species and thioredoxin reductase in mitochondria, and lysosomal membranes. Regardless of the site of accumulation, cancer cell apoptosis was eventually induced. The concept of guiding a bioactive complex fragment to a particular subcellular target by secondary ligand L could reduce unwanted side effects.     

Existence,Non-existence,and Uniqueness for a Heat Equation with Exponential Nonlinearity in ℝ2

We consider a semilinear heat equation with exponential nonlinearity in ?². We prove that local solutions do not exist for certain data in the Orlicz space exp L ²(?²), even though a small data global existence result holds in the same space exp L ²(?²). Moreover, some suitable subclass of exp L ²(?²) for local existence and uniqueness is proposed.

     

A Deadly Organometallic Luminescent Probe: Anticancer Activity of a ReI Bisquinoline Complex

The photophysical properties of [Re(CO)₃(L ‐N₃)]Br (L ‐N₃=2‐azido‐N,N‐bis[(quinolin‐2‐yl)methyl]ethanamine), which could not be localized in cancer cells by fluorescence microscopy, have been revisited in order to evaluate its use as a luminescent probe in a biological environment. The Re^I complex displays concentration‐dependent residual fluorescence besides the expected phosphorescence, and the nature of the emitting excited states have been evaluated by DFT and time‐dependent (TD) DFT methods. The results show that fluorescence occurs from a ¹LC/MLCT state, whereas phosphorescence mainly stems from a ³LC state, in contrast to previous assignments. We found that our luminescent probe, [Re(CO)₃(L ‐N₃)]Br, exhibits an interesting cytotoxic activity in the low micromolar range in various cancer cell lines. Several biochemical assays were performed to unveil the cytotoxic mechanism of the organometallic Re^I bisquinoline complex. [Re(CO)₃(L ‐N₃)]Br was found to be stable in human plasma indicating that [Re(CO)₃(L ‐N₃)]Br itself and not a decomposition product is responsible for the observed cytotoxicity. Addition of [Re(CO)₃(L ‐N₃)]Br to MCF‐7 breast cancer cells grown on a biosensor chip micro‐bioreactor immediately led to reduced cellular respiration and increased glycolysis, indicating a large shift in cellular metabolism and inhibition of mitochondrial activity. Further analysis of respiration of isolated mitochondria clearly showed that mitochondrial respiratory activity was a direct target of [Re(CO)₃(L ‐N₃)]Br and involved two modes of action, namely increased respiration at lower concentrations, potentially through increased proton transport through the inner mitochondrial membrane, and efficient blocking of respiration at higher concentrations. Thus, we believe that the direct targeting of mitochondria in cells by [Re(CO)₃(L ‐N₃)]Br is responsible for the anticancer activity.