Synthesis and characterization of PVP/AAc copolymer hydrogel and its applications in the removal of heavy metals from aqueous solution

Chelating poly(vinylpyrrolidone/acrylic acid) (PVP/AAc) copolymer hydrogels were prepared by radiation-induced copolymerization. The effects of preparation parameters such as PVP content in the hydrogel and irradiation dose on the swelling behavior of the hydrogel were studied. The pH dependent swelling was investigated. The thermal stability of the prepared hydrogel and the metal chelated ones was characterized by TGA. The removal of Fe(III), Cu(II), and Mn(II) from aqueous solution by the prepared PVP/AAc chelating hydrogel was examined by batch equilibration technique. The influence of treatment time, pH, and the initial feed concentration on the amount of the metal ions removed was studied. The results show that the removal of the metal ion followed the following order: Fe(III) > Cu(II) > Mn(II). The amounts of the removed metal ions increased with treatment time and pH of the medium. To re-use the hydrogel, the metal ions were stripped by using 2 N HCl.     

New and novel organic-inorganic type crystalline ‘polypyrrolel/polyantimonic acid’ composite system: preparation, characterization and analytical applications as a cation-exchange material and Hg(II) ion-selective membrane electrode

A new phase of ‘organic-inorganic’ composite system, polypyrrole polyantimonic acid, prepared by mixing the inorganic precipitate of hydrated antimony oxide with organic conducting polymer i.e., polypyrrole, providing a novel granular form hybrid cation-exchanger suitable for column operation with better chemical and thermal stability, good ion-exchange capacity, reproducibility and selectivity for heavy metals. The physicochemical properties of this material were studied using elemental analyses, AAS, SEM, XRD, FTIR and simultaneous TGA-DTA studies. Ion-exchange capacity, pH-titrations, elution and distribution behavior were also carried out to characterize the material. Distribution studies revealed the cation-exchange material to be highly selective for Hg(II) and its selectivity was performed by achieving some important binary separations like Hg²⁺-Zn²⁺, Hg²⁺-Ni²⁺, Hg²⁺-Cu²⁺, Hg²⁺-Fe³⁺, Hg²⁺-Cd²⁺, Hg²⁺-Mg²⁺ etc. on its column. Using this electroactive composite material, a new heterogeneous precipitate based selective ion-sensitive membrane electrode was fabricated for the determination of Hg(II) ions in solutions. The membrane electrode is mechanically stable, with a quick response time, and can be operated within a wide pH range. The selectivity coefficients for different cations determined by mixed solution method were found to be less than unity The electrode was also found to be satisfactory in electrometric titrations.     

TLC resolution of enantiomeric mixtures of amino acids

Summary Resolution of enantiomeric mixtures of DL-amino acids (Nine) using silica gel layers impregnated with (-)-bruncine is reported. The solvent system used was Butanol: Acetic acid: Chloroform (3∶1∶4). The diastereomers were formed and hydrolysed, by dilute HCl spray, on the chromatogram only and the amino acids thus resolved were located by ninhydrin spray. The cross resolution possibilities of enantiomers were also calculated.     

Kinetic and thermodynamic acidities of substituted 1-benzyl-1-methoxy-2-nitroethylenes. Strong reduction of the transition state imbalance compared to other nitroalkanes

Acidity constants of six substituted 1-benzyl-1-methoxy-2-nitroethylenes (2-Z with Z = m-NO(2), m-CF(3), m-Cl, H, p-Me, p-MeO) and their respective nitronic acids were determined in 50% DMSO-50% water (v/v) at 20 degrees C. Kinetic data were obtained on the reversible deprotonation of all six 2-Z by OH(-) and piperidine and on the reversible deprotonation of 2-NO(2)() by piperazine, 1-(2-hydroxyethyl)piperazine, and morpholine in the same solvent. These data allowed a determination of the Br?nsted coefficients alpha (dependence on acidity of 2-Z) and beta (dependence on amine basicity). The fact that alpha > beta indicates the presence of a transition state imbalance which, however, is much smaller than that for the deprotonation of arylnitromethanes. The reasons for this reduction in the imbalance and their relevance to a recent study of the deprotonation of Fischer carbene complexes are discussed.     

Electrochemical technique for the determination of fractal dimension of dental surfaces

Fractal dimension of a carious tooth surface was determined using an electrochemical method. The method was based on time-dependent diffusion towards electrode surfaces, which is one of the most useful and reliable methods for the determination of fractal dimension of electrode surfaces. For this purpose, the tooth was covered with a gold layer, which acted as an electrode in electrochemical experiments. It is suggested that the fractal dimension can be used as a quantitative measure of the state of dental surfaces. The method presented demonstrates the power of electrochemical techniques for the determination of fractal dimension of surface of non-conducting objects.     

Liquid-liquid-liquid phase microextraction of aromatic amines in water using crown ethers by high-performance liquid chromatography with monolithic column

Liquid-liquid-liquid phase microextraction (LLLME) coupled with high-performance liquid chromatography (HPLC) for the analysis of some aromatic amines is described. These compounds were extracted from 4.0 mL aqueous sample that adjusted to pH 13 with, NaOH-NaCl buffer solution (donor phase, P₁) into an organic phase (P₂) 150 μl benzyl alcohol and ethyl acetate (2:1) and then back extracted into a microdrop of aqueous acceptor phase (P₃), adjusted at pH 2, with Na₂HPO₄-H₃PO₄ buffer solution. The extraction time, T₁ (from P₁ to P₂) was 20 min and T₂ (from P₂ to P₃) was 1 min. Different crown ethers as complexing agents for amines were added to the acceptor phase to improve the extraction time. Factors such as organic solvents, extraction times, and addition of crown ethers to acceptor phase and stirring rate were optimised. The method was applied for determination of aromatic amines in wastewater samples. Enrichment factors ranged from 184.5 to 389.7. The linearity range was from 3 to 1000 ng/ml and the detection limits varied from 0.8 to 1.80 ng/ml. Relative standard deviations (%, n = 5) were found (at S/N 3) in the range of 1.9 to 10.1. All experiments were carried out at room temperature, 22 ± 0.5 °C.     

Structure-Photodynamic Activity Relationships of a Series of 4-Substituted Zinc Phthalocyanines

Abstract— Radioiodinated zinc phthalocyanine including [¹²⁵I]ZnPcI₄ and differently sulfonated [⁶⁵Zn]ZnPcS (ZnPcS₄, ZnPcS₃, ZnPcS₂ and ZnPcS_1.75, a mixture of adjacent di and 25% mono) were prepared in order to study cell uptake and release kinetics in EMT-6 cells. The same compounds were evaluated for their in vitro phototoxicity and the biological parameters were compared to partition coefficients to arrive at quantitative structure-activity relationships (QSAR). At 1 μM in 1% serum, at 37°C, all dyes showed rapid cell uptake during the first hour followed by a slow accumulation phase. After 24 h, the highest cellular concentration was observed with the lipophilic ZnPcI₄, followed by the amphiphilic ZnPcS₂ and ZnPcS_1.75. The hydrophilic ZnPcS₄ and ZnPcS₃ showed lower uptake. Dye release from dyeloaded cells during incubation in dye-free medium could reach up to 60% and was shown to depend mainly on the amount of drug incorporated rather than the type of compound. These results suggest that care should be taken in interpreting dye toxicity data, which involve in vitro cell manipulations in dye-free medium, particularly during in vitro/in vivo protocols. The EMT-6 cell survival after 1 h or 24 h incubation with 1 μM dye in 1% serum followed by exposure to red light was assessed by means of the colorimetric 3-(4,5-dimethylthiazol-2-yl)-diphenyl-tetrazolium bromide (MTT) assay. Photocytotoxicities correlated inversely with the tendencies of the dyes to aggregate. Increased dye uptake by the cells also correlated with their activities, except for the lipophilic ZnPcI₄, which showed the highest cell uptake but little phototoxicity. The QSAR between phototoxicity and the log of the partition coefficients (phosphate-buffered saline and n-octanol) gave a parabola with optimal partition values corresponding to the adjacent sulfonated ZnPcS₂.     

Effect of anion concentration on the stability of the uranyl-ascorbate complex

The effect of anion concentration and the dependence of uranyl ascorbate on the nature of anion present is systematically studied for nine different anions over the concentration range (0.2–2.0) × 10⁻² M. These anions, commonly encountered in pharmaceutical preparations with ascorbic acid (vitamin C) are nitrate, sulfate, chloride, bromide, fluoride, phosphate, citrate, oxalate, and tartrate. Based on the absorbance data, and on the value of the replacement constant K calculated, the studied anions may be arranged according to their complexing power on uranium as follows: citrate > tartrate > phosphate > oxalate > fluoride > sulfate > nitrate > chloride > bromide.This order is substantiated by the calculated values of the side reaction coefficients α_M of the uranyl ligand complex or the conditional stability constant of uranyl-ascorbate calculated at different ligand concentrations.     

Diterpenoid Alkaloids of Delphinium buschianum Grossh.

From the aerial parts of Delphinium buschianum Grossh ., collected in Turkey, a new diterpenoid alkaloid 1 , named budelphine, was isolated along with the known diterpenoid alkaloids karakoline ( 2 ), 18‐hydroxy‐14‐O‐methylgadesine ( 3 ), delsoline ( 4 ), lapaconidine ( 5 ), columbianine ( 6 ), 14‐benzoylneoline ( 7 ), and hetisine ( 9 ). The structure of 1 was established on the basis of ¹H‐, ¹³C‐, DEPT, ¹H,¹H‐COSY, NOESY, HSQC, and HMBC NMR studies.     

Level of some minor and trace elements in Bangladeshi meat products

An investigation on the level of some minor and trace elements in some varieties of meat (beef, mutton and chicken) consumed in Bangladesh is reported. In this study, protoninduced X-ray emission (PIXE) and radioisotope-induced X-ray fluorescence (XRF) techniques were used for analytical measurements. In PIXE measurements, the samples were exposed to the proton beam in air as 1 mm thick pellets and irradiated with 2.0 MeV protons having the beam intensity of 30 nA for characteristic X-ray excitation, whereas in XRF, the samples were excited for 5000 seconds with a 10 mCi¹⁰⁹Cd annular X-ray source. The elemental concentrations of Ca, Mn, Fe, Ni, Cu, Zn, As, Se, Br, Rb and Sr were determined in the samples by comparison with X-ray yield curves constructed from IAEA and NBS standard reference materials. The significance of the results is dicussed in relation to human health and diseases.This research received financial support from the International Atomic Energy Agency, Vienna, under the research contract RC-4265/RB.