Reversible Immobilization of Urease by Using Bacterial Cellulose Nanofibers

In this work, bacterial cellulose nanofibers were produced by using the Gluconacetobacter hansenii HE1 strain. These nanofibers were derivatized with dye affinity ligand Reactive Green 5, and these newly synthesized dye-attached nanofibers were used for affinity adsorption of urease. Reactive Green 5-attached nanofibers were characterized by Fourier transform infrared spectroscopy, SEM, and energy-dispersive x-ray spectroscopy analysis. Some adsorption conditions which significantly affect the adsorption efficiency were investigated. The maximum urease adsorption capacity was found to be 240 mg/g nanofiber in pH 6.0 and at room temperature. Dye-free plain nanofibers also used for studying nonspecific urease adsorption onto plain nanofibers and nonspecific adsorption were found to be negligible (3.5 mg/g nanofiber). Prepared dye-attached nanofibers can be used in five successive adsorption/desorption steps without any decrease in their urease adsorption capacity. The desorption rate of the adsorbed urease was found to be 98.9 %. The activity of the urease was also investigated, and it was found that free and desorbed urease from the dye-attached nanofibers showed similar specific activity.     

Toward direct determination of conformations of protein building units from multidimensional NMR experiments. V. NMR chemical shielding analysis of N-formyl-serinamide,a model for polar side-chain containing peptides

Knowledge of chemical shift-structure relationships could greatly facilitate the NMR chemical shift assignment and structure refinement processes that occur during peptide/protein structure determination via NMR spectroscopy. To determine whether such correlations exist for polar side chain containing amino acid residues the serine dipeptide model, For-L-Ser-NH(2), was studied. Using the GIAO-RHF/6-31+G(d) and GIAO-RHF/TZ2P levels of theory the NMR chemical shifts of all hydrogen ((1)H(N), (1)H(alpha), (1)H(beta1), (1)H(beta2)), carbon ((13)C(alpha), (13)C(beta), (13)C') and nitrogen ((15)N) atoms have been computed for all 44 stable conformers of For-L-Ser-NH(2). An attempt was made to establish correlation between chemical shift of each nucleus and the major conformational variables (omega(0), phi, psi, omega(1), chi,(1) and chi(2)). At both levels of theory a linear correlation can be observed between (1)H(alpha)/phi, (13)C(alpha)/phi, and (13)C(alpha)/psi. These results indicate that the backbone and side-chain structures of For-L-Ser-NH(2) have a strong influence on its chemical shifts.     

Phenolic compounds from the aerial parts of Clematis viticella L. and their in vitro anti-inflammatory activities*

Phytochemical investigations on the EtOH extract of Clematis viticella led to the isolation of six flavonoid glycosides, isoorientin (1), isoorientin 3′-O-methyl ether (2), quercetin 7-O-α-L-rhamnopyranoside (3), quercetin 3,7-di-O-α-L-rhamnopyranoside (4), manghaslin (5) and chrysoeriol 7-O-β-D-glucopyranoside (6), one phenylethanol derivative, hydroxytyrosol (7), along with three phenolic acids, caffeic acid (8), (E)-p-coumaric acid (9) and p-hydroxybenzoic acid (10). The structures of the isolates were elucidated on the basis of NMR and HR-MS data. All compounds were isolated from C. viticella for the first time. Compounds 7 and 8 showed significant anti-inflammatory activity at 100 μM by reducing the release of NO in LPS-stimulated macrophages comparable to positive control indomethacin. Compounds 3 and 7 exhibited anti-inflammatory activity through lowering the levels of TNF-α while 1, 3 and 5 decreased the levels of neopterin better than the positive controls.     

Highly Active Cobalt‐Based Electrocatalysts with Facile Incorporation of Dopants for the Oxygen Evolution Reaction

In situ formation of electroactive cobalt species for the oxygen evolution reaction is simply achieved by applying an anodic bias to a commercially available cobalt precursor and Nafion binder mixture coated on a glassy carbon electrode. This preparation does not require energy‐intensive materials preparation steps or noble metals, yet a low overpotential of 322 mV at 10.2 mA cm^?2 and a high current density of more than 300 mA cm^?2 at 1.7 V_NHE were obtained in 1 m KOH. An operando electrochemical Raman spectroscopy study confirmed the formation of cobalt oxyhydroxide species and the iron stimulated the equilibrium state between Co³⁺ and Co⁴⁺. The iron present in the alkali electrolyte or ink solution effectively activated the cobalt species, and most of the first row transition metals could also enhance the catalytic performance. The concept presented here is one of the simplest strategies for preparing highly active electrocatalysts and is very flexible for the replacement of cobalt by other transition metals.     

Dependency of thermal and electrical conductivity on temperature and composition of Sn in Pb–Sn alloys

The variations of thermal conductivity with temperature for Pb–Sn alloys were measured using a radial heat flow apparatus. The variations of electrical conductivity with the temperature for same alloys were determined from the Wiedemann–Franz law by using the measured values of thermal conductivity. According to present experimental results, the thermal and electrical conductivity of Pb–Sn alloys linearly decrease with increasing temperature but exponentially increase with increasing the composition of Sn. The enthalpy of fusion and the change of specific heat for Pb–Sn alloys were also determined by means of differential scanning calorimeter (DSC) from heating trace during the transformation from eutectic liquid to eutectic solid.     

An Analysis of Low Frequency Discharge in a CH3SiCl3-Ar-H2 Mixture by Optical Emission Spectroscopy and Actinometry

Low frequency (100 kHz) discharge in Ar-H₂ and CH₃SiCl₃-Ar-H₂ mixtures was studied to obtain information on the processes involved in plasma deposition of Si_xC_y:H films from CH₃SiCl₃-Ar-H₂ plasma once the properties of Ar-H₂ plasma are known. The plasmas were studied using optical emission spectroscopy. The addition of small amounts of nitrogen to the plasma mixtures also permitted the use of an actinometry technique. First, plasma parameters (electron density and temperature) and actinometric concentrations of atomic hydrogen in an argon–hydrogen plasma were investigated as a function of the hydrogen content in the feed. Second, the emission intensities of Si, Si⁺, CH, H, Ar and Ar⁺ species produced in the CH₃SiCl₃-Ar-H₂ discharge were analysed as a function of time following the introduction of CH₃SiCl₃ (methyltrichlorosilane, MTCS) to the argon–hydrogen plasmas with various proportions of the feed gasses. The results reveal a rapid decay of the Si-excited state number density versus time, while those of Si⁺ and CH fell off more slowly. The emission of atomic silicon was believed to be a result of electron impact dissociative and excitation processes occurring in the bulk of the discharge, whereas the Si⁺ and CH seemed to originate mainly from products of sputtering of the growing film surface. The fragmentation of the MTCS associated with HCl formation and enhanced atomic hydrogen production as a result of HCl dissociation are proposed. Variations in the radical densities of H and CH₃ were determined using an actinometry technique. The results indicate a significant role for H₂ in gas-phase reactions occurring in the CH₃SiCl₃-Ar-H₂ plasma, as well as in gas-surface interactions, leading to competition between deposition and chemical sputtering of already deposited material.     

Platinum (II) N‐heterocyclic carbene complexes: Synthesis,characterization and cytotoxic properties

Platinum (II) complexes bearing N‐heterocyclic carbene (NHC) ligands have been widely used in catalytic chemistry, but there are very few reports of biological properties of this type of complexes. A series of [PtCl₂(NHC)(PEt₃)] complexes were synthesized. The structures of all compounds were characterized by ¹H‐NMR, ¹³C‐NMR, IR and elemental analysis techniques, which supported the proposed structures. The single crystal structures of complexes 1a and 1e were determined. The title complexes show slightly distorted square‐planar coordination around the platinum (II) metal center. The cytotoxic properties of the platinum (II)–NHC complexes have been assessed in various human cancer lines, including cisplatin‐sensitive and resistant cells. IC₅₀ values of these four complexes were determined by the MTS‐based assay on three human cell lines—brain (SHSY5Y), colon (HTC116) and liver (HEP3B). These complexes have been highlighted cancer therapeutic agent with unique structures and functions.     

Synthesis and Characterization of Aminophosphines,Bis(amino)phosphine Derivatives,and Their Molybdenum(0) Complexes

Functionalized bis(amino)phosphines of the type PhP(NHR)₂ ( 1a–c ) and aminophosphines of the type Ph₂PNHR ( 2a–c ) have been synthesized by treating PhPCl₂ or Ph₂PCl with corresponding primary amines of H₂N-R where R = -CH₂SO₃H, -C₆H₄SO₃H, and benzo-15-crown-5. The molybdenum(0) complex of the aminophosphine ( 3 ) has been obtained by reacting cis-[Mo(CO)₄(bipy)] with aminophosphine ( 2c ). The synthesized aminophosphines, bis(amino)phosphines, and the molybdenum(0) complex have been characterized by IR, ¹H NMR, ³¹P NMR, and MS spectroscopic techniques and by elemental analysis.     

Detection of drug active ingredients by chemometric processing of solid-state NMR spectrometry data -- the case of acetaminophen

This paper presents a preliminary study in building discriminant models from solid-state NMR spectrometry data to detect the presence of acetaminophen in over-the-counter pharmaceutical formulations. The dataset, containing 11 spectra of pure substances and 21 spectra of various formulations, was processed by partial least squares discriminant analysis (PLS-DA). The model found coped with the discrimination, and its quality parameters were acceptable. It was found that standard normal variate preprocessing had almost no influence on unsupervised investigation of the dataset. The influence of variable selection with the uninformative variable elimination by PLS method was studied, reducing the dataset from 7601 variables to around 300 informative variables, but not improving the model performance. The results showed the possibility to construct well-working PLS-DA models from such small datasets without a full experimental design.