Determination of solubility parameters of cross-linked macromonomeric initiators based on polypropylene glycol

A new type macromonomeric azo initiators also named macroinimers, MIMs, based on polypropylene glycol, PPG, with molecular weight 400 and 2000, were synthesized. Self-condensing radical polymerization of the macroinimers gave cross-linked polypropylene glycols. The solubility parameters of the cross-linked polymers determined using swelling experiments in a series of solvents have been reported. Crosss-linked PPG-400 and cross-linked PPG-2000 indicated the same solubility parameter value. But their swelling ratios were different because of the differences of the chain lengths in between of the cross-points (Mc) of the gels. Therefore, while the largest swelling ratio exhibited by a cross-linked PPG-2000 in tetrahydrofurane was being 19.48, this ratio was 6.84 for the cross-linked PPG-400 in the same solvent. The solubility parameters and constant α for these cross-linked polymers were obtained as δ_{cross-linked PPG-400} = 9.56 (cal cm⁻³)^1/2, α = 0.123 cm³ cal⁻¹ and δ_{cross-linked PPG-2000} = 8.95 (cal cm⁻³)^1/2, α = 0.107 cm³ cal⁻¹ by using the least squares regression method.     

The efficiency of direct integration methods in elastic contact-impact problems

A comparison of direct integration methods is made and their efficiency is investigated for impact problems. Newmark, Wilson–θ, Central Difference and Houbolt Methods are used as direct integration methods. Impact analysis includes that of elastic and large deformation based upon updated Lagrangian including buckling check. The results show that the direct integration methods give different results in different contact-impact cases.The English text was polished by Keren Wang     

Barrier characteristics of biopolymer-based organic/inorganic Au/CTS/n-InP hybrid junctions

Thin film of biopolymeric compound chitosan (CTS) has been surfaced on moderately doped n-InP substrate as an interfacial layer by means of spin coating for the electronic modification of Au/n-InP structure. Electrical characterization of Au/CTS/n-InP hybrid junction has been performed by I–V and C–V measurements at room temperature. An effective barrier height (BH) value of 0.678 eV and an ideality factor of n = 1.665 have been obtained for the hybrid junction. The CTS interfacial layer has been found to reduce the reverse bias leakage current of the junction by about three orders of magnitude and enhance the BH by about 0.213 eV. Furthermore, the BH value of the hybrid junction has been obtained as 0.693 eV by C–V measurement. Good performance of the device could be ascribed to the passivation effect of the CTS interfacial layer between Au and n-InP. The BH values of 0.678 and 0.693 eV for the hybrid junction have been significantly higher than that of the conventional Au/n-InP junction (~0.465 eV). The results indicated that biopolymeric thin interfacial CTS layer might lead to the modification of the potential barrier for metal/n-InP junctions. Moreover, band gap of the CTS layer has been determined as 4.60 eV via UV–vis spectroscopy.     

Synthesis and characterization of new (N‐diphenylphosphino)‐isopropylanilines and their complexes: crystal structure of (Ph2P S)NH?C6H4?4?CH(CH3)2 and catalytic activity of palladium(II) complexes in the Heck and Suzuki cross‐coupling reactions

Three new (N‐diphenylphosphino)‐isopropylanilines, having isopropyl substituent at the carbon 2‐ (1) 4‐ (2) or 2,6‐ (3) were prepared from the aminolysis of chlorodiphenylphosphine with 2‐isopropylaniline, 4‐isopropylaniline or 2,6‐diisopropylaniline, respectively, under anaerobic conditions. Oxidation of 1,2 and 3 with aqueous hydrogen peroxide, elemental sulfur or gray selenium gave the corresponding oxides, sulfides and selenides (Ph₂P?E)NH? C₆H₄? 2‐CH(CH₃)₂, (Ph₂P?E)NH? C₆H₄? 4‐CH(CH₃)₂ and (Ph₂P?E)NH? C₆H₄? 2,6‐{CH(CH₃)₂}₂, where E = O, S, or Se, respectively. The reaction of [M(cod)Cl₂] (M = Pd, Pt; cod = 1,5‐cyclooctadiene) with two equivalents of 1,2 or 3 yields the corresponding monodendate complexes [M((Ph₂P)NH? C₆H₄? 2‐CH(CH₃)₂)₂Cl₂], M = Pd 1d, M = Pt 1e, [M((Ph₂P)NH? C₆H₄? 4‐CH(CH₃)₂)₂Cl₂], M = Pd 2d, M = Pt 2e and [M((Ph₂P)NH? C₆H₄? 2,6‐(CH(CH₃)₂)₂)₂Cl₂], M = Pd 3d, M = Pt 3e, respectively. All the compounds were isolated as analytically pure substances and characterized by NMR, IR spectroscopy and elemental analysis. Furthermore, representative solid‐state structure of [(Ph₂P?S)NH? C₆H₄? 4‐CH(CH₃)₂] (2b) was determined using single crystal X‐ray diffraction technique. The complexes 1d–3d were tested and found to be highly active catalysts in the Suzuki coupling and Heck reaction, affording biphenyls and stilbenes, respectively. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of new boron complexes: application to transfer hydrogenation of acetophenone derivatives

Two new boron complexes were synthesized from N‐[3‐(methylmercapto)aniline]‐3,5‐di‐tert‐butylsalicylaldimine ( LH ) with boron reagent BPh₃ or BF₃.Et₂O. These boron complexes are stable and easily soluble in protic solvents such as ethanol (C₂H₅OH) but hardly soluble in nonprotic solvents such as chloroform (CHCl₃), dichloromethane (CH₂Cl₂) and tetrahydrofuran (THF). All new boron complexes have been fully characterized by both analytical and spectroscopic methods. The catalytic activities of complexes [LBPh₂], 2 , and [LBF₂], 3 , in the transfer hydrogenation of acetophenone derivatives were tested. Stable boron complexes were found to be efficient catalysts in the transfer hydrogenation of aromatic ketones in good conversions up to 99% in the presence of iso‐PrOH/KOH. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis and characterizations of N,N-bis(diphenylphosphino)ethylaniline derivatives and X-ray crystal structure of palladium (II), platinum (II) complexes

N,N-Bis(diphenylphosphino)ethylaniline compounds, [Ph₂P]₂N-C₆H₄-C₂H₅, with ethyl groups at the ortho- and para-positions have been synthesized. Oxidation of the aminophosphines with hydrogen peroxide, elemental sulfur and selenium gave the corresponding oxides, sulfides and selenides [Ph₂P(E)]₂N-C₆H₄-C₂H₅ (E = O, S, Se). Complexes [MCl₂{(Ph₂P)₂N-C₆H₄-(C₂H₅)}] (M = Pd, Pt) and [Cu{(Ph₂P)₂N-C₆H₄-C₂H₅}₂]PF₆ were obtained by the reaction of N,N-bis(diphenylphosphino)ethylaniline with [MCl₂(COD)] (M = Pd, Pt) and [Cu(MeCN)₄]PF₆. The new compounds were characterized by NMR, IR spectroscopy and microanalysis. In addition, representative solid-state structures of the palladium and platinum complexes were determined using single crystal X-ray diffraction analyses.     

Cyclic codes over <Emphasis Type="Italic">R</Emphasis><Subscript><Emphasis Type="Italic">k</Emphasis></Subscript>

Cyclic codes over an infinite family of rings are defined. The general properties of cyclic codes over these rings are studied, in particular nontrivial one-generator cyclic codes are characterized. It is also proved that the binary images of cyclic codes over these rings under the natural Gray map are binary quasi-cyclic codes of index 2 ^k . Further, several optimal or near optimal binary codes are obtained from cyclic codes over R _k via this map.     

New active ruthenium(II) complexes based N3,N3′-bis(diphenylphosphino)-2,2′-bipyridine-3,3′-diamine and P,P′-diphenylphosphinous acid-P,P′-[2,2′-bipyridine]-3,3′-diyl ester ligands for transfer hydrogenation of aromatic ketones by propan-2-ol

The dimeric starting material [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂ reacts with N3,N3′-bis(diphenylphosphino)-2,2′-bipyridine-3,3′-diamine, 1 and P,P′-diphenylphosphinous acid-P,P′-[2,2′-bipyridine]-3,3′-diyl ester, 2 ligands to afford bridged dinuclear complexes [C₁₀H₆N₂{NHPPh₂-Ru(η⁶-p-cymene)Cl₂}₂], 3 and [C₁₀H₆N₂{OPPh₂-Ru(η⁶-p-cymene)Cl₂}₂], 4 in quantitative yields. These bis(aminophosphine) and bis(phosphinite) based Ru(II) complexes serve as active catalyst precursors for the transfer hydrogenation of acetophenone derivatives in 2-propanol and especially 4 acts as a good catalyst, giving the corresponding alcohols in 99% yield in 20 min (TOF ? 280 h⁻¹).     

Synthesis,Characterization, Crystal and Molecular Structure of 1,5‐Dihydro‐2H‐cyclopenta[1,2‐b:5,4‐b′]dipyridin‐2‐imine

The reaction of 1,5‐dihydro‐2H‐cyclopenta[1,2‐b:5,4‐b′]dipyridin‐2‐one ( 3 ) with an alkylamine (butylamine, hexylamine or ethylenediamine) yields, quite unexpectedly and in the absence of catalyst, the novel compound 1,5‐dihydro‐2H‐cyclopenta[1,2‐b:5,4‐b′]dipyridin‐2‐imine ( 4 ) as the sole, analytically pure, solid product, which was fully characterized. The structure of 4 was unequivocally solved by single‐crystal X‐ray‐diffraction analysis. The compound crystallizes in a monoclinic cell (space group P 2₁/c), with two molecules in the asymmetric unit, held together by intermolecular H‐bonds. Compound 4 could be interesting as a bi‐ or even tridentate ligand, and exhibits a strong fluorescence upon excitation at 310 nm. A mechanism, based on the observed C? N bond cleavage, is proposed.