Effect of niobium doping on physical, thermal, and spectral parameters of infrared transmitting BGO70 glasses

Heavy metal oxide glasses doped with 2d transition metal niobium were casted through normal melt-quench technique in the formula composition (100?x) [3Bi₂O₃–7GeO₂ (BGO70)]?xNb₂O₅ where 5 ≤ x ≤ 25. Experimentally measured values of density d _exp were 6.737–7.149 g/cc ± 0.06 %. Corresponding molar volume V _m exp had values 29.677–31.550 cc ± 0.04 %, V _pyc varied 32.28–34.71 cc ± 0.03 % and oxygen molar volume $ V_{{{\text{mO}}^{2-} }} $ increased linearly from 17.761 to 20.467 cc ± 0.06 %. Thermal coefficient of linear expansion was between 5.316 ± 0.001 × 10^?6 and 8.033 ± 0.001 × 10^?6 K^?1. Glass transition temperature T _g, onset of crystallization temperature T _x, and the stability factor ΔT were noted from DTA curves. Direct allowed energy gap E _g was between 1.809–2.988 eV and Urbach energy had value 0.32–1.49 eV. Maximum transmission efficiency was 74 % for glass BGO70-Nb10. FTIR spectra revealed that lattice vibration modes were active in 400–1,300 cm^?1 range. A modifying behavior was assigned to Nb⁵⁺ ion in the system.     

Antiplatelet and anti-HIV constituents from Euchresta formosana

Phytochemical investigation of the methanol extract of Euchresta formosana resulted in the isolation of thirty-four compounds. Compounds 1, 3-12, 15, 27, 29 and 32-24 were isolated from this species for the first time. These compounds were identified by spectral analyses and tested for antiplatelet aggregation and anti-HIV activities. Among these compounds, tectorigenin (1), 3',4',5-trihydroxyisoflavone (3), and euchretin F (19) were the most effective antiplatelet aggregation compounds; they inhibited both AA- (arachidonic acid) and collagen-induced platelet aggregation. Meanwhile, flemiphyllin (B), quercetin (13), euchretin M (23), and formosanatin C (26) inhibited HIV replication in H9 lymphocyte cells.     

Installation of carbon chain onto 2-cyclohexene-1,4-diol monoacetate

Alkylation of cyclohexenyl monoacetate 1 with R₂Cu(CN)(MgCl)₂ or RMgBr/CuCN (cat.) in Et₂O produced trans 1,2-isomers 4, while arylation and alkenylation of 1 was accomplished with lithium borates 5 and a nickel cat. to afford trans 1,4-isomers 3 selectively. Furthermore, several transformations of the products were carried out to demonstrate synthetic advantages of the present reactions.     

An optimized mixed‐mode stationary phase based on silica monolith particles for the separation of peptides and proteins in high‐performance liquid chromatography

A phase with both hydrophobic and hydrophilic functionalities has been synthesized by modification of ground silica monolith particles with C18 and 1‐[3‐(trimethoxysilyl)propyl] urea ligands. A series of phases was prepared by changing the ratio of the two ligands to determine the optimal ratio in view of separation efficiency. The resultant optimized stationary phase was packed in narrow‐bore glass‐lined stainless‐steel columns (1 × 300 mm and 2.1 × 100 mm) and used for the separation of synthetic peptides and proteins. The average numbers of theoretical plates (N) of 52 100/column (174 000/m, 5.75 µm plate height) and 35 500/column (118 000/m, 8.47 µm plate height) were achieved with the 300 mm column at a flow rate of 25 µL/min (0.86 mm/s) in 60:40 v/v acetonitrile/30 mM aqueous ammonium formate for the mixture of peptides (Thr‐Tyr‐Ser, Val‐Ala‐Pro‐Gly, angiotensin I, isotocin, and bradykinin) and for the mixture of proteins (myoglobin, human serum albumin, and insulin), respectively. Fast analysis of the peptides and proteins was also carried out at a flow rate of 0.9 mL/min (6.88 mm/s) with the 100 mm column and all the analytes were eluted within 2 min with good separation efficiency.     

Development of a simple extraction and clean-up procedure for determination of organochlorine pesticides in soil using gas chromatography–tandem mass spectrometry

A procedure based on QuEChERS extraction and a simultaneous liquid–liquid partition clean-up was developed. The procedure involved extraction of hydrated soil samples using acetonitrile and clean-up by liquid–liquid partition into n-hexane. The hexane extracts produced were clean and suitable for determination using gas chromatography–tandem mass spectrometry (GC–MS/MS). The method was validated by analysis of soil samples, spiked at five levels between 1 and 200 μg kg⁻¹. The recovery values were generally between 70 and 100% and the relative standard deviation values (%RSDs) were at or below 20%. The procedure was validated for determination of 19 organochlorine (OC) pesticides. These were hexachlorobenzene (HCB), α-HCH, β-HCH, γ-HCH, heptachlor, heptachlor epoxide (trans), aldrin, dieldrin, chlordane (trans), chlordane (cis), oxychlordane, α-endosulfan, β-endosulfan, endosulfan sulfate, endrin, p,p′-DDT, o,p′-DDT, p,p′-DDD and p,p′-DDE. The method achieved low limits of detection (LOD; typically 0.3 μg kg⁻¹) and low limits of quantification (LOQ; typically 1.0 μg kg⁻¹). The method performance was also assessed using five fortified soil samples with different physico-chemical properties and the method performance was consistent for the different types of soil samples. The proposed method was compared with an established procedure based on Soxtec extraction. This comparison was carried out using six soil samples collected from regions of Pakistan with a history of intensive pesticide use. The results of this comparison showed that the two procedures produced results with good agreement. The proposed method produced cleaner extracts and therefore led to lower limits of quantification. The proposed method was less time consuming and safer to use. The six samples tested during this comparison showed that soils from cotton growing regions contained a number of persistent OC residues at relatively low levels (<10 μg kg⁻¹). These residues were α-HCH, γ-HCH, heptachlor, chlordane (trans), p,p′-DDT, o,p′-DDT, p,p′-DDD, p,p′-DDE, β-endosulfan and endosulfan sulfate.     

Prototype reflectivity analyses of hydrogen storage levels in single-walled carbon nanotubes

A prototype case study is presented that examines the level of hydrogen content in H-SWNTs using the Surface Plasmon Resonance technique. The damping effect and the angular shift in the resonance minimum of an SWNT-gold interface due to the presence of hydrogen is analyzed using a parametric model, which is based on the concept of an effective permittivity. The new approach provides for a non-invasive analysis of the level of hydrogen content in H-SWNTs and is potentially extendable to other carbon-based hydrogen storage materials.     

Elucidation of the structures of 3-alkylthio-, 3-benzylthio-, 2-arylthio- and 2-heteroarylthio-N1-(1,3-dimethylbutyl)-N4-phenyl-1,4-phenylenediamines by one- and two-dimensional NMR spectroscopy

Nucleophilic addition of alkyl- and benzylthiols to benzoquinone diimine (1) gave the corresponding 3-alkylthio- or 3-benzylthio-1,4-phenylenediamines (2-5). However, addition of aryl- or heteroarylthiols to 1 formed 2-arylthio- or 2-heteroarylthio-1,4-phenylenediamines (6-14). The structures of 2-14, obtained in 55-91% yields, were confirmed in CDCl3 or DMSO-d6 solution using 1D (NOE difference, coupled 13C NMR spectra, APT and DEPT) and 2D NMR techniques [DQCOSY, NOESY, HETCOR and heteronuclear multiple bond coherence (HMBC)] that resulted in unambiguous proton and carbon NMR resonance assignments. The substituent-induced 13C NMR chemical shift differences were calculated in 2-14 relative to carbon atoms in the model compound N1-(1,3-dimethylbutyl)-N4-phenyl-1,4-phenylenediamine (DMBPPD) (15) (a reduced form of benzoquinone diimine).     

Synthesis of novel thieno[3,2-b]thienobis(silolothiophene) based low bandgap polymers for organic photovoltaics

Thieno[3,2-b]thienobis(silolothiophene), a new electron rich hexacyclic monomer has been synthesized and incorporated into three novel donor-acceptor low-bandgap polymers. By carefully choosing the acceptor co-monomer, the energy levels of the polymers could be modulated and high power conversion efficiencies of 5.52% were reached in OPV devices.     

Luciferase-transfected colon adenocarcinoma cell line (DLD-1) for use in Orthotopic Xenotransplantation studies

ABSTRACT: BACKGROUND: Renilla Luciferase reporter gene (rLuc) GL4.82 and GL4.13 promoter are key player in transfection, but precise knowledge of its targets in colon cancer remains limited. The aim of this study was to characterize the best transfection technique to produce a stable transfected colon DLD1 (colorectal adenocarcinoma cell line), therefore imaging based approaches were employed. RESULTS: DLD1 cells were transfected with a Plasmid (SV40-RLuc) carrying Renilla luciferase under the control of the SV-40 promoter, by using two different transfection techniques. Cells expressing the required DNA were isolated after antibiotic (Puramycin) selection. Clones of DLD-1/SV40-RLuc were produced using two different techniques (96 well plates and Petri dish) and their florescence intensity was recorded using IVIS machine (Calliper Life Sciences, Hopkinton, USA). Both techniques were characterized with the help of serial dilution technique. Results from this study substantiated that electroporation is the best. As expected, clones varied in their specific luciferase activity along with the dilutions. With the increase in cell concentration increase in intensity of florescence was recorded. CONCLUSIONS: Based on the results we are confident that this transfected cell line DLD-1/SV40-RLuc (colorectal adenocarcinoma cell line) is the best for further Orthotopic Xenotransplantation Studies and in-vivo experiments as well. Investigation shows that DLD1/SV-rLuc cells have gained little bit resistance against both drugs therefore further study is suggested to know the reasons.     

Bis(β-Difunctional) Compounds: Versatile Starting Materials for Novel Bis(Heterocycles)

New bis(β-difunctional) compounds could be prepared in good yields. Their utility as intermediates in the synthesis of novel bis(heterocycles) were also investigated.