On a monotone iterative method for a class of three point nonlinear nonsingular BVPs with upper and lower solutions in reverse order

In this article we consider the following class of three point boundary value problem and use monotone iterative technique to derive some sufficient conditions of existence. Examples are included to illustrate the effectiveness of the proposed results. We consider both well ordered and reverse ordered upper and lower solutions.     

Effect of initial orientation on twinning in commercially pure titanium

Abstract

The effect of initial orientation on twinning micro-mechanisms during tensile deformation of commercially pure titanium has been studied using micro focus X-ray diffraction and electron back scatter diffraction (EBSD) in a scanning electron microscope. Three orientations A, B and C obtained from a rolled and annealed block of commercially pure titanium were deformed in uniaxial tension till failure and the tested specimens were characterised with regard to bulk texture, microstructure and crystal orientation mapping using EBSD. Orientation B along the transverse direction in ND-TD plane exhibits higher strength and lower strain hardening compared to orientations A and C along the rolling direction in TD-RD and ND-RD plane, respectively. This is attributed to different texture of sample B compared to samples A and C leading to dissimilar twinning micro-mechanisms and characteristic variation in nature of twinning. It is observed that limited twin nucleation and prominent lateral growth plays a dominant role in orientation B while multiple twin nucleation with significant non-Schmid behaviour is dominant for the other two orientations. It is proposed from this study that conventional factors associated with twin formation like Schmid factor play a main role in twin nucleation and propagation, however, growth or lateral thickening of the twins is explained by elastic stiffness variation across twins and their parent grains.     

Gravity modulation study on opposed flame spread over thin solid fuels

In this work a numerical investigation has been carried out to study the effect of g-jitter on zero-gravity (0g_e) opposed flow spreading flame over thin solid fuels. For comparison simulations have also been carried out for normal gravity (1g_e) downward spreading flames. G-jitter is emulated by gravity modulation of sinusoidal (A_ge sin(2πt/T_ge)) gravity perturbation (g-perturbation) of a particular time-period (T_ge) and amplitude (A_ge) over a selected base gravity level (0g_e or 1g_e). The response of flames at 0g_e base gravity and at 1g_e base gravity was different to the imposed g-perturbation. While at 0g_e the mean and the amplitude of the oscillatory flame spread rate (FSR) magnified with increase in the time period of g-perturbation, interestingly for the 1g_e flame a maximum mean FSR and oscillation amplitude occurs at certain perturbation time period. Further, at very small perturbation time-periods (T_ge) the FSR at 1g_e was lower than the steady state FSR. The amplitude of oscillatory FSR increased with increase in perturbation amplitude (A_ge). However, the 0g_e flame which is little affected (compared to 1g_e flame) at small perturbation amplitude (A_ge) is affected severely at large perturbation amplitude (A_ge). Both the gas phase and fuel pyrolysis (or fuel response) follow perturbation signal with a lag but fuel pyrolysis is more sluggish and lags behind gas phase. The phase lag between fuel pyrolysis and gas increases at smaller time-periods (T_ge) and tends to enhance the effect of external perturbation whereas at larger time-periods (T_ge) this lag inhibits the effect of external perturbation.     

Quench dynamics of edge states in 2-D topological insulator ribbons

We study the dynamics of edge states of the two dimensional BHZ Hamiltonian in a ribbon geometry following a sudden quench to the quantum critical point separating the topological insulator phase from the trivial insulator phase. The effective edge state Hamiltonian is a collection of decoupled qubit-like two-level systems which get coupled to bulk states following the quench. We notice a pronounced collapse and revival of the Lochschmidt echo for low-energy edge states illustrating the oscillation of the state between the two edges. We also observe a similar collapse and revival in the spin Hall current carried by these edge states, leading to a persistence of its time-averaged value.     

Microwave‐Assisted Synthesis and Antituberculosis Screening of Some 4‐((3‐(Trifluoromethyl)‐5,6‐dihydro‐[1,2,4]triazolo[4,3‐a]pyrazin‐7(8H)‐l)methyl)benzenamine Hybrids

In the present investigation, a series of 4‐((3‐(trifluoromethyl)‐5,6‐dihydro‐[1,2,4]triazolo[4,3‐a]pyrazin‐7(8H)‐yl)methyl)benzenamine analogs 6a–o were synthesized and characterized by IR, NMR (¹H and ¹³C), and mass spectra. All newly synthesized compounds 6a–o were prepared under conventional and microwave irradiation methods. These compounds obtained in higher yields and in shorter reaction times in the microwave irradiation method when compared with the conventional method. Synthesized compounds 6a–o were inspected for their in vitro antitubercular activity against Mycobacterium tuberculosis H₃₇Ra using an established XTT reduction menadione assay. Among the screened compounds, 6i (IC₅₀: 1.82 μg/mL), 6j (IC₅₀: 1.02 μg/mL), and 6k (IC₅₀: 1.59 μg/mL) showed excellent activity. Furthermore, compound 6i showed MIC₉₀ value of 16.02 μg/mL. In summary, the results indicate the identification of some novel, selective, and specific inhibitors against M. tuberculosis that can be explored further for the potential antitubercular drug.     

A Garratt-Braverman cyclization route towards the synthesis of phenanthridine derivatives and their DNA-binding studies

Garratt-Braverman cyclization has been employed to synthesize a series of dihydroisofuran fused phenanthridine derivatives. The established protocol proposes a simpler synthetic alternative to have access to these therapeutically relevant cytotoxic scaffolds. Single crystal X-ray data unambiguously confirmed the structures of the synthesized phenanthridine derivatives. UV–Vis absorption titration with calf-thymus DNA followed by fluorescence-based competitive ethidium bromide displacement assay established the synthesized target compounds as potent DNA-intercalating agents with intrinsic binding constant of the range 10³-10⁵. Results obtained from the molecular docking further justified the spectroscopically obtained results.     

A Singular System with Precise Dosing and Spatiotemporal Control of CRISPR‐Cas9

Several genome engineering applications of CRISPR‐Cas9, an RNA‐guided DNA endonuclease, require precision control of Cas9 activity over dosage, timing, and targeted site in an organism. While some control of Cas9 activity over dose and time have been achieved using small molecules, and spatial control using light, no singular system with control over all the three attributes exists. Furthermore, the reported small‐molecule systems lack wide dynamic range, have background activity in the absence of the small‐molecule controller, and are not biologically inert, while the optogenetic systems require prolonged exposure to high‐intensity light. We previously reported a small‐molecule‐controlled Cas9 system with some dosage and temporal control. By photocaging this Cas9 activator to render it biologically inert and photoactivatable, and employing next‐generation protein engineering approaches, we have built a system with a wide dynamic range, low background, and fast photoactivation using a low‐intensity light while rendering the small‐molecule activator biologically inert. We anticipate these precision controls will propel the development of practical applications of Cas9.     

Site‐Specific Encoding of Photoactivity in Antibodies Enables Light‐Mediated Antibody–Antigen Binding on Live Cells

Antibodies have found applications in several fields, including, medicine, diagnostics, and nanotechnology, yet methods to modulate antibody–antigen binding using an external agent remain limited. Here, we have developed photoactive antibody fragments by genetic site‐specific replacement of single tyrosine residues with photocaged tyrosine, in an antibody fragment, 7D12. A simple and robust assay is adopted to evaluate the light‐mediated binding of 7D12 mutants to its target, epidermal growth factor receptor (EGFR), on the surface of cancer cells. Presence of photocaged tyrosine reduces 7D12‐EGFR binding affinity by over 20‐fold in two out of three 7D12 mutants studied, and binding is restored upon exposure to 365 nm light. Molecular dynamics simulations explain the difference in effect of photocaging on 7D12‐EGFR interaction among the mutants. Finally, we demonstrate the application of photoactive antibodies in delivering fluorophores to EGFR‐positive live cancer cells in a light‐dependent manner.     

Scaling behavior in on‐chip field‐amplified sample stacking

Field amplified sample stacking (FASS) uses differential electrophoretic velocity of analyte ions in the high‐conductivity background electrolyte zone and low conductivity sample zone for increasing the analyte concentration. The stacking rate of analyte ions in FASS is limited by molecular diffusion and convective dispersion due to nonuniform electroosmotic flow (EOF). We present a theoretical scaling analysis of stacking dynamics in FASS and its validation with a large set of on‐chip sample stacking experiments and numerical simulations. Through scaling analysis, we have identified two stacking regimes that are relevant for on‐chip FASS, depending upon whether the broadening of the stacked peak is dominated by axial diffusion or convective dispersion. We show that these two regimes are characterized by distinct length and time scales, based on which we obtain simplified nondimensional relations for the temporal growth of peak concentration and width in FASS. We first verify the theoretical scaling behavior in diffusion‐ and convection‐dominated regimes using numerical simulations. Thereafter, we show that the experimental data of temporal growth of peak concentration and width at varying electric fields, conductivity gradients, and EOF exhibit the theoretically predicted scaling behavior. The scaling behavior described in this work provides insights into the effect of varying experimental parameters, such as electric field, conductivity gradient, electroosmotic mobility, and electrophoretic mobility of the analyte on the dynamics of on‐chip FASS.     

Consistency and variations in optical characteristics of four-layer polymeric waveguides

In the present work, four-layer polymeric waveguides have been fabricated and characterized by interchanging the film layer. Using polyvinyl alcohol (PVA) and styrene acrylonitrile (SAN) polymer it has been shown that polymers do not loose their own property in multilayer structure and better efficiency can be achieved in the form of low propagation losses and mode filtration. Due to high contrast of PVA and SAN films, a broad spectrum of refractive index in four-layer structure has been achieved.