Diffusion-controlled stress-relaxation in polymers,I

Summary The “chemical” relaxation of stress either in Amilan (6-Nylon) or polyvinyl alcohol caused by penetration of water vapor was studied at 40% R. H. and temperatures 15, 30, and 50° C. A theory was presented of the chemical relaxation in a polymer which comprises penetrant-sensitive bonds as the crosslinkages between the molecular chains. This theory assumes the diffusion coefficient of penetrant in the polymer to he independent of concentration and any other factors. It was found that the system Amilan-water behaves in exact conformity with the theory over the ranges of elongation and temperature studied. The diffusion coefficient,D, of water in Amilan could thus be evaluated from the chemical relaxation data, using the theory presented, as functions of elongation and temperature. An ordinary sorption experiment was carried out for this system at 40% R. H. and 16.8° C and demonstrated that the diffusion of water in Amilan was Fickian with a constant diffusion coefficient. Both diffusion coefficients from the chemical relaxation data and the sorption. data were found to agree quite well when the former was extrapolated to zero-strain. The chemical relaxation behavior in the system polyvinyl alcohol-water was markedly different from that expected from the theory, suggesting primarily that the diffusion coefficient of water in this polymer was not constant. A parallel evidence for this fact was obtained from sorption measurements on this system, which demonstrated the diffusion in this system to be dependent both on concentration and time. From these results it may be concluded that the chemical relaxation technique, when combined properly with an adequate theory, can be used not only to evaluate the diffusion coefficient of penetrant in a given polymer solid but also to investigate, at least qualitatively, the type of sorption behavior characteristic of the system under given experimental conditions.

---

Zusammenfassung Die chemische Spannungsrelaxation in Amilan (6-Nylon) und Polyvinylalkohol, verursacht durch Eindringen von Wasserdampf, wurde bei 40% r. F. und Temperaturen von 15, 30 und 50° C untersucht. Es wird eine Theorie der chemischen Relaxation von Polymeren vorgelegt, die als empfindliche Bindungen auf das eindringende Niedermolekulare die Vernetzungen zwischen den molekularen Ketten betrachtet. Diese Theorie setzt voraus, da? der Diffusionskoeffizient im Polymeren für die eindringende Substanz unabh?ngig von Konzentration und anderen Faktoren ist. Das System Amilan-Wasser benimmt sich vollkommen entsprechend dieser Theorie in den studierten Verstreckungs- und Temperaturbereiche. Der Diffusionskoeffizient von Wasser in Amilan konnte daher aus der chemischen Relaxation als Funktion von Dehnung und Temperatur ausgewertet werden. Ein normales Quellungsexperiment wurde für das System bei 40% r. F. und 16,8° C ausgeführt und zeigte, da? die Diffusion von Wasser in Amilan dem Fickschen Gesetz mit konstantem Diffusionskoeffizienten folgt. Beide Diffusionskoeffizienten, der aus chemischer Relaxation und der aus Quellungsdaten gewonnene, stimmten sehr gut überein, falls der erstere auf die Dehnung 0 extrapoliert wurde. Die chemische Relaxation des Systems Polyvinylalkohol-Wasser war merklich anders als nach der Theorie erwartet und lie? in erster Linie vermuten, da? der Diffusionskoeffizient von Wasser in diesem Polymeren nicht konstant ist. Eine entsprechende Andeutung wurde aus Quellungsmessungen an diesem System erhalten. Die Diffusion h?ngt von Konzentration und Zeit ab. Aus diesen Resultaten kann gefolgert werden, da? die Technik der Untersuchungen der chemischen Relaxation unter Verwendung einer geeigneten Theorie nicht nur dazu angewendet werden kann, Diffusionskoeffizienten von kleinen Molekülen in einem gegebenen festen Polymeren zu messen, sondern zumindest auch qualitativ den Typ des Quellungsverhaltens festzustellen, der das System unter den gegebenen experimentellen Bedingungen charakterisiert.

     

Total synthesis of cis-solamin

[structure: see text] A convergent total synthesis of cis-solamin and its diastereomer was accomplished using VO(acac)2-catalyzed diastereoselective epoxidation followed by cyclization of bis-homoallylic alcohol as the key step. By comparison of the optical rotation of two possible diastereomers, it is suggested that the absolute configuration of natural cis-solamin is 1a.     

On fluctuations in μ-space

A master equation is derived microscopically to describe the fluctuating motion of the particle density in . space. This equation accounts for the drift motion of particles and is valid for any inhomogeneous gas. The Boltzmann equation is obtained from the first moment of this equation by neglecting the second cumulant (the pair correlation function). The successive moments form coarse-grained BBGKY-like hierarchy equations, in which small spatial regions with r_ij < the force range are smeared out. These hierarchy equations are convenient for investigating the nonequilibrium long-range pair correlation function, which arises mainly from sequences of isolated binary collisions and gives rise to the much-discussed long-time tail and the logarithmic term in the density expansion of transport coefficients. It is shown to have a spatial long tail, like the Coulombic potential, in a steady laminar flow. The stochastic nature of the nonlinear Boltzmann-Langevin equation is also investigated; the random source term is found to be expressed as a linear superposition of Poisson random variables and to become Gaussian in special cases.     

Cloud point extraction equilibrium of lanthanum(III), europium(III) and lutetium(III) using di(2-ethylhexyl)phosphoric acid and Triton X-100

The cloud point extraction behaviors of lanthanoids(III) (Ln(III) = La(III), Eu(III) and Lu(III)) with and without di(2-ethylhexyl)phosphoric acid (HDEHP) using Triton X-100 were investigated. It was suggested that the extraction of Ln(III) into the surfactant-rich phase without added chelating agent was caused by the impurities contained in Triton X-100. The extraction percentage more than 91% for all Ln(III) metals was obtained using 3.0 × 10⁻⁵ mol dm⁻³ HDEHP and 2.0% (v/v) Triton X-100. From the equilibrium analysis, it was clarified that Ln(III) was extracted as Ln(DEHP)₃ into the surfactant-rich phase. The extraction constant of Ln(III) with HDEHP and 2.0% (v/v) Triton X-100 were also obtained.     

Self-crosslinkable polymers. I. Copolymerization of glycidyl methacrylate with 2-vinylpyridine and 2-vinyl-5-ethylpyridine

A soluble and self-crosslinkable linear copolymer with pendant epoxy and pyridyl groups was obtained from glycidyl methacrylate (M₁) and 2-vinylpyridine (M₂) or 2-vinyl-5-ethylpyridine (M₂) by the action of azobisisobutyronitrile. The monomer reactivity ratios were determined in tetrahydrofuran at 60°C: r₁ = 0.510, r₂ = 0.620 with 2-vinylpyridine and r₁ = 0.57, r₂ = 0.62 with 2-vinyl-5-ethylpyridine. These were consistent with the calculated values with the reported Q and e values for these monomers. The intrinsic viscosities of the copolymers with 2-vinylpyridine and with 2-vinyl-5-ethylpyridine were found to be 0.17–0.19 and 0.26–0.38, respectively, in tetrahydrofuran at 30°C; they were independent of the copolymer composition. The copolymers were amorphous, had no clear melting points, and became insoluble crosslinked polymers under heating without further addition of any curing agents.     

Diacetoxylation of conjugated dienes with thallium(III) acetate in acetic acid

The reaction of conjugated dienes such as 1,3-butadiene, isoprene, 2,3-dimethyl-1,3-butadiene, 2,5-dimethyl-2,4-hexadiene, 1,3-cyclopentadiene, and 1,3-cyclohexadiene, with thallium(III)acetate in acetic acid at 10–65° for 0.5–15 hr affords an isomeric mixture of the corresponding diacetoxyalkenes (1,2- and 1,4-addition products) in 10–92% yields. The 1,2-addition products are predominantly formed in all cases examined except the case of 1,3-cyclopentadiene. The reaction is assumed to proceed through acetoxythallation and dethallation steps, the latter step being accompanied and/or followed by an attack of acetoxyl group. An initial attack of thallium moiety is proposed to occur mainly at C-1 and C-2 carbons in the cases of linear terminal dienes and cyclic dienes, respectively.     

Prediction of measurement precision of apparatus using a chemometric tool in electrochemical detection of high-performance liquid chromatography

The relative standard deviation (RSD) of measurements in high-performance liquid chromatography with electrochemical detection (HPLC-ECD) was predicted by a chemometric tool based on the 1/f fluctuation model which is made up of white noise and a Markov process, called the Function of Mutual Information (FUMI) theory. FUMI theory can provide aprecise and reliable detection limit from a single measurement of noise and signal in HPLC-ECD. To obtain RSD (n = 5) for determination of (-)-epicatechin at five concentrations required 12.5 h, while the predicted RSD by FUMI theory required only 0.5 h (one measurement). Moreover, to trace the source of instrumental noise, power spectra of chromatographic baseline were used. Selection of a suitable apparatus in HPLC-ECD system, acquisition of RSD, and detection limits for determination of catechins by HPLC-ECD were simply and easily made by this chemometric tool within a very short time. The use of the FUMI theory for the prediction of measuring precision was more efficient and the optimization was less time-consuming to be suited for determination.     

Magnetic circular dichroism of theA andB bands in KI:Ga+, KI:In+, and KI:Sn2+

Magnetic circular dichroism (MCD) of theA- andB-absorption band region has been obtained at 4.2 K and 50 kG in KI:Ga⁺, KI:In⁺, and KI:Sn²⁺. The MCD spectra indicate the complex nature of these bands more clearly than the absorption spectra themselves do. TheA-band MCD consists in all cases of a positive and a negative part reflecting the structure of the absorption band. TheB-band MCD shows three peaks, two positive peaks at 4.34 and 4.41₅ eV (4.09 and 4.17₅ eV) and a negative peak at 4.38 eV (4.12₅ eV) in KI:Ga⁺ (KI:In⁺). TheB-band in KI:Sn²⁺ consists of a shoulder (b ₀) at 3.76 eV and a main band which has at least 5 sub-peaks (b ₁~b ₅) at 3.82₁, 3.84₁, 3.86₁, 3.88₀, and 3.89₅ eV; each of the subpeaks (b ₁~b ₅) gives a derivative-like MCD.The MCD shape functionf() for the transitiona _1g ² a _1g t _1u has been obtained for one set of parameter values by using the classical Franck-Condon approximation and the Monte Carlo integration method. The result can explain the observed salient features of theB- as well asA-band MCD's, indicating the validity of the Franck-Condon approximation and the interaction mode coordinates.     

N,N-Diethyl-3-toluamide Formulation Based on Ethanol Containing 0.1% 2-Hydroxypropyl-β-cyclodextrin Attenuates the Drug’s Skin Penetration and Prolongs the Repellent Effect without Stickiness

N,N-diethyl-3-toluamide (DEET) is one of the most widely used insect repellents in the world. It was reported that a solution containing 6–30% cyclodextrin (CD) as a solvent instead of ethanol (EtOH) provided an enhancement of the repellent action time duration of the DEET formulation, although the high-dose CD caused stickiness. In order to overcome this shortcoming, we attempted to prepare a 10% DEET formulation using EtOH containing low-dose CDs (β-CD, 2-hydroxypropyl-β-CD (HPβCD), methyl-β-CD, and sulfobutylether-β-CD) as solvents (DEET/EtOH/CD formulations). We determined the CD concentration to be 0.1% in the DEET/EtOH/CD formulations, since the stickiness of 0.1% CDs was not felt (approximately 8 × 10⁻³ N). The DEET residue on the skin superficial layers was prolonged, and the drug penetration into the skin tissue was decreased by the addition of 0.1% CD. In particular, the retention time and attenuated penetration of DEET on the rat skin treated with the DEET/EtOH/HPβCD formulation was significantly higher in comparison with that of the DEET/EtOH formulation without CD. Moreover, the repellent effect of DEET was more sustained by the addition of 0.1% HPβCD in the study using Aedes albopictus. In conclusion, we found that the DEET/EtOH/HPβCD formulations reduced the skin penetration of DEET and prolonged the repellent action without stickiness.