Characterization of n-butyl acrylate centered triads in poly(n-butyl acrylate-co-carbon monoxide-co-ethylene) by isotopic labeling and two dimensional NMR

Poly(n-butylacrylate-co-carbon monoxide-co-ethylene) (polyEBC) samples prepared from 13C-labeled monomer, n-butyl acrylate, were characterized using two dimensional (2D) pulsed field gradient (PFG) 750 MHz NMR spectroscopy. To elucidate the complex structure of the terpolymer, 2D-1H/13C-heteronuclear single quantum coherence (HSQC) and heteronuclear multiple bond correlation (HMBC) experiments were conducted by selectively exciting the enhanced resonances in the spectra of two polymer samples, one polymer resulting from synthesis with 1-13C-n-butylacrylate monomer and a second polymer obtained from a synthesis with 2-13C-n-butylacrylate monomer. High-resolution 2D-NMR combined with 13C-labeling of the polymer greatly simplifies the 2D-NMR spectra, selectively enhances the weak peaks from low occurrence B-centered triad structures, and aids in their resonance assignments. In all experiments, the sample temperature was 120 degrees C, to ensure a homogeneous solution and sufficient molecular mobility. Electronic Supplementary Material: Supplementary material (1D 13C NMR spectra of the 13C-labeled and unlabeled polymers) is available in the online version of this article at http://dx.doi.org/100.1007/s00216-003-2402-3.     

Pentadienyls vs cyclopentadienyls and reversal of metal-ligand bonding affinity with metal oxidation state: synthesis, molecular structures, and electronic structures of high-valent zirconium pentadienyl complexes

Molecules of the form Cp(6,6-dmch)ZrX(2) (Cp = eta(5)-cyclopentadienyl, X = Cl, Br, I; 6,6-dmch = eta(5)-6,6-dimethylcyclohexadienyl) have been synthesized, and the molecular and electronic structures have been investigated. These molecules allow direct comparison of the bonding and properties of pentadienyl and cyclopentadienyl ligands in the same high-oxidation-state metal complexes. Unlike the well-known Cp(2)ZrX(2) analogues, these Cp(6,6-dmch)ZrX(2) molecules are intensely colored, indicating significantly different relative energies of the frontier orbitals. Also unusual, the average Zr-C distances to the 6,6-dmch pentadienyl ligand are about 0.1 A longer than the average Zr-C distances to the cyclopentadienyl ligand for these Zr(IV) complexes, opposite of what is observed for the Zr(II) complex Cp(2,6,6-tmch)Zr(PMe(3))(2) (tmch = eta(5)-2,6,6-trimethylcyclohexadienyl), reflecting a dramatic reversal in the favorability of the bonding depending on the metal oxidation state. The experimental and computational results indicate that the color of the Cp(6,6-dmch)ZrX(2) complexes is due to a 6,6-dmch ligand-to-metal charge-transfer band. Compared to the Cp(2)ZrX(2) analogues, the Cp(6,6-dmch)ZrX(2) molecules have a considerably less stable HOMO that is pentadienyl-based and an essentially unchanged metal-based LUMO. Also, the lowest unoccupied orbital of pentadienyl is stabilized relative to cyclopentadienyl and becomes a better potential delta electron acceptor, thus contributing to the differences in structure and reactivity of the low-valent and high-valent metal complexes.     

Reactions of [(Cp)2Ti(NCS)2] as a potential metalloligand; synthesis and physico-chemical investigations of novel heterobimetallic complexes

Summary Bis(cyclopentadienyl)titanium(IV) diisothiocyanate [(Cp)₂-Ti(NCS)₂] reacts with MCl₂ (M = Cu, Pd or Pt), [CuCl(PPh₃)₃], [RuCl₂(PPh₃)₃] and [RuCl₂(DMSO)₄] (DMSO = dimethylsulphoxide) giving solid compounds of stochiometry [(Cp)₂Ti(-NCS)₂MCl₂] (M = Cu, Pd or Pt), [(Cp)₂Ti(-NCS)₂CuCl(PPh₃)], [(Cp)₂Ti(-NCS)₂-RuCl(PPh₃)₂]Cl and [(Cp)₂Ti(-NCS)₂RuCl₂(DMSO)2]. These products have been characterized by physicochemical and spectroscopic methods.     

Mononuclear nitrogen/sulfur-ligated zinc methoxide and hydroxide complexes: investigating ligand effects on the hydrolytic stability of zinc alkoxide species

The synthesis and properties of mononuclear zinc methoxide ([(ebnpa)Zn-OCH3]ClO4) (1) and hydroxide ([(ebnpa)Zn-OH]ClO4) (2) complexes of a new mixed nitrogen/sulfur ligand (ebnpa = N-2-(ethylthio)ethyl-N,N-bis(6-neopentylamino-2-pyridylmethyl)amine) are reported. The structures of 1 and 2 were determined by X-ray diffraction. Each possesses a single zinc-coordinated anion (methoxide or hydroxide) and exhibits an overall trigonal bipyramidal geometry. Structural and spectroscopic studies indicate the presence of two hydrogen-bonding interactions involving the oxygen atom of the zinc-bound anion in each complex. Treatment of [(ebnpa)Zn-OH]ClO4 with CH3OH results in the formation of an equilibrium mixture of 1 and 2. 1H NMR spectroscopic methods were used to examine the equilibrium as a function of temperature, yielding KMe (304 K) = 0.30(8), DeltaHMe = -0.9(1) kcal/mol, and DeltaSMe = -5(1) eu. The negative enthalpy indicates that spontaneous zinc alkoxide formation from a hydroxide precursor occurs in this system at low temperature. Using the experimentally determined DeltaHMe value, we found the homolytic Zn-O bond dissociation energy (BDE) in the Zn-OCH3 unit to be approximately -14 kcal/mol relative to the Zn-O BDE in the Zn-OH unit.     

Self-assembly of flexible supramolecular metallacyclic ensembles: structures and adsorption properties of their nanoporous crystalline frameworks

The syntheses, structures, and N2 adsorption properties of six new supramolecular metallacycles are reported. Flexible ditopic linkers, 1-4, with systematically varied lengths and conformational degrees of freedom were synthesized utilizing ester linkages. They were used in combination with (dppp)M(OTf)2, where M = Pt(II) and Pd(II), and cis-(Me3P)2Pt(OTf)2 to form flexible supramolecular metallacycles 5-10 in 88-98% isolated yields. Their structures were characterized via multinuclear NMR and X-ray crystallography. The metallacycles stack to form porous structures in the crystalline state. The pore dimensions depend on both the phosphorus ligands attached to the metals and the flexible linkers. Adsorption studies on the porous materials show that 5a, 6, 8, and 9 held 11.7, 16.5, 5.7, and 6.8 cm3/g STP of N2 at 77 K, respectively. A guest-exchange study with nitromethane and toluene reveals that the nanopore in 5 is flexible, a property which was transferred from the linker to the supramolecular structure in the solid state.     

Reversible carboxylation of N-heterocyclic carbenes

Spectroscopic analysis, thermogravimetric analysis, and crossover experiments performed on a series of imidazolium carboxylates revealed carboxylation was reversible with N-aryl substituted adducts.     

Structure and magnetic properties of tetraarylporphinatomagnesium(II) electron transfer salts of 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane,TCNQF4

The crystal structures of the 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane, TCNQF(4), electron transfer salts of meso-tetraphenylporphinatomagnesium(II), [MgTPP][TCNQF(4)].PhMe and [MgTPP][TCNQF(4)].3(1,2-C(6)H(4)Cl(2)), and meso-tetrakis(3,4,5-trimethoxyphenyl)porphinatomagnesium(II), [MgT(3,4,5-OMe)PP][TCNQF(4)].3(1,2-C(6)H(4)Cl(2)), provide the first structurally characterized examples of 1-D metal-radical chains involving [Mg(II)(porphyrin(*))](+). These salts possess [TCNQF(4)](*-) stabilized by trans-mu-coordination to Mg(II) and exhibit nu(CN) at 2199 and 2177, 2212 and 2187, and 2194 and 2172 cm(-1), respectively. The [TCNQF(4)](*-) species is planar and bridges two cations with MgN distances of 2.266(16), 2.221(2), and 2.276(3) A, respectively, which are shorter than the MnN 2.321(3) A distance observed for [MnT(3,4,5-OMe)PP][TCNQF(4)].3(1,2-C(6)H(4)Cl(2)). The room-temperature effective moments for [MgTPP][TCNQF(4)].xS (S = PhMe and 1,2-C(6)H(4)Cl(2)) and [MgTPP][C(4)(CN)(6)].PhMe are consistent with the calculated spin only value of 2.45 micro(B) with weak antiferromagnetic coupling (J(intra)/k(B) approximately -2.9 K; H = -2JSa.Sb) for these [TCNQF(4)](*-) salts and for this [C(4)(CN)(6)](*-) salt (J(intra)/k(B) approximately -0.8 K) on the basis of fits to several models. The coupling is significantly reduced with respect to that of the Mn analogues due to lack of spin on the metal site for [Mg(II)(por(*))](+). The antiferromagnetic coupling is enhanced for [MgT(3,4,5-OMe)PP][TCNQF(4)] with respect to [MgTPP][TCNQF(4)] as [TCNQF(4)](*-) gets closer to the [Mg(II)(por(*))](+) plane, which leads to greater interactions and coupling.     

Determination of trace elements in coffee beans and instant coffee of various origins by INAA

Summary Extensive use of coffee, by one-third of world's population, entails the evaluation of trace element contents in it. Instrumental neutron activation analysis (INAA) was successfully employed to determine the concentration of 20 trace elements (essential, toxic and nonessential) in four samples of coffee beans of various origins and two instant coffee brands most commonly consumed in Pakistan. This study provides the base-line values of certain toxic and essential elements in coffee. The daily intake of essential and toxic elements through coffee was estimated and compared with the recommended values. The cumulative intake of Mn is four times higher than the recommended value and that of toxic elements is well below the tolerance limits.