Nano-enabled microtechnology: polysulfone nanocomposites incorporating cellulose nanocrystals

Microchannel devices hold the potential to transform many separation processes. This preliminary study investigated the feasibility of incorporating cellulose nanocrystals (CNXLs) into polysulfone, a commonly used ultrafiltration membrane polymer. Incorporating CNXLs into non-water soluble polymers without aggregation has been problematic. A solvent exchange process was developed that successfully transferred an aqueous CNXL dispersion into the organic solvent N-methylpyrrolidone (NMP), which is a solvent for polysulfone (PSf). Films were prepared from the solution of PSf in NMP with dispersed CNXLs by a phase inversion process. Films were then examined by scanning electron microscopy and tested for their transport and mechanical properties. The interaction between the polymer matrix and the CNXL filler was studied by means of thermogravimetric analysis (TGA), which suggested a close interaction between the polymer and filler at the 2% filler loading. The tensile modulus showed a large increase beyond 1% filler loading, which could be due to a percolation effect. The water vapor transport rate increased with increase in filler loading. Agglomeration of the CNXLs seemed to be taking place at filler loadings >7%.     

Applications of ion-exchange minicolumns in a flow-injection system for the spectrophotometric determination of anions

Displacement of thiocyanate from a strongly basic ion-exchange resin by other anions is used to determine common anions at the 10^?5–10^?4 M level by spectrophotometric detection of the iron(III)/thiocyanate complex. Chloride and sulphate can be removed by incorporating a pre-column containing a cation-exchange resin in the silver form followed by a zinc reductor, thus allowing the determination of nitrate in their presence. Binary mixtures (e.g., chloride and nitrate) can be determined simultaneously by splitting the sample in the flow system so that part goes through the chloride suppressor (giving a nitrate response only) and part by-passes it giving a response to both chloride and nitrate.     

On-column synthesis coupled to affinity capillary electrophoresis for the determination of binding constants of peptides to glycopeptide antibiotics

Binding constants of the glycopeptide antibiotics teicoplanin (Teic), ristocetin (Rist), and vancomycin (Van), and their derivatives to D-Ala-D-Ala terminus peptides were determined by on-column ligand and receptor synthesis coupled to affinity capillary electrophoresis (ACE) or partial filling ACE (PFACE). In the first technique, 9-fluorenylmethoxycarbonyl (Fmoc)-amino acid-D-Ala-D-Ala species are first synthesized using on-column techniques. The initial sample plug contains a D-Ala-D-Ala terminus peptide and two non-interacting standards. Plugs two and three contain solutions of Fmoc-amino acid-N-hydroxysuccinimide (NHS) ester and buffer, respectively. Upon electrophoresis, the initial D-Ala-D-Ala peptide reacts with the Fmoc-amino acid NHS ester yielding the Fmoc-amino acid D-Ala-D-Ala peptide. Continued electrophoresis results in the overlap of the glycopeptide in the running buffer and the plug of Fmoc-amino acid-D-Ala-D-Ala peptide and non-interacting markers. Subsequent analysis of the change in the electrophoretic mobility (mu) or relative migration time ratio (RMTR) of the peptide relative to the non-interacting standards, as a function of the concentration of the antibiotic, yields a value for the binding constant. In the second technique, derivatives of the glycopeptides Teic and Rist are first synthesized on-column before analysis by ACE or PFACE. After the column has been partially filled with increasing concentrations of D-Ala-D-Ala terminus peptides, a plug of buffer followed by two separate plugs of reagents are injected. The order of the reagent plugs containing the antibiotic and two non-interacting standards and the anhydride varies with the charge of the glycopeptide. Upon electrophoresis, the antibiotic reacts with the anhydride yielding a derivative of Teic or Rist. Continued electrophoresis results in the overlap of the derivatized antibiotic and the plug of D-Ala-D-Ala peptide. Analysis of the change in RMTR of the new glycopeptide relative to the non-interacting standards, as a function of the concentration of the D-Ala-D-Ala ligand yields a value for the binding constant.     

Oxidation of bisnaphthols to spironaphthalenones,revisited

Bis(2‐hydroxy‐1‐naphthyl)methane derivatives have been efficiently converted to their corresponding spirans through three methods, i.e. oxidation by TCCA under mild reaction conditions, Ph₃Bi catalyzed air oxidation, and by electrochemical reaction. The first two methods are diastereoselective and give either of the two possible diastereomers, while the electrochemical method produces equal amounts of these diastereomers.     

The effect of gelatin as a chelating agent on the synthesis and characterization of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> nanopowders prepared via sol–gel method

In this research, LiMn₂O₄ nanopowders were synthesized by the sol–gel method using gelatin as a chelating agent. Three categories of samples with various weight ratios of gelatin to the final product, 1:1, 2:1, and 3:1, have been synthesized. The produced gel was dried in a controllable oven with a slow slope up to 250??C and calcined at different temperatures. The results show that the amount of gelatin affects the structural properties such as the formation temperature of the spinel structure, the homogeneity of the size distribution and size of the particles. The sample with the weight ratio of 3:1 of gelatin to the final product has a lower temperature for the formation of LiMn₂O₄ with more homogeneity, and smaller particles with the average size of 70?nm, which is calcined at 750??C, while the samples with the weight ratios 2:1 and 1:1 have the average particle sizes of 75 and 89?nm, respectively.

Open image in new window

     

Ergodicity and weak-mixing of homogeneous extensions of measure-preserving transformations with applications to Markov shifts

Given a homogeneous extensionS of a measure-preserving transformationT, we provide necessary and sufficient conditions for the ergodicity and weak-mixing ofS in terms of functional equations. We then apply our findings to the case whenT is a Markov shift and the associated skewing function ofS depends on a finite number of coordinates. In this case, we obtain a simplification to the appropriate functional equations.     

Modified homotopy analysis method for solving systems of second-order BVPs

In this paper, a new modification of the homotopy analysis method (HAM) is presented for solving systems of second-order boundary-value problems (BVPs). The main advantage of the modified HAM (MHAM) is that one can avoid the uncontrollability problems of the nonzero endpoint conditions encountered in the standard HAM. Numerical comparisons show that the MHAM is more efficient than the standard HAM.     

Strategies for protecting supply chain networks against facility and transportation disruptions: an improved Benders decomposition approach

Disruptions rarely occur in supply chains, but their negative financial and technical impacts make the recovery process very slow. In this paper, we propose a capacitated supply chain network design (SCND) model under random disruptions both in facility and transportation, which seeks to determine the optimal location and types of distribution centers (DC) and also the best plan to assign customers to each opened DC. Unlike other studies in the extent literature, we use new concepts of reliability to model the strategic behavior of DCs and customers at the network: (1) Failure of DCs might be partial, i.e. a disrupted DC might still be able to serve with a portion of its initial capacity (2) The lost capacity of a disrupted DC shall be provided from a non-disrupted one and (3) The lost capacity fraction of a disrupted DC depends on its initial investment amount in the design phase. In order to solve the proposed model optimally, a modified version of Benders’ Decomposition (BD) is applied. This modification tackles the difficulties of the BD’s master problem (MP), which ultimately improves the solution time of BD significantly. The classical BD approach results in low density cuts in some cases, Covering Cut Bundle (CCB) generation addresses this issue by generating a bundle of cuts instead of a single cut, which could cover more decision variables of the MP. Our inspiration to improve the CCB generation led to a new method, namely Maximum Density Cut (MDC) generation. MDC is based on the observation that in some cases CCB generation is cumbersome to solve in order to cover all decision variables of the MP rather than to cover part of them. Thus the MDC method generates a cut to cover the remaining decision variables which are not covered by CCB. Numerical experiments demonstrate the practicability of the proposed model to be promising in the SCND area, also the modified BD approach decreases the number of BD iterations and improves the CPU times, significantly.     

Preparation of single‐walled carbon nanotubes‐induced poly(p‐oxybenzoyl) crystals

Crystallization of oligomers was applied for the preparation of single‐walled carbon nanotubes (SWNTs)/poly(p‐oxybenzoyl) (POB) crystals using SWNTs as a nucleating agent. Polymerization conditions were investigated to induce the crystallization of POB oligomers through SWNTs. SWNTs/POB plate‐like or lozenge‐shaped crystals were successfully prepared by direct polymerization of p‐hydroxybenzoic acid (HBA) in a mixed solvent of DMF/Py with TsCl in the presence of functionalized SWNTs. The size of the plate‐like crystals were ～200 nm to 3 μm. The crystals consisted of some layers, ～3 nm thick plates. Model reactions showed that esterification reactions proceed between functionalized SWNTs and HBA monomers in the polymerization system. The obtained crystals exhibited unique morphology and high crystallinity, producing a novel SWNT/POB hybrid. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1265–1277, 2008