Effect of γ-irradiation on the catalytic activity and selectivity of γ-alumina II. Conversion of isopropanol

The catalytic conversion of isopropanol was conducted over a poorly crystalline -alumina irradiated with different doses of -rays (25–150 Mrad). The catalytic reaction was carried out at 180–400°C in a flow technique under atmospheric pressure. The results showed that the dose of 25 Mrad resulted in a decrease of about 50% of the dehydration activity which suffered a further slight decrease upon irradiation at a dose of 50 Mrad. Increasing the dose in the range of 50–150 Mrad effected an increase in the dehydration activity reaching a maximum limit at 100 Mrad, then decreased abruptly by a dose of 150 Mrad. -irradiation led also to creation of some active sites contributing in dehydrogenation of isopropanol to producing acetone. These results were discussed in terms of removal of Brönsted acidity (25–50 Mrad), responsible for the dehydration reaction and to transformation of Lewis to Brönsted acidity (100 Mrad) by the action of liberated water from the dehydration reaction. The drop in dehydration activity due to irradiation at 150 Mrad might result from an efficient removal of the Brönsted acid sites created. The induced dehydrogenation activity of irradiated aluminas was attributed to creation of some electron-donor centers.     

Exploring the structural aspects of ureido-amino acid-based APN inhibitors: a validated comparative multi-QSAR modelling study

ABSTRACT

The zinc-dependent enzyme aminopeptidase N (APN) is a member of the M1 metalloenzyme family. The multi-functionality of APN as a peptidase, a receptor and a signalling molecule has provided it the access to influence a number of disease conditions namely viral diseases, angiogenesis, cellular metastasis and invasion including different cancer conditions. Hence, the development of potent APN inhibitors is a possible route for the treatment of diseases related to the activity of APN. In this study, different QSAR approaches have been adopted to identify the structural features of a group of hydroxamate-based ureido-amino acid derivative APN inhibitors. This study was able to identify different constitutional aspects of these APN inhibitors which are important for their inhibitory potency. Additionally, some of these observations were also aligned with the observations of previously performed QSAR studies conducted on different APN inhibitors. Therefore, the results of this study may help to design potent and effective APN inhibitors in the future.     

Ethylene Conversion to Higher Hydrocarbon over Copper Loaded BZSM-5 in the Presence of Oxygen

The successful production of higher hydrocarbons from methane depends on the stability or the oxidation rate of the intermediate products. The performances of the BZSM-5 and the modified BZSM-5 catalysts were tested for ethylene conversion into higher hydrocarbons. The catalytic experiments were carried out in a fixed-bed micro reactor at atmospheric pressure. The catalysts were characterized using XRD, NH3-TPD, and IR for their structure and acidity. The result suggests that BZSM-5 is a weak acid. The introduction of copper into BZSM-5 improved the acidity of BZSM-5. The conversion of ethylene toward higher hydrocarbons is dependent on the acidity of the catalyst. Only weaker acid site is required to convert ethylene to higher hydrocarbons. The loading of Cu on BZSM-5 improved the selectivity for higher hydrocarbons especially at low percentage. The reactivity of ethylene is dependent on the amount of acidity as well as the presence of metal on the catalyst surface. Cu1%BZSM-5 is capable of converting ethylene to higher hydrocarbons. The balances between the metal and acid sites influence the performance of ethylene conversion and higher hydrocarbon selectivity. Higher loading of Cu leads to the formation of COx.     

Thermal stability of poly(vinyl bromide) and copolymers of vinyl bromide with methyl vinyl ketone

Thermal stability and degradation behaviour have been studied for PVB and VB-MVK copolymers spanning the whole composition range, using thermogravimetric analysis. The reactivity ratios in the radial copolymerization were determined by using an NMR technique, leading to r_i(VB) = 3.6 ± 0.2 and r₂(MVK) = 0.2 ± 0.1. The introduction of MVK units into the VB chain leads to an interaction with release of methyl bromide. The stability of the copolymers increases with increasing MVK concentration.     

A Highly Abbreviated Synthesis of Dibenzo[def,p]chrysene and Its 12-Methoxy Derivative, a Key Precursor for the Synthesis of the Proximate and Ultimate Carcinogens of Dibenzo[def,p]chrysene

Dibenzo[def,p]chrysene (DBC) (1), is by far the most mutagenic and toxic polycyclic aromatic hydrocarbon identified. Its metabolic activation leads to trans-11,12-dihydroxy-11,12-dihydro-DBC (2), which is further metabolized to the ultimate metabolite, anti-trans-11,12-dihydroxy-13,14-epoxy-11,12,13,14-tetrahydro-DBC (3), that binds to DNA causing mutations and ultimately tumor induction. We report a facile route for the syntheses of DBC (1) and its 12-methoxy derivative (12-methoxy-DBC) (13), a key intermediate for the synthesis of 2 and 3, using a Suzuki cross-coupling approach.     

Utility of oxidation-reduction reaction for the determination of ranitidine hydrochloride in pure form,in dosage forms and in the presence of its oxidative degradates

Three simple, accurate and sensitive colorimetric methods (A, B and C) for the determination of ranitidine HCl (RHCl) in bulk sample, in dosage forms and in the presence of its oxidative degradates are described. The first method A is based on the oxidation of the drug by N-bromosuccinimide (NBS) and determination of the unreacted NBS by measurement of the decrease in absorbance of amaranth dye (AM) at a suitable lambda(max)=520 nm. The methods B and C involve the addition of excess Ce(4+) and determination of the unreacted oxidant by decrease the red color of chromotrope 2R (C2R) at a suitable lambda(max)=528 nm for method B or decrease the orange pink color of rhodamine 6G (Rh6G) at a suitable lambda(max)=526 nm for method C. Regression analysis of Beer-Lambert plots showed good correlation in the concentration ranges 0.2-3.6, 0.1-2.8 and 0.1-2.6 microg ml(-1) for methods A, B and C, respectively. The apparent molar absorptivity. Sandell sensitivity, detection and quantitation limits were calculated. For more accurate results, Ringbom optimum concentration ranges were 0.3-3.4, 0.2-2.6 and 0.2-2.4 microg ml(-1) for methods A, B and C, respectively. Analyzing pure and dosage forms containing RHCl tested the validity of the proposed methods. The relative standard deviations were 相似文献   

Effect of thermal treatment on the structure and texture of differently impregnated NiO/SiO2 catalysts

NiO/SiO₂ catalysts were prepared with Ni contents ranging from 2–15% using a microporous silica support at pH ~11.5. The role of the method of preparation on the resulting catalyst is also investigated. Structural and textural changes were followed using X-ray diffraction, TG and DTA techniques—the surface area measurements were carried out on the parent catalysts and those produced in the temperature range 250–1000°C.Impregnation of the silica gel in the nickel ammine complex solution (catalyst series 1N–4N) with subsequent drying at 80°C overnight produced crystalline catalysts with two distinct peaks at d-spacings of 2.035 and 2.349 Å resulting from a surface silicate. This is easily destroyed by thermal treatment at 250°C for Ni contents ? 10% but is stable to this temperature for the higher Ni content. Drying the catalyst at room temperature (3N_b) gives rise to an amorphous product. A non-crystalline catalyst is also obtained when concentrated ammonia solution is added to the adsorbed nickel salt (3N_c). At high Ni content, the hydroxo ligand becomes significant and results in a surface compound in which one silanol group is attacked. This gives rise to a crystalline product at 500°C with characteristic d-spacings at 2.201 and 2.049 Å which, subsequently, produces a poorly crystalline NiO product at 1000°C. The presence of this hydroxo ligand is manifested by a small endotherm at 260°C.At Ni contents below 15% but greater than 2% a small exotherm is observed at ~ 500°C resulting from a reduction process. Entrained SO₄^2? ions present as an impurity are evolved at temperatures & > 750°C and can be estimated by TG analysis.The specific surface area decreases with Ni contents ? 5% but increases for higher Ni contents. Catalyst samples containing 15% Ni possess the highest specific area at all temperatures.Pore structure analysis showed that microporosity increased with increase in Ni content for the catalyst series 1N–4N. Samples from preparations 3N_b and 3N_c showed more mesoporosity than that of 3N. Thermal treatment causes widening of the pores for catalysts 1N–3N becoming predominantly mesoporous, co-existing with some micropores. Catalyst samples with 15% Ni remained predominantly microporous-mesoporosity increasing only at 1000°C.     

Synthesis and Characterization of Biologically Potent Di‐organotin(IV) Complexes of Mono‐Methyl Glutarate

The synthesis and characterization of some novel compounds of organotin(IV) chlorides with monomethyl glutarate is reported; the ligand molecule appears to be bound to the tin atom through the carbonyl oxygen. The results obtained through ¹H‐¹³C‐¹¹⁹Sn NMR, FT‐IR and ¹¹⁹Sn Mössbauer spectra show that the diorganotin(IV) complexes have hexacoordination with octahedral geometry. Biological screening of the complexes reveals that the diorganotin(IV) complexes show significant activity against all microorganisms.     

Aluminium-doped LiFePO4 single crystals. Part II. Ionic conductivity, diffusivity and defect model

We report on lithium ion conductivity and diffusivity along major crystallographic directions of Al-doped LiFePO4 single crystals. Impedance spectroscopy as well as galvanostatic polarization measurements have been carried out on the electronically blocking symmetric cell LiAl/LiI/LiFe(Al)PO4/LiI/LiAl. Neither ionic conductivity nor lithium diffusivity show anisotropy in the bc planes within the experimental error, but much lower values in the a-direction. Similar features were observed earlier by us for the pure single-crystal and the Si-doped single crystal. On Al-doping the ionic conductivity has increased while the electronic conductivity has decreased compared to undoped LiFePO4. Not only this donor doping effect but also the temperature dependence of ionic conductivity and of lithium-diffusivity are successfully interpreted in terms of lithium vacancies, holes and associates in the framework of a detailed defect chemical analysis. Ion-electron as well as ion-ion associates play a significant role in this system.     

Chelate formation and stability analysis of cobalt,nickel and copper with lomatiol

The pH-metric studies on the interaction of divalent metal cations, Co (II), Ni (II) and Cu (II) with lomatiol have been performed under the thermodynamic conditions achievable at constant ionic strength and infinite dilution in which a mole of divalent metal, combined with 02 mol of lomatiol. Lomatiol being bidentate could replace two water molecules at a time. The values of stepwise formation constants showed no conspicuous difference at 25 °C and 35 °C, and the complexes, registered a decrease in their stability values suggesting the low temperature as a favorable condition under which the chelation of metal with lomatiol is feasible. The reaction takes place without the use of any specific catalyst although under alkaline conditions. The reactions of lomatiol with metal cations in solution had been adjudged as the spontaneous reaction on account of the negative ΔG value in all the metal lomatiol systems. Also the study showed the positive experimental values of entropy changes in all the systems and negative value of free energy. The continuous fall in the values of the stepwise formation constants (k₁ > k₂ > k₃) in the divalent metal-lomatiol system has been assigned to the statistical factor.