Mechanism of hydrogenolysis and isomerization of oxacycloalkanes on metals, XVI. Transformation of tetrahydrofuran on platinum catalysts

The hydrogenolysis of tetrahydrofuran (THF) on TiO₂, SiO₂ and Al₂O₃ supported Pt catalysts has been investigated in the gas phase at 423–623 K in a pulse reactor. The main reactions are hydrodeoxygenation to butane and decarbonylation to propane. The supports had a marked effect on the selectivity of conversion. On the Pt−TiO₂ catalyst mainly butane was formed while on the other two catalysts propane formation was dominant. Based on the results of earlier studies on oxacycloalkanes as well as on data in the literature and the experimental results presented here, a new reaction scheme is outlined for the interpretation of the chemical processes discussed. Part XV.: J. Mol. Catal. (in press)     

Stereochemistry of heterogeneous catalytic reactions. Dehydrogenation and dehydration of stereoisomeric cyclohexanediols on copper

Transformations of six isomeric cyclohexanediols on copper catalysts were studied. The transformation rate sequence is 1,4<1,2<1,3. 1,3-diols selectively yield cyclohexanone (and cyclohexanol). On Cu/Al, 1,2-and 1,4-diols give several products, mainly cyclohexanone and hydroxycyclohexanones. Cn Cu, these latter are formed with much higher selectivity. A correlation was found between the diol stereostructures and reaction directions.

---

Изучены превращения шести изомерных циклогександиолов на медных катализаторах. Скорость превращения изменяется в ряду: 1,4<1,2<1,3. 1,3-диолы селективно преврашаются в циклогексанон (и циклогексанол). На Cu/Al-катализаторе 1,2-и 1,4-диолы образуют различные продукты, в основном циклогексанон и гидрокси-циклогексаноны. На Cu-катализаторе, последные образуются с более высокой селективностьу. Найдена корреляция между стереоструктурой диолов и направлением превращений.

---

---

Part XLI of the series “Study of the transformations of diols and cyclic ethers”     

Hydrogenation ofmethyl 3a-acetoxy-23-oxo-5b-cholan-24-oatecatalyzed by cinchona alkaloid-modified Pt-alumina catalyst

Summary Methyl-3α-acetoxy-23-oxo-5β-cholan-24-oate is hydrogenated with 78% enantioselection at C23 atom over Pt-alumina catalyst modified with cinchona alkaloids, in liquid phase under mild experimental conditions (293-297 K, hydrogen pressure: 1 bar, concentration of modifiers: 0.1 mmol/L, solvent: THF).     

Determination of phenols using simultaneous steam distillation-extraction

Simultaneous distillation-extraction was proposed as a preconcentration step for the determination of phenol and its derivatives in aqueous and soil samples. Detection limits of 0.01 mg l(-1) (water) and 0.1 mg kg(-1) (soil) were achieved by gas chromatography-flame ionization detection. The described preconcentration procedure was applied for the primary study of the adsorption equilibrium in a water-soil system serving as a model of phenol behaviors in the environment.     

Study of CuCl2 Supported on SiO2 and Al2O3

The nature and stability of surface species of CuCl₂ supported on α-Al₂O₃, γ-Al₂O₃, and SiO₂ were investigated by using X-ray diffraction techniques and reflectance spectroscopy. No specific chemical interaction of CuCl₂ is observed on an inert α-Al₂O₃ support, as opposed to hydrated carriers as SiO₂ and γ-Al₂O₃. On these supports the coordination sphere of Cu²⁺ consists of surface groups (OH^? or O^? at drying and activation, resp.), H₂O and Cl^?, with the H₂O ligands decreasing in concentration in the process of impregnation, drying and calcination. γ-Al₂O₃ samples, calcined at 400°C, show γ-Cu₂(OH)₃Cl as opposed to CuAl₂O₄ at higher temperatures. The absence of Cu₂(OH)₃Cl on SiO₂-supported samples is related to the acid-base characteristics of the carriers. The various supports can be arranged in the following order of stability of the complexes formed: γ-Al₂O₃ > SiO₂ ? -Al₂O₃.     

Improved in-gel approaches to generate peptide maps of integral membrane proteins with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

This paper reports studies of in-gel digestion procedures to generate MALDI-MS peptide maps of integral membrane proteins. The methods were developed for the membrane domain of the mannitol permease of E. coli. In-gel digestion of this domain with trypsin, followed by extraction of the peptides from the gel, yields only 44% sequence coverage. Since lysines and arginines are seldomly found in the membrane-spanning regions, complete tryptic cleavage will generate large hydrophobic fragments, many of which are poorly soluble and most likely contribute to the low sequence coverage. Addition of the detergent octyl-beta-glucopyranoside (OBG), at 0.1% concentration, to the extraction solvent increases the total number of peptides detected to at least 85% of the total protein sequence. OBG facilitates the recovery of hydrophobic peptides when they are SpeedVac dried during the extraction procedure. Many of the newly recovered peptides are partial cleavage products. This seems to be advantageous since it generates hydrophobic fragments with a hydrophilic solubilizing part. In-gel CNBr cleavage resulted in 5-10-fold more intense spectra, 83% sequence coverage, fully cleaved fragments and no effect of OBG. In contrast to tryptic cleavage sites, the CNBr cleavage sites are found in transmembrane segments; cleavage at these sites generates smaller hydrophobic fragments, which are more soluble and do not need OBG. With the results of both cleavages, a complete sequence coverage of the membrane domain of the mannitol permease of E. coli is obtained without the necessity of using HPLC separation. The protocols were applied to two other integral membrane proteins, which confirmed the general applicability of CNBr cleavage and the observed effects of OBG in peptide recovery after tryptic digestion.     

Surfactant fouling of nanofiltration membranes: measurements and mechanisms.

Fouling of nanofiltration membranes is studied during filtration of aqueous surfactant solutions under different conditions. To this purpose, four typical nanofiltration membranes (Desal51HL, NF270, NTR7450 and NFPES10) and three typical surfactants (nonionic neodol, anionic SDBS and cationic cetrimide) are selected. Fouling is studied as a function of the surfactant concentration, with and without addition of an electrolyte (NaCl), at different pH and when filtering a mixture of surfactants. Adsorption experiments and hydrophobicity measurements (to study the orientation of the surfactants on the membrane surface) are also performed under the different conditions. The least membrane fouling is found for the anionic surfactant SDBS, while for the cationic surfactant cetrimide very low relative fluxes are observed. Neodol shows an intermediate degree of fouling. Both hydrophobic and electrostatic interactions (in the case of ionic surfactants) between the membrane surface and the surfactant explain the degree of adsorption and hence fouling, as membrane fouling is correlated with the amount of adsorbed surfactant. The difference between cetrimide and SDBS becomes especially visible when changing the pH: increasing the pH leads not only to an opposite orientation of the adsorbed surfactants, but also to an opposite trend in adsorbed amount and membrane fouling. This study permits selection of an optimal nanofiltration membrane to recycle wastewater containing surfactants in the carwash industry. The optimal choice would be a hydrophilic membrane with a low molecular weight cut-off and a small negative surface charge at neutral pH. Cationic surfactants in the wastewater should also be avoided as much as possible.     

Ultrafiltration of surfactant solutions

The ultrafiltration of colloid solutions containing hexadecyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS), and alkylpolyglucoside (APG) through hydrophilic membranes with a 10,000 mol wt cut-off from regenerated cellulose was studied. The effects of experimental conditions on the permeate flux and secondary resistance were determined. It was found that both CTAB and APG were convenient surfactants for ultrafiltration, as high permeability of their solutions was observed. The secondary resistance was always significantly lower than the resistance of the membrane. Additionally, electrolytes had a relatively weak negative effect upon ultrafiltration fluxes. SDS was the least convenient surfactant due to formation of a gel layer, susceptibility of its colloid solutions to electrolyte content, and a high secondary resistance. The concentration of the surfactant in the permeate could increase above critical micelle concentration, especially under conditions inducing high polarization. Migration of CTAB on the surface of pores seemed responsible for that transfer.     

Capillary electrophoresis for detection of inherited disorders of purine and pyrimidine metabolism: a selective approach

We developed a capillary electrophoresis method as a diagnostic tool for purine and pyrimidine metabolic disorders. Optimal conditions allowed the separation of the major diagnostic metabolites in urine samples within an analysis time of 10 min and with a separation efficiency of about 350,000 theoretical plates/m. The diagnostically important metabolites (adenine, adenosine, 2-deoxyadenosine, 2-deoxyguanosine, 2,8-dihydroxyadenine, guanosine, hypoxanthine, orotidine, orotic acid, and creatinine) were detectable at concentrations of 1.0-5.7 micromol/L. The method gives a linear calibration curve for tested purine and pyrimidine derivatives within the range of 5-500 micromol/L (r > 0.996) The coefficients of variation for the within- and between-day imprecisions were less than 3.2 and 5.8%, respectively. Characteristic abnormalities were detected in the electropherograms of urine samples from patients with purine and pyrimidine enzyme deficiencies. We provide electrophoretic and spectral characteristics of intermediates in purine and pyrimidine metabolism and possible artifacts from medication and their UV-absorbing compounds. Our method allows the detection of the majority of inborn errors of purine and pyrimidine metabolism.     

Certification of a second-generation biological reference material (freeze-dried human serum) for trace element determinations

The certification of a second-generation biological reference material (freeze-dried human serum) for trace element determinations is described. The material was prepared under rigorously controlled conditions to avoid extraneous additions. Analytical data were obtained by the authors as well as by numerous other intra- and extra-mural investigators, solicited on the basis of established experience in determining selected elements. For 14 trace elements (aluminium, chromium, manganese, iron, cobalt, copper, zinc, arsenic, selenium, bromine, rubidium, molybdenum, cadmium and caesium) certified values (in ng g^?1 or μg g^?1 dry weight) are listed; for an additional element (nickel) a best estimate (in ng g^? dry weight) is added. Trace element concentrations in the material, which is available to the scientific community, closely approximate those in normal, lyophilized blood plasma or serum samples. The material thus provides the means to check the accuracy and precision of analytical procedures for quantifying low-level trace elements in the best possible conditions and to detect errors that can easily be overlooked when reference materials with higher levels of trace elements are used. In addition, and in contrast to already existing biological reference materials with high levels of trace elements, it offers the possibility of identifying unsuspected errors at the sample preparation stage.