Dynamic interfacial tension at the oil/surfactant-water interface

We have used dynamic interfacial tension measurements to understand the structure of the ordered monolayer at the hexadecane/water interface induced by the presence of surfactant molecules. No abrupt changes in the interfacial tension (gamma) are observed during the expansion and contraction cycle below the interfacial ordering temperature (Ti) as observed for alkanes in contact with air. The lack of an abrupt change in gamma and the magnitude of this change during the expansion process indicate that the ordered phase may not be crystalline. The change in the interfacial tension is due to an increase in contact between water and hexadecane molecules and the disordering of the interfacial ordered layer. At low surfactant concentrations, the recovery of the interfacial tension is slower below Ti, suggesting that there is a critical surfactant concentration necessary to nucleate an ordered phase at the interface.     

Organically modified silica nanoparticles co-encapsulating photosensitizing drug and aggregation-enhanced two-photon absorbing fluorescent dye aggregates for two-photon photodynamic therapy

We report energy-transferring organically modified silica nanoparticles for two-photon photodynamic therapy. These nanoparticles co-encapsulate two-photon fluorescent dye nanoaggregates as an energy up-converting donor and a photosensitizing PDT drug as an acceptor. They combine two features: (i) aggregation-enhanced two-photon absorption and emission properties of a novel two-photon dye and (ii) nanoscopic fluorescence resonance energy transfer between this nanoaggregate and a photosensitizer, 2-devinyl-2-(1-hexyloxyethyl)pyropheophorbide. Stable aqueous dispersions of the co-encapsulating nanoparticles (diameter < or = 30 nm) have been prepared in the nonpolar interior of micelles by coprecipitating an organically modified silica sol with the photosensitizer and an excess amount of the two-photon dye which forms fluorescent aggregates by phase separation from the particle matrix. Using a multidisciplinary nanophotonic approach, we show: (i) indirect excitation of the photosensitizer through efficient two-photon excited intraparticle energy transfer from the dye aggregates in the intracellular environment of tumor cells and (ii) generation of singlet oxygen and in vitro cytotoxic effect in tumor cells by photosensitization under two-photon irradiation.     

Coupled molecular dynamics-Monte Carlo model to study the role of chemical processes during laser ablation of polymeric materials

The coarse grained chemical reaction model is enhanced to build a molecular dynamics (MD) simulation framework with an embedded Monte Carlo (MC) based reaction scheme. The MC scheme utilizes predetermined reaction chemistry, energetics, and rate kinetics of materials to incorporate chemical reactions occurring in a substrate into the MD simulation. The kinetics information is utilized to set the probabilities for the types of reactions to perform based on radical survival times and reaction rates. Implementing a reaction involves changing the reactants species types which alters their interaction potentials and thus produces the required energy change. We discuss the application of this method to study the initiation of ultraviolet laser ablation in poly(methyl methacrylate). The use of this scheme enables the modeling of all possible photoexcitation pathways in the polymer. It also permits a direct study of the role of thermal, mechanical, and chemical processes that can set off ablation. We demonstrate that the role of laser induced heating, thermomechanical stresses, pressure wave formation and relaxation, and thermochemical decomposition of the polymer substrate can be investigated directly by suitably choosing the potential energy and chemical reaction energy landscape. The results highlight the usefulness of such a modeling approach by showing that various processes in polymer ablation are intricately linked leading to the transformation of the substrate and its ejection. The method, in principle, can be utilized to study systems where chemical reactions are expected to play a dominant role or interact strongly with other physical processes.     

Molecularly imprinted polymer-based solid-phase extraction combined with molecularly imprinted polymer-based sensor for detection of uric acid

The development of an easy-to-use, rapid, robust and inexpensive technique is required which can measure the basal concentration of uric acid (UA) lower than 1.0 x 10(-7)M ( approximately 0.017 mgL(-1)) in biological samples to attend the problem of hypouricemia. In the present work an artificial receptor for UA, silica gel-bonded molecularly imprinted polymer (MIP), was used as a sorbent for molecularly imprinted solid-phase extraction (MISPE) in column chromatography. The use of a sensor based on a MIP-modified hanging mercury drop electrode (HMDE), as reported from our laboratory, could estimate UA with detection limit as low as 0.024 mgL(-1) under the optimized conditions of differential pulse, cathodic stripping voltammetric (DPCSV) measurement. However, in the current investigation, with the use of the combination of MISPE followed by detection with a MIP-based HMDE sensor, the minimum detectable concentration could go down to 0.0008 mgL(-1) (RSD=0.63%, S/N=3). The same MIP receptor for both MISPE and the corresponding sensor was able to enhance the preconcentration of analyte substantially so as to attain the desired level of sensitivity; and that to without any interference (cross-reactivity) from other structurally related analogues including the major interferent like ascorbic acid prevalent in the aqueous environment of biological samples.     

Enantiodivergent synthesis of both enantiomers of gypsy moth pheromone disparlure

Enantiodivergent synthesis of both (-)- and (+)-disparlure, a bioactive pheromone, possessing a cis-epoxide has been accomplished. The key step involves the cross metathesis of a chiral homoallylic alcohol derived from l-(+)-tartaric acid.     

A new class of discotic mesogens derived from tris(N-salicylideneaniline)s existing in C3h and Cs keto-enamine forms

Two series of a unique class of columnar liquid crystals derived from tris(N-salicylideneaniline)s [TSANs] in which the proton and the electron interact with each other through the H-bonding environment are reported. The synthesis is carried out by condensing 1,3,5-triformylphloroglucinol with the respective dialkoxyanilines or trialkoxyanilines. 1H NMR and 1H-1H COSY NMR studies revealed their existence as an inseparable mixture of two keto-enamine tautomeric forms with C3h and Cs rotational symmetries instead of the expected enol-imine form. The influence of the number of peripheral alkoxy tails on the columnar mesomorphic behavior is investigated by using polarizing optical microscopy, differential scanning calorimetry, and X-ray scattering. The fluid/glassy columnar states probed for a number of representative compounds confirmed the D6h (hexagonal) or D2h (rectangular) symmetry of the columns. The electronic absorption and emission characteristics of these compounds have been studied in both mesomorphic and solution states. Of special interest, the photoluminescence spectra of solution and fluid/glassy two-dimensional structure evidently disclose the promising light generating capability of these new discotics systems.     

Seaweed Polysaccharide Based Products and Materials: An Assessment on Their Production from a Sustainability Point of View

Among the various natural polymers, polysaccharides are one of the oldest biopolymers present on the Earth. They play a very crucial role in the survival of both animals and plants. Due to the presence of hydroxyl functional groups in most of the polysaccharides, it is easy to prepare their chemical derivatives. Several polysaccharide derivatives are widely used in a number of industrial applications. The polysaccharides such as cellulose, starch, chitosan, etc., have several applications but due to some distinguished characteristic properties, seaweed polysaccharides are preferred in a number of applications. This review covers published literature on the seaweed polysaccharides, their origin, and extraction from seaweeds, application, and chemical modification. Derivatization of the polysaccharides to impart new functionalities by chemical modification such as esterification, amidation, amination, C-N bond formation, sulphation, acetylation, phosphorylation, and graft copolymerization is discussed. The suitability of extraction of seaweed polysaccharides such as agar, carrageenan, and alginate using ionic solvent systems from a sustainability point of view and future prospects for efficient extraction and functionalization of seaweed polysaccharides is also included in this review article.     

Investigation of liquid crystalline property of a new calamitic liquid crystalline system methyl 4-(4ʹ-(4ʹʹ-(decyloxy)benzyloxy) benzylideneamino)benzoate

A new polar calamitic liquid crystal, methyl 4-(4?-(4?-(decyloxy)benzyloxy) benzylideneamino)benzoate (M3BA) containing ether and Schiff base groups as linker with terminal polar ester group, has been synthesised and mesomorphic properties are studied by differential scanning calorimetry, polarising optical microscopy, density functional theory, temperature-dependent X-ray diffraction and temperature-dependent micro- Raman study. The smectic A (SmA) mesophase with focal conic texture has been observed with wide mesomorphic range. Layer thickness in SmA phase is greater than the optimised length of the molecule, indicating partially bilayer SmA phase. Analysis of Raman marker bands of C–H in-plane bending of phenyl rings, C=C stretching of rings, C=N stretching and C=O stretching shows structural changes at molecular level at Cr → SmA phase transition and provides proper intermolecular interactions responsible for dimeric unit in partially bilayer SmA phase.     

Transparent hydrophobic and superhydrophobic coatings fabricated using polyamide 12–SiO2 nanocomposite

Optically transparent hydrophobic and superhydrophobic coatings have been prepared using polyamide 12–SiO₂ nanocomposite (NC) on glass substrates by the spin‐coating method. The coatings have been optimized for their hydrophobicity and transparency. The transformation from hydrophobic to superhydrophobic is achieved with increase in roughness (R_a) which increases with SiO₂ content. These coatings are highly transparent in the entire visible region (400–800 nm). The influence of layer thickness on water contact angle (WCA) and optical transmittance of the coatings has been studied. Field emission scanning electron micrograph (FESEM) shows the presence of SiO₂ nanoparticles covered with polyamide homogenously on the surface and the particles are aggregated to form a rough structure. X‐ray diffraction (XRD) patterns show that the polyamide losses its crystalline structure in the composite. The preparation procedure reported here is simple and eco‐friendly. The dual nature of the coatings, that is, high transparency and superhydrophobicity in the entire visible region suggests for its potential usage in self‐cleanings, wind screen and optoelectronic applications. Copyright © 2016 John Wiley & Sons, Ltd.     

Multi Fuzzy Fractal Theorems in Fuzzy Metric Spaces

The Hutchinson-Barnsley (HB) operators are studied for multi iterated function system in a general setting. Some existence and uniqueness results are obtained in fuzzy fractal and multi fuzzy fractal spaces. From them, we obtain our results, which generalize some recent results in the literature.