Enantioselective synthesis of nitroalkanes bearing all-carbon quaternary stereogenic centers through Cu-catalyzed asymmetric conjugate additions

The first examples of catalytic asymmetric conjugate addition (ACA) of alkylzinc reagents to trisubstituted nitroalkenes, leading to the formation of nitroalkanes bearing a quaternary carbon stereogenic center, are reported. Reactions are promoted in the presence of 4 mol % of a readily available amino acid-based phosphine and 2 mol % (CuOTf).C6H6. Cu-catalyzed reactions proceed efficiently in up to 98% ee and can be carried out with a variety of dialkylzinc reagents and trisubstituted nitroolefins. We highlight the synthetic utility of the products obtained by efficient conversion of optically enriched nitroalkanes to the corresponding carboxylic acids.     

Solid phase extraction of gold by sorption on octadecyl silica membrane disks modified with pentathia-15-crown-5 and determination by AAS

A simple and selective method for rapid and efficient concentration and determination of μg l⁻¹ levels of Au(III) ions in aqueous solution using octadecyl silica membrane disks modified by pentathia-15-crown-5 and flame atomic absorption spectrometry is presented. The influence of flow rates of eluent and sample solution, amount of ligand, types and least amount of eluent for elution of Au from disks were investigated. Break through volume and limit of detection of the membrane disks modified by 5 mg of the thiacrown ether was found to be 2.0 l and 1.0 μg l⁻¹, respectively. The effects of various cationic interferences on percent recovery of gold were studied. The method was successfully applied for the determinations of gold in some pharmaceutical samples and for the recovery of trace Au³⁺ ions from synthetic and water samples.     

Olefins turned alkylating agents: diastereoselective intramolecular Zr-catalyzed olefin alkylations

The first examples of intramolecular Zr-catalyzed electrophilic alkylation of aryl olefins are disclosed. Substituted carbo- and heterocycles are prepared efficiently and diastereoselectively.     

Solvent extraction of mercury using Alamine 304

Summary A study has been undertaken to develop a solvent extraction system for mercury using Alamine 304 in aqueous chloride medium. The parameters investigated included reagent concentration, acid concentration, pH, aqueous to organic phase ratio, and rate of extraction and stripping. The study shows that mercury can be extracted rapidly and efficiently from aqueous chloride solutions. A number of aqueous stripping reagents removed more than 90% of the mercury from the organic phase with only one equilibrium. These include HNO₃, NaOH and EDTA.

---

Extraktion von Quecksilber mit Alamin 304

Zusammenfassung Die Extraktion von Quecksilber aus der wäßrigen Lösung des Chlorids mit Alamin 304 wurde untersucht. Die Konzentration des Reagens, der Säure, das pH, das Verhältnis der wäßrigen zur organischen Phase sowie das Extraktionsverhältnis wurden geprüft. Die Extraktion verläuft rasch und wirkungsvoll. Eine Reihe wäßriger Reagenzien entzieht mehr als 90% des Quecksilbers aus der organischen Phase. Dazu gehören Salpetersäure, Natronlauge und EDTA.

     

Fused quinoline heterocycles VI: Synthesis of 5H‐1‐thia‐3,5,6‐triazaaceanthrylenes and 5H‐1‐thia‐3,4,5,6‐tetraazaaceanthrylenes

Ethyl 3‐amino‐4‐chlorothieno[3,2‐c]quinoline‐2‐carboxylate ( 4 ) is a versatile synthon, prepared by reacting an equimolar amount of 2,4‐dichloroquinoline‐3‐carbonitrile ( 1 ) with ethyl mercaptoacetate ( 2 ). Ethyl 5‐alkyl‐5H‐1‐thia‐3,5,6‐triazaaceanfhrylene‐2‐carboxylates 9a‐c , novel perianellated tetracyclic heteroaro‐matics, were prepared by refluxing 4 with excess of primary amines 7a‐c to yield the corresponding amino‐thieno[3,2‐c]quinolines 8a‐c . Subsequent reaction with an excess of triethyl orthoformate (TEO) furnished 9a‐c . Reaction of 4 with TEO in Ac₂O at reflux, gave the simple acetylated compounds, thieno[3,2‐c]‐quinolines 12 and 13 . Refluxing 4 with benzylamine ( 7d ) gave 10 , and subsequent treatment with TEO gave the tetracyclic compound 11 . Refluxing 13 with an excess of alkylamines 7a‐d gave the fhieno[3,2‐c]quino‐lines 15 . Refluxing the aminothienoquinolines 8b with an excess of triethyl orthoacetate gave thieno[3,2‐c]quinoline 17 , while heating with Ac₂O gave 18 and 19 , with small amounts of 16 . Reaction of 8a,b with ethyl chloroformate and phenylisothiocyanate generated the new 1‐thia‐3,5,6‐triazaaceanthrylenes 20a,b and 21a,b , respectively. Diazotization of 8a‐c afforded the novel tetracyclic ethyl 5‐alkyl‐5H‐1‐fhia‐3,4,5,6‐tetraazaaceanthrylene‐2‐carboxylates 22a‐c in good yields.     

Zein film as a novel natural biopolymer membrane in electrochemical detections

Permselective modifier films are very important in preparing highly sensitive electrochemical sensors. In this work, for the first time, the behavior of gold and glassy carbon electrodes coated with biocompatible zein film as a permselective membrane for the electrochemical detection of various compounds has been investigated. For this purpose, several electroactive cationic (methylene blue, brilliant green, and thionine) and anionic (potassium ferricyanide, alizarin red S, and riboflavin-5’-phosphate) compounds have been used as model. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) showed that zein membranes prepared from casting solution containing 1% zein in ethanol/water have porous structures with high nanometric roughness. The capacitance values of electrical double layers of electrodes modified with zein film were very high for hydrophilic ions in comparison with hydrophobic ions. Point of zero charge pH (pH_pzc) of zein membrane was 4.8. The results of cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) as well as pH_pzc study indicated that zein permselective membrane acts as ion exchanger film for selected cationic compounds with fast electrochemical kinetics responses in aqueous solution (pH=7). This behavior was confirmed by circulating solutions containing model compounds from homemade continuous cell equipped with polyamide membranes modified with zein film.

Graphical Abstract

     

The role of charge distribution on the antimalarial activity of artemisinin analogues

In this work the calculated nuclear quadrupole coupling constants (NQCC; chi) of 17O in artemisinin and some of its derivatives and the effects of charge density due to the nature of ligands on NQCC of 17O were investigated. All calculations were performed at the HF/3-21G level using the Gaussian 98 program. The results show that the O-O linkage has a characteristic role in the antimalarial activity of artemisinin. In addition, various substitutions on C4 change the charge density on these oxygens and consequently change the pharmaceutical effect of artemisinin. Our results suggest that due to a larger charge density on O1, the heme iron approaches the endoperoxide moiety at the O1 position with preference to the O2 position.     

A novel ion selective membrane potentiometric sensor for direct determination of Fe(III) in the presence of Fe(II)

A new PVC membrane potentiometric sensor that is highly selective to Fe(III) ions was prepared by using 2-[(2-hydroxy-1-propenyl-buta-1,3-dienylimino)-methyl]-4-p-tolylazo-phenol [HPDTP] as a suitable carrier. The electrode exhibits a linear response for iron(III) ions over a wide concentration range (3.5 × 10⁻⁶ to 4.0 × 10⁻²) with a super Nernstian slope of 28.5 (±0.5) per decade. The electrode can be used in the pH range from 4.5 to 6.5. The proposed sensor shows fairly a good discriminating ability towards Fe³⁺ ion in comparison to some hard and soft metals such as Fe²⁺, Cd²⁺, Cu²⁺, Al³⁺ and Ca²⁺. It has a response time of <15 s and can be used for at least 2 months without any measurable divergence in response characteristics. The electrode was used in the direct determination of Fe³⁺ in aqueous samples and as an indicator electrode in potentiometric titration of Fe(III) ions.     

Copolyesterification between poly(butylene terephthalate), terephthalic acid and hydroquinone diacetate: a kinetic analysis

The kinetics of liquid crystalline copolyester synthesis via melt transesterification between poly(butylene terephthalate) (PBT), terephthalic acid (TA) and hydroquinone diacetate (HQDA) is examined. Two different copolyester compositions PBT30/(HQDA+TA) 70 and PBT 50/(HQDA+TA) 50 mol% ratio were synthesized. The ratio of HQDA to TA was kept constant for all the reactions.The copolyesters were synthesized via melt polycondensation route at 265°C, 275°C and 285°C using two different transesterification catalysts, zinc acetate and dibutyl tin oxide. A key postulation assumed in this work is that the reaction originates between TA and HQDA to form a dimer which slices PBT chain. The copolyesterification rate constant for a system containing butylene glycol a more nonpolar moiety compared to ethylene glycol in poly(ethylene terephthalate) has been determined. The activation energy values for the different copolymer systems has also been determined. The rate constants for the uncatalyzed and catalyzed copolyesterification reaction and the activation energy values for the reaction have been determined.     

Theoretical analysis of the performance of a model supercapacitor consisting of metal oxide nano-particles

The factors influencing the electrochemical behaviour of a supercapacitor have been partly examined in this work. The effects of so-called intrinsic parameters, i.e. exchange current density, unit cell length and double layer (DL) capacitance; as well as the so-called application parameters, i.e. cell current, on the cell potential discharge time have been considered. The contributions of each type of capacitors, DL capacitor and faradaic supercapacitor under various states of operation and material have been analyzed, and the competing (compensating) effects of the two types of capacitors as regards to the discharge and power characteristics manifested by current–potential and energy–power (Ragone plots) are elucidated.