High toxicity and specificity of the saponin 3-GlcA-28-AraRhaxyl-medicagenate, from Medicago truncatula seeds, for Sitophilus oryzae

Background

Because of the increasingly concern of consumers and public policy about problems for environment and for public health due to chemical pesticides, the search for molecules more safe is currently of great importance. Particularly, plants are able to fight the pathogens as insects, bacteria or fungi; so that plants could represent a valuable source of new molecules.

Results

It was observed that Medicago truncatula seed flour displayed a strong toxic activity towards the adults of the rice weevil Sitophilus oryzae (Coleoptera), a major pest of stored cereals. The molecule responsible for toxicity was purified, by solvent extraction and HPLC, and identified as a saponin, namely 3-GlcA-28-AraRhaxyl-medicagenate. Saponins are detergents, and the CMC of this molecule was found to be 0.65?mg per mL. Neither the worm Caenorhabditis elegans nor the bacteria E. coli were found to be sensitive to this saponin, but growth of the yeast Saccharomyces cerevisiae was inhibited at concentrations higher than 100???g per mL. The purified molecule is toxic for the adults of the rice weevils at concentrations down to 100???g per g of food, but this does not apply to the others insects tested, including the coleopteran Tribolium castaneum and the Sf9 insect cultured cells.

Conclusions

This specificity for the weevil led us to investigate this saponin potential for pest control and to propose the hypothesis that this saponin has a specific mode of action, rather than acting via its non-specific detergent properties.     

Plate coating: influence of concentrated surfactants on the film thickness

We present a large range of experimental data concerning the influence of surfactants on the well-known Landau-Levich-Derjaguin experiment where a liquid film is generated by pulling a plate out of a bath. The thickness h of the film was measured as a function of the pulling velocity V for different kinds of surfactants (C(12)E(6), which is a nonionic surfactant, and DeTAB and DTAB, which are ionic) and at various concentrations near and above the critical micellar concentration (cmc). We report the thickening factor α = h/h(LLD), where h(LLD) is the film thickness obtained without a surfactant effect, i.e., as for a pure fluid but with the same viscosity and surface tension as the surfactant solution, over a wide range of capillary numbers (Ca = ηV/γ, with η being the surfactant solution viscosity and γ its surface tension) and identify three regimes: (i) at small Ca α is large due to confinement and surface elasticity (or Marangoni) effects, (ii) for increasing Ca there is an intermediate regime where α decreases as Ca increases, and (iii) at larger (but still small) Ca α is slightly higher than unity due to surface viscosity effects. In the case of nonionic surfactants, the second regime begins at a fixed Ca, independent of the surfactant concentration, while for ionic surfactants the transition depends on the concentration, which we suggest is probably due to the existence of an electrostatic barrier to surface adsorption. Control of the physical chemistry at the interface allowed us to elucidate the nature of the three regimes in terms of surface rheological properties.     

Unraveling the mechanism of catalytic reduction of O2 by microperoxidase-11 adsorbed within a transparent 3D-nanoporous ITO film

Nanoporous films of indium tin oxide (ITO), with thicknesses ranging from 250 nm to 2 μm, were prepared by Glancing Angle Deposition (GLAD) and used as highly sensitive transparent 3D-electrodes for quantitatively interrogating, by time-resolved spectroelectrochemistry, the reactivity of microperoxidase-11 (MP-11) adsorbed within such films. The capacitive current densities of these 3D-electrodes as well as the amount of adsorbed MP-11 were shown to be linearly correlated to the GLAD ITO film thickness, indicating a homogeneous distribution of MP-11 across the film as well as homogeneous film porosity. Under saturating adsorption conditions, MP-11 film concentration as high as 60 mM was reached. This is equivalent to a stack of 110 monolayers of MP-11 per micrometer film thickness. This high MP-11 film loading combined with the excellent ITO film conductivity has allowed the simultaneous characterization of the heterogeneous one-electron transfer dynamics of the MP-11 Fe(III)/Fe(II) redox couple by cyclic voltammetry and cyclic voltabsorptometry, up to a scan rate of few volts per second with a satisfactory single-scan signal-to-noise ratio. The potency of the method to unravel complex redox coupled chemical reactions was also demonstrated with the catalytic reduction of oxygen by MP-11. In the presence of O(2), cross-correlation of electrochemical and spectroscopic data has allowed us to determine the key kinetics and thermodynamics parameters of the redox catalysis that otherwise could not be easily extracted using conventional protein film voltammetry. On the basis of numerical simulations of cyclic voltammograms and voltabsorptograms and within the framework of different plausible catalytic reaction schemes including appropriate approximations, it was shown possible to discriminate between different possible catalytic pathways and to identify the relevant catalytic cycle. In addition, from the best fits of simulations to the experimental voltammograms and voltabsorptograms, the partition coefficient of O(2) for the ITO film as well as the values of two kinetic rate constants could be extracted. It was finally concluded that the catalytic reduction of O(2) by MP-11 adsorbed within nanoporous ITO films occurs via a 2-electron mechanism with the formation of an intermediate Fe(III)-OOH adduct characterized by a decay rate of 11 s(-1). The spectroelectroanalytical strategy presented here opens new opportunities for characterizing complex redox-coupled chemical reactions not only with redox proteins, but also with redox biomimetic systems and catalysts. It might also be of great interest for the development and optimization of new spectroelectrochemical sensors and biosensors, or eventually new photoelectrocatalytic systems or biofuel cells.     

In situ synthesis of Cu-BTC (HKUST-1) in macro-/mesoporous silica monoliths for continuous flow catalysis

The metal-organic framework Cu-BTC has been successfully synthesized as nanoparticles inside the mesopores of silica monoliths featuring a homogeneous macropore network enabling the use of Cu-BTC for continuous flow applications in liquid phase with low pressure drop. High productivity was reached with this catalyst for the Friedl?nder reaction.     

Molecular dynamics study of hydration in ethanol-water mixtures using a polarizable force field

The abnormal physicochemical characteristics of ethanol solvation in water are commonly attributed to the phenomenon of hydrophobic hydration. To investigate the structural organization of hydrophobic hydration in water-ethanol mixtures, we use molecular dynamics simulations based on detailed atomic models. Induced polarization is incorporated into the potential function on the basis of the classical Drude oscillator model. Water-ethanol mixtures are simulated at 11 ethanol molar fractions, from 0.05 to 0.9. Although the water and ethanol models are parametrized separately to reproduce the vaporization enthalpy, static dielectric constant, and self-diffusion constant of neat liquids at ambient conditions, they also reproduce the energetic and dynamical properties of the mixtures accurately. Furthermore, the calculated dielectric constant for the various water-alcohol mixtures is in excellent agreement with experimental data. The simulations provide a detailed structural characterization of the mixtures. A depletion of water-water hydrogen bonding in the first hydration shell of ethanol is compensated by an enhancement in the second hydration shell. The structuring effect from the second solvation shell gives rise to a net positive hydrogen-bonding excess for ethanol molar fractions up to approximately 0.5. For larger molar fractions, the second hydration shell is not sufficiently populated to overcome the net H-bond depletion from the first shell.     

Density-functional theory (hyper)polarizabilities of push-pull pi-conjugated systems: treatment of exact exchange and role of correlation

The performance of the optimized effective potential procedure for exact exchange in calculating static electric-field response properties of push-pull pi-conjugated systems has been studied, with an emphasis on NO2-(CH=CH)n-NH2 chains. Good agreement with Hartree-Fock dipole moments and (hyper)polarizabilities is obtained; particularly noteworthy is the chain length dependence for beta/n. Thus, the problem that conventional density-functional theory functionals dramatically overestimate these properties is largely solved, although there remains a significant correlation contribution that cannot be accounted for with current correlation functionals.     

Synthesis of activated carbon foams with high specific surface area using polyurethane elastomer templates for effective removal of methylene blue

Carbon foams have gained significant attention due to their tuneable properties that enable a wide range of applications including catalysis, energy storage and wastewater treatment. Novel synthesis pathways enable novel applications via yielding complex, hierarchical material structure. In this work, activated carbon foams (ACFs) were produced from waste polyurethane elastomer templates using different synthesis pathways, including a novel one-step method. Uniquely, the produced foams exhibited complex structure and contained carbon microspheres. The ACFs were synthesized by impregnating the elastomers in an acidified sucrose solution followed by direct activation using CO₂ at 1000 ℃. Different pyrolysis and activation conditions were investigated. The ACFs were characterized by a high specific surface area (S_BET) of 2172 m²/g and an enhanced pore volume of 1.08 cm³/g. Computer tomography and morphological studies revealed an inhomogeneous porous structure and the presence of numerous carbon spheres of varying sizes embedded in the porous network of the three-dimensional carbon foam. X-ray diffraction (XRD) and Raman spectroscopy indicated that the obtained carbon foam was amorphous and of turbostratic structure. Moreover, the activation process enhanced the surface of the carbon foam, making it more hydrophilic via altering pore size distribution and introducing oxygen functional groups. In equilibrium, the adsorption of methylene blue on ACF followed the Langmuir isotherm model with a maximum adsorption capacity of 592 mg/g. Based on these results, the produced ACFs have potential applications as adsorbents, catalyst support and electrode material in energy storage systems.     

Synthesis of oligosaccharides catalyzed by thermostable β-glucosidase fromPyrococcus furiosus

Focusing on CO₂ fixation, photoautotrophic cultivation of the red algaPorphyridium cruentum was investigated by means of a batch culture under a 5% CO₂-enriched atmosphere. The algal growth kinetics was successfully described with a logistic model, and simulation of a continuous culture under the optimum growth conditions (30°C, 12 klux and 1.18 g-cells/L) showed that the algal CO₂-fixation activity could reach 0.66 g-CO₂/(L X d). Under the same growth conditions, eicosapentaenoic acid (20:5 n-3, EPA) and arachidonic acid (20:4 n-6, ARA) yields were similarly calculated to be 3.6 mg-EPA/(L X d) and 6.5 mg-ARA/(L X d), respectively.