Spectrophotometric and analogue derivative spectrophotometric determination of ultramicro amounts of cadmium with cationic porphyrins

alpha,beta,gamma,delta-Tetrakis(1-methylpyridinium-3-yl)porphine [T(3-MPy)P] and alpha,beta,gamma,delta-tetrakis(1-methylpyridinium-4-yl)porphine [T(4-MPy)P] have been found to react rapidly with cadmium to give coloured complexes in weakly alkaline media at room temperature. Simple and practical methods for the determination of cadmium at ng/ml levels by conventional and analogue derivative spectrophotometry have been proposed. The analogue method gives higher sensitivity. T(3-MPy)P gives higher sensitivity than T(4-MPy)P. The interference of various foreign cations and anions has also been examined and in many cases eliminated or reduced. Adsorption of the porphyrins and their cadmium complexes onto the glassware, which is usually observed under the conditions of reaction and causes significant errors in the determination, can be suppressed almost completely by addition of fairly large amounts of a salt such as sodium chloride.     

Heat of immersion of iron(III) oxides in water at 25°C

The heat of immersion in water was measured at 25°C for three iron(III) oxides using a twin-type microcalorimeter. One of the samples was commercial α-Fe₂O₃ (sample C) and the other two (samples M and F) were prepared by calcining magnetite and iron(III) hydroxide in air at various temperatures, T_p, from 300 to 700°C. The samples were evacuated at outgassing temperature, T_o, between room temperature and 500°C at a pressure of 1 × 10^?2?2.7 × 10^?2N m^?2 for 6 h. The heat of immersion, h_i(J m^?2), of samples C and M increased with an increase in T_o and showed the maximum h_i at T_o =400°C, while sample F did not show the maximum up to T_o =500°C. The systematic correlation was not observed between h_i and T_p of sample F. The heat of reproduction of the surface hydroxyl group on sample F was approximately estimated as 6.6 × 10⁴ J mole^?1 H₂O.     

8-Endo selective Friedel-Crafts cyclization of vinyloxiranes with Co2(CO)6-complexed acetylene

An 8-endo selective Friedel-Crafts cyclization of vinyloxirane 8 with Co₂(CO)₆-complexed benzeneacetylene was found to give poly-functional eight-membered cyclic compound 9 in high yields.     

Diversity oriented synthesis of conjugate dienes and alkenylcyclopropanes utilizing silyl group-substituted titanium carbene complexes as bimetallic synthetic reagents

Diversity oriented synthesis of conjugate dienes and alkenylcyclopropanes by the sequential reactions using silyl group-substituted titanium carbene complexes was studied. Dienylsilanes were obtained by the olefination of carbonyl compounds with γ-silylvinylcarbene complexes. Cyclopropanation of 1-alkenes with the vinylcarbene complexes produced (E)-(β-silylvinyl)cyclopropanes with high stereoselectivity. The reaction of β-(trialkylsilyl)carbene complexes with zinc alkoxides of homopropargyl alcohols produced 6-silyl-3,5-hexadien-1-ols with high regio- and stereoselectivity. The (E)-alkenylsilanes thus obtained were transformed into a range of unsaturated compounds by the palladium-catalyzed or copper(I)-promoted cross-coupling with organic halides with retention of configuration.     

Reactions of group IV organometallic compounds : XXVII. Some reactions of [(trimethylsilyl)imino]phosphorane

The reaction of [(trimethylsilyl)imino]methyldiphenylphosphorane: Ph₂MePNSiMe₃ (I) with several acid anhydrides or alkyl isocyanates took place by the simple cleavage of silicon-nitrogen bond. In contrast the interaction of (I) with phenyl isocyanate, isothiocyanate or carbon disulphide led to addition-elimination reactions of the Wittig type. Detailed investigation in the case of phenyl isocyanate indicated the usual elimination of Ph₂MePO is suppressed by the strong affinity of the trimethylsilyl group for anionic oxygen atom.     

Conformational analysis of N-aryl-N-(2-azulenyl)acetamides

Aromatic amides bearing 2-azulenyl group on the amide nitrogen were synthesized and their structures were investigated. The π-electron density of the N-aryl group was found to influence the cis-trans conformational preferences of these compounds in solution. X-ray crystallography revealed that the plane of the 2-azulenyl ring has a strong tendency to lie coplanar with the amide plane when the azulene group is located on the same side as the amide oxygen atom.     

Simultaneous discrimination of diastereotopic groups and faces: the first example in intramolecular [3+2] and [2+2+1] cycloaddition reactions

To explore a novel concept for controlling diastereoselectivity, systematic studies on the sense and degree of diastereotopic groups and face selections in intramolecular [3 + 2] (nitrile oxide and nitrone) and [2 + 2 + 1] (Pauson-Khand) cycloadditions have been conducted. Optically pure methyl (S)-3,4-O-isopropylidene-3,4-dihydroxybutanoate (5) and methyl (S)-2,3-O-isopropylidene-2,3-dihydroxypropanoate (6) were converted to substrate aldehydes (1-4) that bear geminal allyl groups and four types of controllers with the intention of imparting a stereochemical bias to the allylic groups and their faces. The controllers involve 1,2-bis(tert-butyldimethylsiloxy), 1,3-bis(tert-butyldimethylsiloxy), 1,2-acetonide, and 1,3-acetonide groups, which are referred to as 1,2-(TBDMSO)(2), 1,3-(TBDMSO)(2), 1,3-dioxolane, and 1,3-dioxane, respectively. Twelve runs of cycloaddition reactions as combinations between the three types of reactions and the four types of substrates were performed to provide bicyclo[4.3.0] or -[3.3.0] adducts of synthetic importance in which isoxazolidine, isoxazoline, or cyclopentenone segments were fused. For every case, high levels of diastereoselectivity have been achieved: >99% (in eight cases), 82%, and 76% for the discrimination of diastereotopic groups and 68-->99% for the discrimination of diastereotopic faces. On the basis of the absolute structures of the cycloadducts, plausible stereochemical models are proposed.     

Synthesis of TiRru2 heterobimetallic and TiRuM (M = Rh, Rr, Pd, Pt) heterotrimetallic sulfido clusters from a hydrosulfido-bridged titanium-ruthenium complex

Treatment of the hydrosulfido-bridged titanium-ruthenium heterobimetallic complex [Cp2Ti(mu2-SH)2RuCl(eta5-C5Me5)] (1; Cp = eta5-C5H5) with an excess of triethylamine followed by addition of [RuCl2(PPh3)3] and [[(cod)M]2(mu2-Cl)2] (M = Rh, Ir; cod = 1,5-cyclooctadiene) led to the formation of the TiRu2 and TiRuM mixed-metal sulfido clusters [(CpTi)[(eta5-C5Me5)Ru][Ru(PPh3)2](mu3-S)2(mu2-Cl)2] (3) and [(CpTi)[(eta5-C5Me5)Ru][M(cod)](mu3-S)2(mu2-Cl)] (M = Rh (4a), Ir (4b)), respectively. On the other hand, the reactions of 1 with [M(PPh3)4] (M = Pd, Pt) afforded the TiRuM trinuclear clusters [(CpTiCl)[(eta5-C5Me5)Ru][M(PPh3)2](mu3-S)(mu2-S)(mu2-H)] (M = Pd (5a), Pt (5b)) with an unprecedented M3(mu3-S)(mu2-S) core. The detailed structures of these triangular clusters 3-5 have been determined by X-ray crystallography. Crystal data: 3, triclinic, P1, a = 12.448(4) A, b = 12.773(4) A, c = 17.270(4) A, alpha = 100.16(2) degrees, beta = 99.93(2) degrees, gamma = 114.11(3) degrees, V = 2373(1) A(3), Z = 2; 4a, triclinic, P1, a = 7.714(2) A, b = 11.598(3) A, c = 14.802(4) A, alpha = 80.46(2) degrees, beta = 82.53(2) degrees, gamma = 71.47(2) degrees, V = 1234.0(6) A3, Z = 2; 4b, triclinic, P1, a = 7.729(1) A, b = 11.577(2) A, c = 14.766(3) A, alpha = 80.14(1) degrees, beta = 82.71(1) degrees, gamma = 71.55(1) degrees, V = 1231.1(4) A3, Z = 2; 5a, monoclinic, P2(1)/c, a = 11.259(4) A, b = 16.438(4) A, c = 26.092(5) A, beta = 102.23(3) degrees, V = 4719(2) A(3), Z = 4; 5b, monoclinic, P2(1)/n, a = 11.369(2) A, b = 16.207(3) A, c = 26.116(2) A, beta = 102.29(1) degrees, V = 4701(1) A3, Z = 4.