Novel determination of the dimerization mechanism for thermal polymerization of α-methylstyrene

This study discussed the phenomena on thermal polymerization of α-methylstyrene (AMS). A curve scanned by temperature-programmed technique was performed by differential scanning calorimetry (DSC). Heat of polymerization (ΔH) and onset temperature of exothermic (T₀) behavior were determined to be 280±10 J g^-1 and about 138±1°C, respectively. A dimer formation mechanism was proposed for initiation of the propagating chain. Spectroscopic identification of dimer structure was conducted by infrared (IR) spectroscopy in the wavenumber from 650 to 1100 cm^-1associated with molecular fingerprint characteristics. The mechanism of thermal polymerization on α-methylstyrene proposed in this study was similar to that of styrene suggested by Mayo.     

Flammability studies of 3-methyl pyridine/water system

In industrial processes, information on the safety property of chemicals is essentially crucial for safe handling during unit operations. Ensuring the safe use of combustible or flammable substances in processes is unlikely without detailed investigations of their flammability characteristics and related hazards. We studied 3-methyl pyridine (3-picoline), e.g., flammability limits (LFL/UFL), maximum explosion pressure (P _max), maximum explosion pressure rise (dP/dt)_max, minimum oxygen concentration (MOC), vapor deflagration index (K _g), and characterized the influence of inert steam (H₂O) on critical parameters for 3-picoline/water mixtures at 270°C, 1 atm, various oxygen concentrations, and vapor mixing ratios (100/0, 30/70, 10/90 and 5/95 vol.%) with a 20-L-Apparatus in simulated conditions, respectively. The results showed that the flammability characteristics of 3-picoline_(aq) all increased with the oxygen concentration. However, as the composition of inert steam increased, the flammability parameters and the degree of fire and explosion hazards were significantly reduced, instead. This study elucidated the flammability properties of 3-picoline mixed with inert steam. The conclusions could be applied to proactively prevent the relevant processes from incurring fire and explosion accidents.     

聚吡咯水杨酸修饰电极的电化学行为及水杨酸含量测定

本用电化学方法制备了聚吡咯－水杨酸修饰电极；并进行了电化学行为的研究，经电化学处理该是电极对水杨酸根具有选择性响应，响应线性范围在１．０×１０＾－＾５－１．０×１０＾－＾３ｍｏｌ／Ｌ之间。电极斜率为４０ｍＶ／ｐＣ，该电极具有较好的稳定性，响应时间在１８０－３００ｓ之间；电极寿命可达６０ｄ。     

SYNTHESES AND SPECTROSCOPIC PROPERTIES OF LANTHANIDE COMPLEXES, Ln(acac)_3(Ph_3PO)_3

A series of new complexes of formula Ln(acac)_s(Ph_3PO)_3 (where Ln~(3+)=Nd~(3+), Sm~(3+), Eu~(3+), Tb~(3+), Ho~(3+)) have been prepared and characterized. The coordination of two ligands with lanthanide ions are studied by IR spectra, ~1H, ~(13)C, ~(31)P-NMR and metal-ligand charge tranafer tranaition is also discussed via electronic adaorption and luminescence spectroscopy.     

Solar Photocatalytic Degradation of 4‐Chlorophenol in Kaolinite Catalysts

This research applies semiconductor photocatalysts, which are formed by metal ion exchange on the surface of kaolinite catalyst with cations, to the study of photocatalytic degradation of 4‐chlorophenol. The analysis results of catalyst properties shows that, after sintering at 400 °C, kaolinite catalyst has a particle size of between 10–100 nm indicating the nano level of synthesized catalysts. Under the same condition, kaolinite‐Ag/Zn catalyst works better in degradation efficiency than single kaolinite‐Ag and kaolinite‐Zn catalysts. Kaolinite‐Zn catalyst declines in degradation efficacy after 150 minutes and performs poorer than the other three types of kaolinite catalysts. In the experiments of different amounts of catalysts, when the concentration exceeds 0.1 wt%, utilization of light energy and degradation efficiency will be reduced due to shielding effect. When at different pH values, the higher the pH value, the more OH‐will be released and that is beneficial for reaction with substances and the increase of reaction rate. Finally multivariate analysis proves that there is one determining factor that influences the photocatalytic degradation of 4‐chlorophenol in kaolinite catalysts, named as “the factor with intermediates competition degree,” the one affecting the 4‐CP degradation at different weight percentages that is referred to as the “shielding effect factor.”     

alpha-Aminoallylation of aldehydes with ammonia: stereoselective synthesis of homoallylic primary amines

Three-component reactions of aldehydes, ammonia, and allylboronates were found to provide homoallylic primary amines in high yields with high chemo- and stereoselectivities. A two-step, one-pot, stereoselective synthesis of an uncommon alpha-amino acid, alloisoleucine, was achieved utilizing this reaction.     

Interaction between Metal in Metallo Enzyme and Small Biological Molecules

ＩｎｔｅｒａｃｔｉｏｎｂｅｔｗｅｅｎＭｅｔａｌｉｎＭｅｔａｌｌｏＥｎｚｙｍｅａｎｄＳｍａｌｌＢｉｏｌｏｇｉｃａｌＭｏｌｅｃｕｌｅｓ￥ＨｕＪｉｅ－Ｈａｎ；ＳｈｕＺａｎ－Ｙｏｎｇ；ＴａｏＬｉ－Ｍｅｉ；ＣｈｅｎｇＧｕｏ－Ｂａｏ（ＤａｌｉａｎＩｎｓｔｉｔｕｔ...     

脱氧核糖核酸在汞膜电极上的电化学行为

首次在汞膜电极上利用循环安，微分脉冲和交流伏安法研究脱氧核糖核酸（ＤＮＡ）的电化学行为，结果表明汞膜电极作为一类固体电极可应用于负电位区ＤＮＡ电化学行为的研究。同时结合凝胶电泳和ＵＶ光谱法，研究了用纯高氯酸处理的ＤＮＡ的氧化还原特性，结果表明纯高氯酸可经起ＤＮＡ的变性和降解，纯高氯酸不适宜ＤＮＡ的变性处理。     

丙酮一步法合成甲基异丁基酮催化剂研究

用浸渍法制备了丙酮一步法合成甲基异丁基酮负载型催化剂，考察了载体的预处理温度、添加镧助剂对催化剂性能的影响；用BET法测定了催化剂的表面积；采用H2-O2滴定法测定Pd的分散度．结果发现，用经过1．023K焙烧过的Al2O3为载体的催化剂具有较好的催化性能，添加镧助剂后催化剂的分散度、活性有较大的提高．     

丙烯环氧化反应的高活性钼催化剂

在钼(Ⅵ),钒(Ⅴ)和钛(Ⅳ)等化合物存在下,丙烯与烷基过氧化氢的环氧化反应比传统的氯醇法有很多优点,其中以钼催化剂的性能最优,但目前报道的催化剂在反应过程中因易分解而降低了活性,并且丙烯与烷基过氧化氢的投料比过大(>3:1),丙烯循环次数过多。前文报道了钼烷基醇胺化合物对环已烯的环氧化反应,本文考察了钼烷基醇胺化合物对丙烯与叔丁基过氧化氢环氧化反应的催化性能。