Nano-size amorphous calcium-manganese oxide as an efficient and biomimetic water oxidizing catalyst for artificial photosynthesis: back to manganese

A nano-size amorphous calcium-manganese oxide shows efficient water oxidation activity in the presence of cerium(IV) ammonium nitrate.     

On the chlorenium source in the asymmetric chlorolactonization reaction

N-Acylated N-chlorohydantoins are shown to be competent chlorenium sources in the (DHQD)(2)PHAL-mediated asymmetric chlorolactonization. The derivatives demonstrate the exact role of the N1 and N3 chlorine atoms in the parent dichlorohydantoins with the N1 chlorine serving as an inductive activator and the N3 chlorine being delivered to the substrate. The putative associated catalyst/chlorine source complex was experimentally demonstrated through a series of matched/mismatched experiments employing chiral N-chlorinated hydantoins.     

An atomic gravitational wave interferometric sensor in low earth orbit (AGIS-LEO)

We propose an atom interferometer gravitational wave detector in low Earth orbit (AGIS-LEO). Gravitational waves can be observed by comparing a pair of atom interferometers separated by a 30 km baseline. In the proposed configuration, one or three of these interferometer pairs are simultaneously operated through the use of two or three satellites in formation flight. The three satellite configuration allows for the increased suppression of multiple noise sources and for the detection of stochastic gravitational wave signals. The mission will offer a strain sensitivity of ${<10^{-18}/\sqrt{{\rm Hz}}}$ in the 50mHz?C10Hz frequency range, providing access to a rich scientific region with substantial discovery potential. This band is not currently addressed with the LIGO, VIRGO, or LISA instruments. We analyze systematic backgrounds that are relevant to the mission and discuss how they can be mitigated at the required levels. Some of these effects do not appear to have been considered previously in the context of atom interferometry, and we therefore expect that our analysis will be broadly relevant to atom interferometric precision measurements. Finally, we present a brief conceptual overview of shorter-baseline $({\lesssim100\,{\rm m}})$ atom interferometer configurations that could be deployed as proof-of-principle instruments on the International Space Station (AGIS-ISS) or an independent satellite.     

Array of planar plasmonic scatterers functioning as light concentrator

In this Letter, the concept of transmit array antenna enabling light concentration in the near-IR region is explored. As for the elements of the transmit array, concentric loop scatterers are chosen due to their design flexibility and potential for providing high phase variation by changing the dimensions of the loops. Periodic behaviors of the concentric loop elements are obtained by means of the finite-difference time-domain method. Using these results, a transmit array configuration is designed, and a focused beam at a desired distance is achieved. To model the electromagnetic fields of the finite array, the field equivalence principle and proper dyadic Green's functions are applied.     

Mesoporous titania photocatalyst: effect of relative humidity and aging on the preparation of mesoporous titania and on its photocatalytic activity performance

Mesoporous TiO₂ has been synthesized by the sol–gel method, using a nonionic triblock copolymer P123 as surfactant template under acidic conditions. The as-prepared samples were characterized by thermogravimetry–differential thermal analysis (TG–DTA), nitrogen absorption–desorption (BET), field emission scanning electron microscopy, and transmission electron microscopy. The photocatalytic activity of the mesoporous TiO₂ was evaluated by degradation of methylene blue under high-intensity UV light irradiation; the amount of methylene blue was measured by UV–visible spectroscopy. TG–DTA analysis revealed that the surfactant had been removed partly in as-synthesized samples. BET analysis proved that all the samples retained mesoporosity with a narrow pore-size distribution (4.5–6.3 nm) and high surface area (103–200 m²/g). All calcined mesoporous TiO₂ had high photocatalytic activity in the photodegradation of methylene blue.     

Triethylphosphate/Phosphorus Pentoxide as an Efficient Reagent for the Phosphorylation of Phenols

Abstract

A simple, efficient, and novel method has been developed for the phosphorylation of phenols. Treatment of phenols with a mixture of triethylphosphate/phosphorus pentoxide gives the corresponding phosphate derivatives in good yields. This method is easy, rapid, and offers good yields for the phosphorylation of phenols. The reaction of triethylphosphate with phosphorus pentoxide was also studied by variable-temperature ³¹P-NMR spectroscopy.     

Nonlinear finite element model updating of an infilled frame based on identified time-varying modal parameters during an earthquake

A model updating methodology is proposed for calibration of nonlinear finite element (FE) models simulating the behavior of real-world complex civil structures subjected to seismic excitations. In the proposed methodology, parameters of hysteretic material models assigned to elements (or substructures) of a nonlinear FE model are updated by minimizing an objective function. The objective function used in this study is the misfit between the experimentally identified time-varying modal parameters of the structure and those of the FE model at selected time instances along the response time history. The time-varying modal parameters are estimated using the deterministic–stochastic subspace identification method which is an input–output system identification approach. The performance of the proposed updating method is evaluated through numerical and experimental applications on a large-scale three-story reinforced concrete frame with masonry infills. The test structure was subjected to seismic base excitations of increasing amplitude at a large outdoor shake-table. A nonlinear FE model of the test structure has been calibrated to match the time-varying modal parameters of the test structure identified from measured data during a seismic base excitation. The accuracy of the proposed nonlinear FE model updating procedure is quantified in numerical and experimental applications using different error metrics. The calibrated models predict the exact simulated response very accurately in the numerical application, while the updated models match the measured response reasonably well in the experimental application.     

Electrochemical Behavior of Glucose Oxidase Immobilized on Pd‐Nanoparticles Decorated Ionic Liquid Derived Fibrillated Mesoporous Carbon

Pd nanoparticles with an average diameter of 5 nm were decorated on the surface of ionic liquid derived fibrillated mesoporous carbon (IFMC) to prepare a novel nano‐hybrid material (Pd@IFMC). Thereafter, glucose oxidase was immobilized on Pd@IFMC modified glassy carbon electrode to fabricate an enzymatic glucose biosensor. A pair of well‐defined redox peaks was recorded for direct electron transfer of the immobilized glucose oxidase at the formal potential of ? 0.418 V with a peak to peak separation of 25 mV. Electron transfer rate constant of was calculated to be 14.6 s^?1. The response of fabricated biosensor was linear towards glucose concentration.