Glutamate receptor incorporated in a mixed hybrid bilayer lipid membrane array, as a sensing element of a biosensor working under flowing conditions

The realization of a reliable receptor biosensor requires stable, long-lasting, reconstituted biomembranes able to supply a suitable biomimetic environment where the receptor can properly work after incorporation. To this end, we developed a new method for preparing stable biological membranes that couple the biomimetic properties of BLMs (bilayer lipid membranes) with the high stability of HBMs (hybrid bilayer membranes); this gives rise to an innovative assembly, named MHBLM (mixed hybrid bilayer lipid membrane). The present work deals with the characterization of biosensors achieved by embedding an ionotropic glutamate receptor (GluR) on MHBLM. Thanks to signal (transmembrane current) amplification, which is typical of natural receptors, the biosensor here produced detects glutamate at a level of nmol L(-1). The transmembrane current changes linearly vs glutamate up to 100 nmol L(-1), while the limit of detection is 1 nmol L(-1). In addition, the biosensor response can be modulated both by receptor agonists (glycine) and antagonists (Mg(2+)) as well, and by exploiting the biosensor response, the distribution of different kinds of ionotropic GluR present in the purified sample, and embedded in MHBLM, was also evaluated. Finally, one of the most important aspects of this investigation is represented by the high stability of the biomimetic system, which allows the use of biosensor under flowing conditions, where the solutions flow on both biomembrane faces.     

Behaviour of different eluents and stabilizing agents in the determination of sulphite in water by ion-chromatography

Ion-chromatography has been used for the determination of sulphite in water. The eluents were solutions of Na(2)CO(3) (1.1mM)-NaHCO(3) (1.4mM) or NaHCO(3) (1.0mM)-formaldehyde (0.2% w/w), and formaldehyde, glycerol or fructose was used as stabilizing agent. With the first eluent, fructose or glycerol can be used to stabilize samples against sulphite oxidation, but formaldehyde affects the peak height. On the other hand, formaldehyde can stabilize sulphite in the presence of Fe(III), whereas glycerol and fructose can not. If Fe(III) is present, the second eluent is used and sulphite is eluted directly as hydroxymethanesulphonate; formaldehyde will not then affect the peak height. This eluent allows a good peak separation and is suitable for the sulphite concentration range 0.1-12.0 mg/l.     

Eptastigmine,nicotinamide and nicotinic acid determination using an inhibition enzyme sensor; application to pharmaceutical analysis

An enzyme inhibition biosensor, developed in our laboratory and previously used for the analysis of compounds with anticholinesterase activity (e.g. physostigmine, neostigmine, pyridostigmine nicotine and organophosphorus compounds) has now been tested for the analysis of another recently synthesized cholinesterase inhibitor, i.e. eptastigmine. In addition nicotinic acid and nicotinamide, although displaying weaker inhibition properties, were also tested in pharmaceutical products using the same inhibition enzyme sensor. The biosensor consisted of a hydrogen peroxide amperometric electrode coupled to a functionalised nylon membrane chemically bonding both the enzymes butyrylcholinesterase and choline oxidase; a butyrylcholine standard solution in glycine buffer acted as substrate. The response of the system to all the inhibitors considered was characterised completely and the analysis of several pharmaceutical formulations containing nicotinamide or nicotinic acid was also performed.     

Metal-cinnamic acids interactions. Part III. Synthesis and study of copper(II) complexes of 3, 4- and 3, 5-dimenthoxycinnamic acid

Summary Copper(II) complexes derived from substituted cinnamic acids 3, 4-dimethoxycinnamic acid (3, 4-DMCH) and 3, 5-dimethoxycinnamic acid (3, 5-DMCH), of the formula [Cu(3, 4-DMC)₂]·H₂O (1), [Cu(3, 5-DMC)₂]·H₂O (2) were prepared. The magnetic properties of the complexes suggest dimeric structures typical of copper(II) acetate monohydrate-like complexes. X-band e.s.r. spectra of polycrystalline samples at low temperature are typical of triplet state systems S=1. Their ability to catalyze the aerial oxidation of 3, 5-di-t-butylcatechol was measured spectrophotometrically at 30°C. The complexes are models for oxidases.     

Simultaneous determination of cysteine, cystine and 18 other amino acids in various matrices by high-performance liquid chromatography

An extraction protocol and a reversed-phase high-performance liquid chromatographic method for the simultaneous determination of cysteine, cystine and 18 other amino acids in biological and vegetable samples are described. Among the different methods proposed for amino acid determination, phenylisothiocyanate was used as the reagent for derivatization. Chromatograms obtained in the analysis of standard solutions and actual samples are reported, together with regression equation, correlation coefficient (> 0.999 for all), limit of detection and recoveries (between 86 and 102% for all the examined matrices) for each amino acid. Practical protocol and method applications in normal patients and patients affected by different pathologies, and in algal products are discussed.     

Mixed hybrid bilayer lipid membrane incorporating valinomycin: improvements in preparation and functioning

The paper deals with the reconstruction of lipid bilayer membranes on a Au-covered polycarbonate membrane. Such a kind of like-biomembranes (namely mixed hybrid bilayer lipid membrane (MHBLM)) are characterised by appreciable long-term stability. Here we describe changes that have been made in the geometry of the experimental device in order to avoid artefacts and render membrane reproduction easier. Incorporation of valinomycin was performed to check the membrane and its stability: conductance and membrane potential following the changes of ion concentration were recorded. This new approach permits increase of successful trials and renders possible, when it breaks, easily formation of a new MHBLM on the same Au-covered polycarbonate membrane support. Finally, the stability shown by the MHBLM renders this system a promising tool for use under flowing conditions.     

X-ray spectroscopic characterization of Cu2+-phenanthroline complexes intercalated in α-zirconium phosphate

X-ray photoelectron spectroscopy provides evidence that when [Cu(phen)₂]²⁺(phen = 1,10-phenanthroline) is diffused between the layers of -zirconium phosphate, the complex species does not remain intact after intercalation, but some Cu-N bonds are broken, replaced with Cu-O bonds and the released nitrogen atoms can now interact with the PO₃-OH groups of the host. XPS also provides evidence for coordination of the Cu²⁺ ions when they are diffused by ion exchange in the phenanthroline--zirconium phosphate intercalation compound. Although Cu²⁺ and phen are in a 1 : 1 molar ratio in the interlayer region of the host, so that a 1 : 1 coordination could be expected between the two species, the characteristic peaks of the uncoordinated phenanthroline, even though at a low intensity, are still present. The differences between the two Cu(II)-intercalation compounds are discussed.     

Certification of nitrate in spinach powder reference material SPIN-1 by high-precision isotope dilution GC–MS

A high-precision exact-matching quadruple isotope dilution method (ID⁴MS) was employed for the quantitation of nitrate in an air-dried spinach powder Certified Reference Material (CRM). The analyte was extracted in hot water following addition of ¹⁵NO\({}_{3}^{-}\) internal standard. The blend was then treated with sulfamic acid to remove nitrite and with triethyloxonium tetrafluoroborate to promote aqueous conversion of nitrate into volatile EtONO₂. The derivative was analyzed by headspace GC–MS with 3-min elution time. The method performance was validated with a series of tests which demonstrated adequate selectivity and ruggedness. This method supported the development of novel SPIN-1 CRM giving a modest contribution to its uncertainty (u_char = 0.85%). With respect to previous attempts, the SPIN-1 was proven stable, homogeneous (u_hom = 0.44%), and suitable for spinach monitoring under EU regulations. On dried basis, the nitrate content of SPIN-1 was found to be 22.53 ± 0.43 mg/g (U_c = 1.9%, k = 2). The material was also used in an inter-laboratory study where four laboratories employed a total of ten measurement methods.

SPIN-1 Certified Reference Material for nitrate in spinach powder

     

Synthesis,binding and fluorescence studies of a new neutral H-bonding receptor for anions based on 3,5-bis(trifluoromethyl)phenylurea

The synthesis and anion binding studies of the new neutral receptor 1,1′-(2,2′-(4,10-dimethyl-1,4,7,10-tetraazacyclododecane-1,7-diyl)bis(2-oxoethane-2,1-diyl))bis(3-(3,5-bis(trifluoromethyl)phenyl)urea) (L1) are reported. L1 is a macrocyclic ligand containing the 3,5-trifluoromethylphenylureido-binding fragment attached as a side arm on the tetraazacyclododecane. L1 is soluble in numerous organic solvents; the binding properties of L1 towards several simple anions (G) were investigated by NMR, UV–vis and fluorescence techniques in DMSO and CH₃CN solutions. L1 is able to bind F^? , Cl^?  and AcO^?  in both solvents; in addition, it binds Br^?  in CH₃CN. Fluoride shows the highest constant values in the halide series (F^?  > Cl^?  > Br^? ) and AcO^?  is the most strongly bound among all the anions investigated. L1 is able to signal the presence of the anions in solution by fluorescence change; in the case of acetate, this occurs in the visible range.