一种便携快速测量水中铅和镉含量的仪器-ANDalyze

快速测量污染水中重金属元素含量对于监测野外突发污染至关重要.建立了使用以生物酶（DNA酶）为原理的便捷仪器快速测定污染水中铅（Pb）和镉（Cd）元素含量的方法.使用生物酶传感器对标准溶液进行测量,根据溶液推荐和测量浓度之间的线性关系对仪器进行校准后,可测量的质量浓度范围:Pb为2~100 μg/L,Cd为0.1~1.0 mg/L.仪器可以在3~5 min内方便快速完成重金属的现场测量,使用DNA酶可以快速获得污染水中的微量金属元素含量,有利于野外重金属污染的即时测量.     

Tuning the mechanical properties and degradation properties of polydioxanone isothermal annealing

Polydioxanone (PPDO) is synthesized by ring-opening polymerization of p-dioxanone, using stannous octoate as the catalyst. The polarized optical micrograph (POM) shows thes pherulite growth rate of PPDO decreases with an increase in the isothermal crystallization temperature. PPDO is compression-molded into bars, and PPDO bars are subjected to isothermal annealing at a range of temperatures (Ta = 50, 60, 70, 80, 90, and 100 °C), and correspond to three different annealing times (ta = 1h, 2h, 3h). The effect on PPDO is investigated by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and scanning electron microscopy (SEM). With an increase in Ta and ta, the grain size and the degree of crystallinity also increase. Meanwhile, the tensile strength is significantly improved. The PPDO bars (90 °C, 2 h) reach the maximum crystallinity (57.21%) and the maximum tensile strength (41.1 MPa). Interestingly, the heat treatment process does not result in serious thermal degradation. It is observed that the hydrolytic degradation of the annealed PPDO is delayed to some extent. Thus, annealed PPDO might have potential applications, particularly in the fields of orthopedic fixation and tissue engineering.     

有机阴离子柱撑水滑石催化酯交换合成碳酸二苯酯

 A series of organic anion-pillared hydrotalcites were synthesized by the ion exchange method and characterized by X-ray diffraction and Fourier transform infrared spectroscopy. The hydrotalcite precursor and pillared hydrotalcites with different anions was tested as catalysts in transesterification of dimethyl carbonate (DMC) with phenol. The results show that the catalytic selectivity of this transesterification reaction over these organic anion-pillared hydrotalcites is significantly improved. The catalytic selectivities of C4H4O4-, C6H8O4-, C10H16O4-, 1,4-C8H4O4-, and C7H5O2-pillared hydrotalcites for transesterified products (diphenyl carbonate and methyl phenyl carbonate) are all greater than 90%, at least 10% higher than that of the hydrotalcite precursor. Under the conditions of n(phenol)/n(DMC)=4, catalyst amount=1.5%, and t=10 h, the C6H8O4-pillared hydrotalcite presents the best catalytic performance, and the DMC conversion and the selectivity for transesterified products reach 43.8% and 93.2%, respectively.     

高静水压诱导水稻产生突变的研究

 以78 MPa高静水压力处理已浸泡10 h的水稻（Oryza sativa L.）粤香占、粤丰占和测64种子12 h,成苗后移栽至大田,对其处理当代和后代的农艺性状进行调查和分析,结果表明,处理当代中,粤香占、粤丰占和测64的穗粒数分别增加了5.2%、1.2%和17.0%,且测64达到显著性差异水平;测64处理的生育期延长10 d,而粤香占和粤丰占则分别早熟5 d和2 d 。在处理的当代和后代中出现了可遗传的突变体,突变性状中既有质量性状也有数量性状,其中紫色叶鞘和穗下节伸长属于质量性状突变,株高、粒长和穗粒数等属于数量性状突变。突变频率因品种不同而存在差异,表现为：测64>粤丰占>粤香占。通过4年6代的筛选,共获得近100份包括叶、茎、穗、粒、育性和生育期等性状发生明显变异的突变体,已稳定的突变株系22个,其中7个突变株系的综合性状明显较对照好,具有良好的应用前景。     

基于(C-H)+…X-氢键作用的阴离子识别与传感的研究进展

对基于(C—H)+…X-氢键类型的阴离子识别以及识别过程所引起的光化学传感和电化学传感的研究进展进行了评述.     

反胶束法制备直接甲醇燃料电池Pt-Sn/C催化剂及其表征

在水/AOT/环己烷反胶束体系中, 制备了Pt-Sn/C催化剂, 研究了不同ω (反胶束溶液中水与表面活性剂的物质量之比)值对Pt-Sn粒径的影响. 并采用TEM, XRD, XPS, 循环伏安等技术对其进行表征. TEM结果表明合成的Pt-Sn纳米颗粒为球形, 在碳载体表面均匀分布, 粒径分布窄, 平均粒径为2.7 nm. Pt-Sn颗粒尺寸随着ω的增加而增大. XRD结果表明该催化剂中Pt具有面心立方结构且没有与Sn形成合金. XPS结果表明在该催化剂中, Pt主要以零价态存在. 在甲醇溶液中的循环伏安扫描结果表明, 甲醇氧化峰电位和峰电流随着ω的增加而减小, 说明反胶束方法可以通过控制颗粒尺寸, 从而影响催化剂的电氧化活性. 相对于商用Pt-Ru/Vulcan XC-72 (20 wt%, E-TEK公司), 该催化剂具有较低的峰电势以及较高的I_f/I_b (循环伏安曲线中正向扫描峰电流与反向扫描峰电流的比值), 这表明用此方法制备的Pt-Sn/C催化剂具有较好的抗中毒能力.     

旋转状态半受限冲射流流动和换热特性研究

利用数值模拟的方法,通过改变冲击雷诺数Rej(20000-35000)、旋转数Ro(0-0．0117)等参数,分析旋转条件下半受限单孔冲击射流的流动和换热特性,讨论了旋转对冲击射流的流场结构和换热特性的影响．研究结果表明:冲击射流在离心力和哥氏力的共同作用下发生弯曲,造成冲击靶面上的冲击斑随着旋转数Ro的增加而不断偏移,显著影响了冲击的冷却效果．冲击靶面的平均Nu数随着冲击雷诺数Rej的增加而增加;当旋转数Ro增加时,冲击靶面的平均Nu数先增加,后减小,然后再增加．计算结果和试验结论基本一致．     

环糊精对(R)、(S)-2-丁醇手性分子识别的电喷雾电离质谱研究

电喷雾质谱(ESIMS)是一种极弱的离子化过程,它不仅能在不断裂共价键情况下使分子离子化,而且可以在离子化过程保持分子间的弱相互作用(非共价键作用),因此ESIMS在超分子领域已有不少报道[1-3]。分子手性识别对分析科学家、生物医药科学家而言是一项既具挑战性又十分重要的问题,     

Electrospray Ionization Mass Spectra of Amino Acid Methyl Ester 5′-Phosphoramidates of 2′,3′-Isopropylideneuridine

Amino acid methyl ester phosphates were synthesized and determined by using positive-ion mode electrospray ionization mass spectrometry(ESIMS) in combination with multistage tandem mass spectrometry. The fragmentation pathways were investigated, and it was observed that most fragment ions contained the phosphoryl group. It was interesting to observe that the fragmentation pathways of the protonated molecule show some differences when compared with those of the sodium ion adduct. The methoxy group of amino acid methyl ester can migrate from the carbonyl group to the phosphoryl group in the sodium ion adduct.     

NaGd(WO 4)2∶Yb^3+,Ho^3+,Cr^3+微米晶的上转换发光与温度特性

采用水热法制备了NaGd(WO4)2(NGW)∶Yb^3+,Ho^3+,Cr^3+微米晶。研究了Cr^3+离子掺杂浓度对样品的晶体结构、微观形貌、上转换发光及温度传感特性的影响。在980 nm激光激发下,所有样品均发射以546 nm为中心的较弱绿光和以660 nm为中心的强红光,分别对应于Ho^3+离子的5F4,5S2→5I8和5F5→5I8能级跃迁。随Cr^3+离子掺杂量增加,绿光发射峰强度逐渐减弱,而红光发射先增大后减小,在10%时达到最大,样品色坐标逐渐向红色区域偏移。样品的变温光谱表明,NGW∶Yb^3+,Ho^3+,10%Cr^3+微米晶具有很好的温度特性,其测温灵敏度在486 K时达到最大,约为0.0337 K^-1,比NGW∶Yb^3+,Ho^3+的灵敏度提高近1倍。