Ketonization of Secondary Hydroxy Groups of Alcohols and Diols with Hydrogen Peroxide Under the Influence of Tricetylpyridinium-12-Tungstophosphate

Molydbenum and tungsten-catalyzed oxidations of alcohols with dilute hydrogen peroxide under phase-transfer conditions have been focused in recent years 1–3. In a previous paper, we have reported that tricetylpyridinium-12-molybdophosphate(CMP), [π - C₅H₅N+(CH_{2 15}CH₃]₃ (PMO₁₂O₄₀)³-, prepared from 12-molybdophosphoric acid (MPA) and cetylpyridinium chloride (CPC), catalyzed the oxidation of secondary alcohols to carbonyl compounds with tert-butylhydroperoxide(t-BuOOH)⁴. When hydrogen peroxide in place of t-BuOOH was employed as the oxidant for the above oxidation, however, alcohols were oxidized with difficulty to give carbonyl compounds in poor yields. In continuation of this study, we wish to report here the selective oxidation of secondary hydroxy group of alcohols and diols and diols with H₂O₂ under the influence to tricetylpyridinium-12 tungstophosphate (CWP), [π-C₅H₅N+ (CH₂) 15 CH₃]₃(PW₁₂O₄₀)³-, derived from 12-tungstophosporic acid (WPA) and CPC.     

Thermal oxidative degradation of additive-free polypropylene pellets investigated by multichannel Fourier-transform chemiluminescence spectroscopy

Thermal oxidative degradation of additive-free polypropylene pellets heated isothermally in dry air at 150 and 180 °C (below and above the melting point of 163 °C) was investigated by multichannel Fourier-transform chemiluminescence spectroscopy. The initial peak wavelength of chemiluminescence emission at 490 nm remained constant during the early stages of thermal degradation, but new emissions developed with time in the red spectral region over an extended oxidation period. The time-dependent luminescence spectra were deconvoluted into three emission bands by least-squares fitting using Gaussian curves. We concluded that at least three groups of luminescent species (luminophores), having different conjugation lengths, were generated by thermal oxidation over extended periods and show luminescence around 490, 660, and 740 nm.     

Enhancing the Cellulose-Degrading Activity of Cellulolytic Bacteria CTL-6 (Clostridium thermocellum) by Co-Culture with Non-cellulolytic Bacteria W2-10 (Geobacillus sp.)

The effect of a non-cellulolytic bacterium W2-10 (Geobacillus sp.) on the cellulose-degrading activity of a cellulolytic bacterium CTL-6 (Clostridium thermocellum) was determined using cellulose materials (paper and straw) in peptone cellulose solution (PCS) medium under aerobic conditions. The results indicated that in the co-culture, addition of W2-10 resulted in a balanced medium pH, and may provide the required anaerobic environment for CTL-6. Overall, addition of W2-10 was beneficial to CTL-6 growth in the adverse environment of the PCS medium. In co-culture with W2-10, the CTL-6 cellulose degradation efficiency of filter paper and alkaline-treated wheat straw significantly increased up to 72.45 and 37.79 %, respectively. The CMCase activity and biomass of CTL-6 also increased from 0.23 U ml^?1 and 45.1 μg ml^?1 (DNA content) up to 0.47 U ml^?1 and 112.2 μg ml^?1, respectively. In addition, co-culture resulted in accumulation of acetate and propionate up to 4.26 and 2.76 mg ml^?1. This was a respective increase of 2.58 and 4.45 times, in comparison to the monoculture with CTL-6.     

Preparation of various Janus composite particles with two components differently combined

Janus composite particles with a combination of organic and inorganic substances were synthesized by soap-free emulsion polymerization in which an amphoteric initiator of 2,2′-azobis[N-(2-carboxyethyl)-2-2-methylpropionamidine] (VA-057) was employed to introduce a polystyrene (PSt) lobe onto silica cores surface-modified with 3-methacryloxypropyltrimethoxy silane (MPTMS). Thermogravimetric analysis and X-ray photoelectron spectroscopy were used to characterize the surface-modified silica particles and showed that a small amount of MPTMS introduced onto the surface of silica particles could successfully prepare SiO₂–PSt Janus particles. The oxide part of SiO₂–PSt Janus particles obtained with the polymerization was further surface-modified with 3-aminopropyltriethoxysilane (APS) to introduce positively charged amino groups on the silica surface. The silica surface modified with APS was covered with gold by electroless deposition in which a gold precursor of auric chloride was reduced with ascorbic acid in the presence of polyvinylpyrrolidone. The electroless deposition of gold successfully produced Janus particles with a combination of gold and PSt surfaces. Furthermore, dissolution of the polymer component of the Au–PSt Janus particles in tetrahydrofuran led to another Janus type of particles with an inorganic combination of Au and SiO₂.     

Diversity oriented synthesis of conjugate dienes and alkenylcyclopropanes utilizing silyl group-substituted titanium carbene complexes as bimetallic synthetic reagents

Diversity oriented synthesis of conjugate dienes and alkenylcyclopropanes by the sequential reactions using silyl group-substituted titanium carbene complexes was studied. Dienylsilanes were obtained by the olefination of carbonyl compounds with γ-silylvinylcarbene complexes. Cyclopropanation of 1-alkenes with the vinylcarbene complexes produced (E)-(β-silylvinyl)cyclopropanes with high stereoselectivity. The reaction of β-(trialkylsilyl)carbene complexes with zinc alkoxides of homopropargyl alcohols produced 6-silyl-3,5-hexadien-1-ols with high regio- and stereoselectivity. The (E)-alkenylsilanes thus obtained were transformed into a range of unsaturated compounds by the palladium-catalyzed or copper(I)-promoted cross-coupling with organic halides with retention of configuration.     

Selective ablation of atherosclerotic lesions with less thermal damage by controlling the pulse structure of a quantum cascade laser in the 5.7-µm wavelength range

Cholesteryl esters are the main components of atherosclerotic plaques, and they have an absorption peak at the wavelength of 5.75 µm. To realize less-invasive ablation of the atherosclerotic plaques using a quasi-continuous wave (quasi-CW) quantum cascade laser (QCL), the thermal effects on normal vessels must be reduced. In this study, we attempted to reduce the thermal effects by controlling the pulse structure. The irradiation effects on rabbit atherosclerotic aortas using macro pulse irradiation (irradiation of pulses at intervals) and conventional quasi-CW irradiation were compared. The macro pulse width and the macro pulse interval were determined based on the thermal relaxation time of atherosclerotic and normal aortas in the oscillation wavelength of the QCL. The ablation depth increased and the coagulation width decreased using macro pulse irradiation. Moreover, difference in ablation depth between the atherosclerotic and normal rabbit aortas using macro pulse irradiation was confirmed. Therefore, the QCL in the 5.7-µm wavelength range with controlling the pulse structure was effective for less-invasive laser angioplasty.     

Determination of the scattering coefficient of biological tissue considering the wavelength and absorption dependence of the anisotropy factor

The anisotropy factor g, one of the optical properties of biological tissues, has a strong influence on the calculation of the scattering coefficient μ _s in inverse Monte Carlo (iMC) simulations. It has been reported that g has the wavelength and absorption dependence; however, few attempts have been made to calculate μ _s using g values by taking the wavelength and absorption dependence into account. In this study, the angular distributions of scattered light for biological tissue phantoms containing hemoglobin as a light absorber were measured by a goniometric optical setup at strongly (405 nm) and weakly (664 nm) absorbing wavelengths to obtain g. Subsequently, the optical properties were calculated with the measured values of g by integrating sphere measurements and an iMC simulation, and compared with the results obtained with a conventional g value of 0.9. The μ _s values with measured g were overestimated at the strongly absorbing wavelength, but underestimated at the weakly absorbing wavelength if 0.9 was used in the iMC simulation.     

1.5 mJ, 6.4 fs parametric chirped-pulse amplification system at 1 kHz

We demonstrate an optical parametric chirped-pulse amplification (OPCPA) system with the pulse energy of 1.5 mJ at a 1 kHz repetition rate. The newly developed 100 ps Ti:sapphire pump laser system, which was optically synchronized with OPCPA seed pulses, delivered 10 mJ, 400 nm pump pulses. After three-stage parametric amplification, recompression of the amplifier output from 45 ps to 6.4 fs was performed. The pulse width of 6.4 fs is, to our knowledge, the shortest ever obtained by OPCPA, and the average power of 1.5 W (1.5 mJ, 1 kHz) is believed to be the highest among few-cycle OPCPA systems.     

Linear polybiurets: Facile synthesis and characteristic properties

Linear polybiurets have been synthesized by polyaddition of benzyloxyamine and diisocyanates, and properties of the novel polymeric materials have been elucidated. Prior to polymerization, model reactions between benzyloxyamine and phenyl isocyanate were examined in detail and proved to be controlled by the molar ratio of reagents and by catalysts to give the urea (1:1 adduct) and/or biuret (1:2 adduct). Under appropriate conditions, the biuret was synthesized in a quantitative yield. Polymerization of equimolar amounts of benzyloxyamine and diphenylmethane or hexamethylene diisocyanate proceeded smoothly to give polybiurets with inherent viscosities up to 0.52 dL/g. The benzyl group of the model biuret and polybiuret could be removed by catalytic hydrogenation. Both the N-benzyloxy-type and N-hydroxy-type polybiurets showed excellent solubility in common organic solvents. The two kinds of polybiurets as well as model biurets adsorbed metal cations efficiently. The N-hydroxybiuret structure exhibited particularly high affinity for iron(III) and was useful for selective removal of iron from metal cation mixtures. © 1996 John Wiley & Sons, Inc.     

Rearrangement of 6,7-dithiabicyclo[3.1.1]heptane 6-oxides to a 7,8-dithia-6-oxabicyclo[3.2.1]octane catalyzed by montmorillonite K 10

Treatment of 2,2,4,4-tetramethyl-1,5-diphenyl-6,7-dithiabicyclo[3.1.1]heptane 6-endo-oxide ( 2 ) with Montmorillonitc K 10 in dichloromethane gave 2,2,-4,4-tetramethyl-1,5-diphenyl-7,8-dithia-6-oxabicyclo-[3.2.1]octane ( 6 ) (11%) with recovery of 2 (87%). Under similar reaction conditions, the 6-exo-oxide 7 and the sulfenate 6 gave a mixture of 6 (21%), 2 (67%), and 7 (9%) and a mixture of 2 (89%) and 6 (9%), respectively. These results indicate the relative thermodynamic stabilities of the three compounds to be 2 > 6 > 7 . PM3 calculations on these compounds showed the heats of formation (kcal/mol) to be in the following order: 6 (44.12783), 2 (57.46721), and 7 (59.37918). The driving force of this unusual 1,2-rearrangement of 2 and 7 to 6 would be the release of the ring strain of the bicyclo[3.1.1]heptane system of 2 and 7 by ring expansion.