Kinetics of adsorption of the cobalt ions on the "electrolytic solution/gamma-alumina" interface

In the present work we studied, for the first time, the kinetics of adsorption of the Co(H(2)O)(6)(2+) species on the "electrolytic solution/gamma-Al(2)O(3)" interface at pH = 7 and 25 degrees C for a very broad range of Co(II) surface concentrations ranged from 0.03 to 6 theoretical Co(H(2)O)(6)(2+) surface layers. Moreover, we studied the surface dissolution of gamma-alumina in the presence of the Co(H(2)O)(6)(2+) ions in the impregnating solution, the contribution of the Co(II) desorption on the whole deposition process and the deposition isotherm. It was found that under the conditions where the deposition has taken place, the dissolution of the gamma-alumina surface is negligible even in the presence of the Co(H(2)O)(6)(2+) species in the impregnating solution. It was, moreover, inferred that the Co(II) desorption does not participate significantly to the whole deposition process. It was found that the deposition kinetics may be described by the following kinetic expression r(Co,bulk) = k'C(Co,bulk)(2), which relates the rate of disappearance of the Co(H(2)O)(6)(2+) ions from the impregnating solution, r(Co,bulk,) with their concentration C(Co,bulk). This kinetic expression may be derived assuming the following deposition scheme: nS + 2[Co(H(2)O)(6)(2+)] --> S(n) - [Co(H(2)O)(x,x)(<)(6)(2+)](2), where S represents the surface reception sites. The above expressions indicated that two Co(H(2)O)(6)(2+) ions are involved, from the side of the interface, in the reaction with the reception sites. It seems probable that the deposition step involves the simultaneous adsorption and dimerization of the two interfacial Co(H(2)O)(6)(2+) ions through (hydr)oxobridges. On the other hand, the sigmoidal form of the deposition isotherm and the dependence of the apparent rate constant, k', on the interfacial Co(II) concentration suggested that the already deposited Co(II) species may be involved in the reception sites, S, promoting the adsorption and resulting to the formation of multinuclear complexes and Co(II) surface precipitates. Finally, reasonable interface potential values for oxides were determined for the first time using kinetic results.     

In situ UV-visible spectroscopic measurements of kinetic parameters and active sites for catalytic oxidation of alkanes on vanadium oxides

In situ diffuse reflectance UV-visible spectroscopy was used to measure the dynamics of catalyst reduction and oxidation during propane oxidative dehydrogenation (ODH) on VOx/gamma-Al2O3. Transients in UV-visible intensity in the near-edge region were analyzed using a mechanistic model of ODH reactions. Rate constants per site for the kinetically relevant reduction step (C-H bond activation) measured using this analysis are slightly larger than those obtained from steady-state ODH rates normalized by surface V. The ratio of these values provides a measure of the fraction of the V surface sites that are active for ODH (0.6-0.7, for V surface densities of 2.3-34 V nm(-2)). This suggests that some of the V atoms are either inaccessible or inactive. Reoxidation rate constants, which cannot be obtained from steady-state analysis, are 10(3)-10(5) times larger than those for the C-H bond activation reduction step.     

The endothermic “annealing peak” of poly(phenylene sulphide) and poly(ethylene terephthalate)

The appearance of an endothermic annealing peak in semicrystalline poly(phenylene sulphide) and semicrystalline poly(ethylene terephthalate) after annealing at or above the cold-crystallization temperature is investigated by temperature-modulated differential scanning calorimetry, thermo-mechanical analysis and dynamic-mechanical analysis. The results indicate relaxation processes in the interlamellar amorphous phase, which is in a strongly constrained state after cold crystallization. During the annealing treatments rearranging processes take place. These processes result in a separation of the amorphous phase into an interlamellar relaxed and a “pseudo-crystalline” phase. Received: 27 October 1998 Accepted in revised form: 19 January 1999     

Ketendithioacetal-S-imide

Starting from 2-isopropylidene-1,3-dithiane, various ketene-dithioacetal-S-imides have been prepared and characterized by¹H- and¹³C-NMR spectra.

---

Ketendithioacetal-S-imideKurze Mitteilung

     

Enantioselective Approach for Expanding the Three-Dimensional Space of Tetrahydroquinoline to Develop BET Bromodomain Inhibitors**

The pharmaceutical industry has a pervasive need for chiral specific molecules with optimal affinity for their biological targets. However, the mass production of such compounds is currently limited by conventional chemical routes, that are costly and have an environmental impact. Here, we propose an easy access to obtain new tetrahydroquinolines, a motif found in many bioactive compounds, that is rapid and cost effective. Starting from simple raw materials, the procedure uses a proline-catalyzed Mannich reaction followed by the addition of BF₃ ⋅ OEt₂, which generates a highly electrophilic aza-ortho-quinone methide intermediate capable of reacting with different nucleophiles to form the diversely functionalized tetrahydroquinoline. Moreover, this enantioselective one-pot process provides access for the first time to tetrahydroquinolines with a cis-2,3 and trans-3,4 configuration. As proof of concept, we demonstrate that a three-step reaction sequence, from simple and inexpensive starting compounds and catalysts, can generate a BD2-selective BET bromodomain inhibitor with anti-inflammatory effect.     

Combination of sorption properties of polydimethylsiloxane and solid‐phase extraction sorbents in a single composite material for the passive sampling of polar and apolar pesticides in water

Passive sampling techniques have been developed as an alternative method for in situ integrative monitoring of trace levels of neutral pesticides in environmental waters. The objective of this work was to develop a new receiving phase for pesticides with a wide range of polarities in a single step. We describe the development of three new composite silicone rubbers, combining polydimethylsiloxane mechanical and sorption properties with solid‐phase extraction sorbents, prepared as a receiving phase for passive sampling. A composite silicone rubber composed of polydimethylsiloxane/poly(divinylbenzene‐co‐N‐vinylpyrrolidone) was selected by batch experiments for its high sorption properties for pesticides with octanol‐water partition coefficients ranging from 2.3 to 5.5. We named this composite material “Polar/Apolar Composite Silicone Rubber”. A structural study by scanning electron microscopy confirmed the homogeneous dispersion of the sorbent particles and the encapsulation of particles within the polydimethylsiloxane matrix. We also demonstrate that this composite material is resistant to common solvents used for the back‐extraction of analytes and has a maximal resistance temperature of 350°C. Therefore, the characteristics of the “Polar/Apolar Composite Silicone Rubber” meet most of the criteria for use as a receiving phase for the passive sampling of pesticides.     

Study of thermal aging effect on space charge in poly(methyl methacrylate)

Charges evolution in poly(methyl methacrylate) (PMMA) samples under thermal aging effect has been studied by means of two complementary techniques, thermal step method (TSM) and thermally stimulated depolarization current (TSDC). For the first method, measurements reveal that injected charges, whose quantity is found depending on the number of applied temperature cycles, remain close to the surface sample. TSDC measurements have been carried out for different temperatures ranging from 25 °C to 140 °C. Three distinguishable dipolar relaxations (β₁, β₂ and α) have been highlighted. In the same way, the presence of polarization and injected charges has been confirmed. In support of electric characterization, X-ray reflectometry has been used. The obtained results equally emphasized the thermal aging effect on the material.