Imidazole and imidazolium porphyrins: gas‐phase chemistry of multicharged ions

Electrospray ionization mass spectrometry/mass spectrometry in the positive ion mode was used to investigate the gas‐phase chemistry of multicharged ions from solutions of porphyrins with 1,3‐dimethylimidazolium‐2‐yl (DMIM) and 1‐methylimidazol‐2‐yl (MIm) meso‐substituents. The studied compounds include two free bases and 12 complexes with transition metals (Cu(II), Zn(II), Mn(III), and Fe(III)). The observed multicharged ions are either preformed or formed during the electrospraying process by reduction or protonation and comprise closed‐shell and hypervalent mono‐radical and bi‐radical ions. The observed extensive and abundant fragmentation of the DMIM and MIm meso‐substituents is a characteristic feature of these porphyrins. Fragments with the same mass values can be lost from the meso‐substituents either as charged or neutral species and from closed‐shell and hypervalent radical ions. Reduction processes are observed for both the free bases and the metallated DMIM porphyrins and occur predominantly by formation of hypervalent radicals that fragment, at low energy collisions, by loss of methyl radicals with formation of the corresponding MIm functionalities. These findings confirm that, when using electrospray ionization, reduction is an important characteristic of cationic meso‐substituted tetrapyrrolic macrocycles, always occurring when delocalization of the formed hypervalent radicals is possible. For the Fe(III) and Mn(III) complexes, reduction of the metal centers is also observed as the predominant fragmentation of the corresponding reduced ions through losses of charged fragments testifies. The fragmentation of the closed‐shell ions formed by protonation of the MIm porphyrins mirrors the fragmentation of the closed‐shell ions of their DMIM counterparts. Copyright © 2014 John Wiley & Sons, Ltd.     

Multi-walled carbon nanotubes functionalized with triethylenetetramine as fillers to enhance epoxy dimensional thermal stability

Multi-walled carbon nanotubes (MWCNT) have been used as fillers to improve thermal properties such as glass transition temperature (T _g) of epoxy materials. In this work, nanocomposites based on diglycidyl ether of bisphenol A resin and triethylenetetramine (TETA) were prepared by a three-roll mill process with TETA-functionalized (MWCNT–COTETA) and neat MWCNT. Thermogravimetric analysis of the nanofillers showed that in the case of MWCNT–COTETA, there is a 15 % mass loss that can be attributed to –COTETA and residual oxygen-containing functional groups. The influence of chemical modification on the behavior of the glass T _g was evaluated by dynamic scanning calorimetry. The MWCNT–COTETA allowed a ~20 °C reproducible increase of T _g in concentrations in the range of 0.5–1.0 mass%. Furthermore, images obtained by scanning electron microscopy were used to investigate the morphology of the polymer matrix and its interfaces. The quality of the dispersion and interaction of the nanotubes in the epoxy matrix was assessed from the images. Both the neat epoxy and the nanocomposite with MWCNT showed low thermal shrinkage upon curing.     

Yeast Biomass Production in Brewery’s Spent Grains Hemicellulosic Hydrolyzate

Yeast single-cell protein and yeast extract, in particular, are two products which have many feed, food, pharmaceutical, and biotechnological applications. However, many of these applications are limited by their market price. Specifically, the yeast extract requirements for culture media are one of the major technical hurdles to be overcome for the development of low-cost fermentation routes for several top value chemicals in a biorefinery framework. A potential biotechnical solution is the production of yeast biomass from the hemicellulosic fraction stream. The growth of three pentose-assimilating yeast cell factories, Debaryomyces hansenii, Kluyveromyces marxianus, and Pichia stipitis was compared using non-detoxified brewery’s spent grains hemicellulosic hydrolyzate supplemented with mineral nutrients. The yeasts exhibited different specific growth rates, biomass productivities, and yields being D. hansenii as the yeast species that presented the best performance, assimilating all sugars and noteworthy consuming most of the hydrolyzate inhibitors. Under optimized conditions, D. hansenii displayed a maximum specific growth rate, biomass yield, and productivity of 0.34 h⁻¹, 0.61 g g⁻¹, and 0.56 g l⁻¹ h⁻¹, respectively. The nutritional profile of D. hansenii was thoroughly evaluated, and it compares favorably to others reported in literature. It contains considerable amounts of some essential amino acids and a high ratio of unsaturated over saturated fatty acids.     

Reduction and adduct formation from electrosprayed solutions of porphyrin salts

The solutions of four meso-tetrakis(N-alkylpyridinium-4-yl)porphyrin salts and of the p-toluenesulfonate salt of meso-tetrakis(4-trimethylammoniumphenyl)porphyrin, in methanol, were studied by electrospray mass spectrometry, in order to investigate the influence of the type of counter ion, the length of the substituent N-alkyl groups of the four (N-alkylpyridinium-4-yl)porphyrins and the presence of an aromatic (alkylpyridinium) or aliphatic (trimethylammonium) nitrogen, in ion formation.In our experimental conditions, adducts with the counter ions were formed only for the meso-tetrakis(4-trimethylammoniumphenyl)porphyrin and were not observed for the other porphyrins, even when the counter ion was the same. In contrast, formation of reduced species, such as the [M(4+) + e(-)]3+, [M(4+) + 2e(-)]2+, [M(4+) + 4e(-) + 2H(+)]2+, and [M(4+) + 5e(-) + 2H(+)]+ ions was observed only for the (N-alkylpyridinium-4-yl)porphyrins and the appearance of these species is apparently solvent related and may occur via counter ion/solvent adducts.     

Early stages hydration of high initial strength Portland cement

Thermogravimetry (TG) and derivative thermogravimetry (DTG) were used to analyze the early stages of hydration of a high-initial strength and sulphate resistant Portland cement (HS SR PC) within the first 24 h of setting. The water/cement (W/C) mass ratios used to prepare the pastes were 0.35, 0.45, and 0.55. The hydration behavior of the pastes was analyzed through TG and DTG curves obtained after different hydration times on calcined cement mass basis to have a same composition basis to compare the data. The influence of the W/C ratio on the kinetics of the hydration process was done through the quantitative analysis of the combined water of the main hydration products formed in each case. TG and DTG curves data calculated on calcined mass basis of all the results were converted to initial cement mass basis to have an easier way to analyze the influence of the W/C ratio on the free and combined water of the different main hydrated phases. The gypsum content of the pastes was totally consumed in 8 h for all cases. A significant part of the hydration process occurs within the first 14 h of setting and at 24 h the highest hydration degree, indicated by the respective content of formed calcium hydroxide, occurs in the case of the highest initial water content of the paste.     

Rhodium/tris-binaphthyl chiral monophosphite complexes: Efficient catalysts for the hydroformylation of disubstituted aryl olefins

A family of threefold symmetry phosphite ligands, P(O–BIN–OR)₃ (BIN = 2,2′-binaphthyl; R = Me, Bn, CHPh₂, 1-adamantyl), derived from enantiomerically pure (R)-BINOL, was developed. Cone angles within the range 240–270° were calculated for the phosphite ligands, using the computational PM6 Hamiltonian. Their rhodium complexes formed in situ showed remarkable catalytic activity in the hydroformylation of hindered phenylpropenes, under relatively mild reaction conditions, with full chemoselectivity for aldehydes, high regioselectivity, however with low enantioselectivity. The ether substituents at the ligand affected considerably the catalytic activity on the hydroformylation of 1,1- and 1,2-disubstituted aryl olefins. The kinetics of the hydroformylation of trans-1-phenyl-1-propene, using tris[(R)-2′-benzyloxy-1,1′-binaphthyl-2-yl]phosphite as model ligand, was investigated. A first order dependence in the hydroformylation initial rate with respect to substrate and catalyst concentrations was found, as well as a positive order with respect to the partial pressure of H₂, and a slightly negative order with respect to phosphite concentration and CO partial pressure.     

Phthalocyanine thio-pyridinium derivatives as antibacterial photosensitizers

This study describes the synthesis of three new tetra- and octa-thio-pyridinium phthalocyanine derivatives. PSs 3a and 4a were prepared from the tetramerization of phthalonitriles 1 and 2, respectively, whereas PS 5 was prepared from the nucleophilic substitution of the 8 beta fluor atoms of hexadecafluorophthalocyaninatozinc(II) by mercaptopyridine, followed by cationization. The recombinant bioluminescent Escherichia coli strain was used to assess, in real time, the photoinactivation efficiency of these cationic phthalocyanines, under white and red light. The cellular localization and uptake were also determined to assess the potential of the new phthalocyanines as antibacterial agents. Derivative 3a was the most effective PS, causing a 5 logs reduction in bioluminescence after 30 min of irradiation under white or red lights. The photoinactivation efficiency of the phthalocyanine 4a was similar (5 logs reduction in bioluminescence) to that of 3a when irradiated with white light, but the efficiency of inactivation was reduced (2.1 logs reduction in bioluminescence) under red light. The tetra-substituted phthalocyanine 3a also generates high amounts of singlet oxygen, does not aggregate in PBS and is highly fluorescent, which makes it an effective PS and a promising fluorescent labeling.     

Distribution of hexavalent Cr species across the clay mineral surface-water interface

The adsorption isotherms of Cr(VI) on kaolinite, montmorillonite, and alumina were adequately treated with Langmuir model showing behavior characteristic of single-layer adsorption. The efficiency of the adsorbents in removing Cr(VI) from water follows the order alumina > kaolinite > montmorillonite > silica. Speciation studies indicate that hydrogen chromate ions were the major adsorbed species and simultaneous adsorption of dichromate ion occurred at concentrations greater than approximately 10(-3) mol L(-1). It is most probable that the mechanism of adsorption of the hydrogen chromate ion at the surface of alumina is predominantly electrostatic adsorption, with outer sphere complex formation.     

Development, validation and application of a method based on DI-SPME and GC-MS for determination of pesticides of different chemical groups in surface and groundwater samples

A simple and rapid method based on solid-phase micro extraction (SPME) technique followed by gas chromatography-mass spectrometry with selected ion monitoring (GC-MS, SIM) was developed by the simultaneous determination of 16 pesticides of seven different chemical groups [Six organophosphorus (trichlorfon, diazinon, methyl parathion, malathion, fenthion and ethyon), three pyrethroids (bifenhin, permethrin, cypermethrin), two imidazoles (imazalil and prochloraz), two strobilurins (azoxystrobin and pyraclostrobin), one carbamate (carbofuran), one tetrazine (clofentezine), and one triazole (difenoconazole)] in water. The pesticides extraction was done with direct immersion mode (DI-SPME) of the polyacrilate fiber (PA 85 µm). The extraction temperature was adjusted to 50 °C during 30 min, while stirring at 250 rpm was applied. After extraction, the fiber was introduced in the GC injector for thermal desorption for 5 min. at 280 °C. The method was validated using ultra pure water samples fortified with pesticides at different concentration levels and shows good linearity in the concentrations between 0.05 and 250.00 ng mL^− 1. The LOD and LOQ ranged, from 0.02 to 0.30 ng mL^− 1 and 0.05 to 1.00 ng mL^− 1, respectively. Intra-day and inter-day precisions were determined in two concentration levels (5.00 and 50.00 ng mL^− 1). Intra-day relative standard deviation (%R.S.D.) ranged between 3.6 and 13.6%, and inter-day (%R.S.D.) ranged between 6.3 and 18.5%. Relative recovery tests were carried out spiking the ultra pure sample with standards in three different concentration levels 0.20, 5.00 and 50.00 ng mL^− 1. The recovery at 0.20 ng mL^− 1 level varied from 86.4 ± 9.4% to 108.5 ± 10.5%, at 5.00 ng mL^− 1 level varied from 77.5 ± 10.8% to 104.6 ± 9.6% and at 50.00 ng mL^− 1 level varied from 70.2 ± 4.6% to 98.4 ± 8.5%. The proposed SPME method was applied in twenty-six water samples collected in the “Platô de Neópolis”, State of Sergipe, Brazil. Methyl parathion was detected in five samples with an average concentration of 0.17 ng mL^− 1 and bifenthrin, pyraclostrobin and azoxystrobin residues were found in three samples with average concentrations of 2.28, 3.12 and 0.15 ng mL^− 1, respectively.