块状介质超连续谱相位的相干特性

 块状介质超连续谱由一系列复杂的非线性过程产生。用两路飞秒泵浦光聚焦到熔石英玻璃上得到两束独立的超连续谱，实验上观察到它们形成的稳定干涉条纹；改变两路泵浦光的时间延迟，得到共线超连续谱形成的频率梳。实验证明，块状介质超连续谱的产生保持了泵浦光的相位锁定关系，泵浦光能量抖动和介质的缺陷都不会对超连续谱的相位带来明显的扰动。     

BFEL激光能量的计算

 为进一步提高BFEL的小信号增益和确定激光能量等性能参数，用定态和非定态程序对BFEL激光的能量进行了计算和分析。计算结果表明:采取适当措施，将电子束的发射度由50 pmm·mrad降低到30 pmm·mrad，电子束宏脉冲宽度由5.0 ms增加到6.5 ms，激光传输效率由40%增加到80%，BFEL的小信号增益将由16%增大到28%，输出激光的能量也将提高近一个量级。     

大面积均匀电子束产生实验研究

 在电子束泵浦气体激光实验中，大面积均匀电子束是获得高效能激光输出的必要条件。介绍了利用SPG-200脉冲功率源产生大面积均匀电子束的实验。SPG-200是基于SOS的全固态重复频率脉冲功率源，其开路电压大于350 kV。用于产生电子束的真空二极管阴极长294 mm，宽24 mm，两端均为半径为12 mm的半圆，栅网平面为阳极面，两者之间的距离在0~49 mm可调，阴极发射的电子束通过用于隔离激光气室和二极管真空室的压力膜及其支撑栅网引出。分别以石墨和天鹅绒为阴极材料，获得了大面积电子束输出，给出了二极管参数的测量结果，并对电子束发射均匀性进行了诊断。实验结果表明：在阴极材料为石墨、阴阳极间隙为5~9 mm时，二极管电压为240~280 kV，二极管电流为0.7~1.8 kA，输出的电子束很不均匀；在阴极材料为天鹅绒、阴阳极间隙为31~46 mm时，二极管电压为200~250 kV，二极管电流为1.5~1.7 kA，输出的电子束均匀性较好。     

Dendritic and eutectic growth in Sb<Subscript>60</Subscript>Ag<Subscript>20</Subscript>Cu<Subscript>20</Subscript> ternary alloy

The rapid solidification of Sb60Ag20Cu20 ternary alloy was realized by high undercooling method, and the maximum undercooling is up to 142 K (0.18TL). Within the wide undercooling range of 40-142 K, the solidified microstructures are composed of (Sb), θand ε phases. High undercooling enlarges the solute solubility of (Sb) phase, which causes its crystal lattice to expand and its crystal lattice constants to increase. Primary (Sb) phase grows in two modes at small undercoolings non-faceted dendrite growth is the main growth form; whereas at large undercoolings faceted dendrite growth takes the dominant place. The remarkable difference of crystal structures between (Sb) and θphases leads to (θ Sb) pseudobinary eutectic hard to form, whereas strips of θform when the alloy melt reaches the (θ Sb) pseudobinary eutectic line. The cooperative growth of θand ε phases contributes to the formation of (ε θ) pseudobinary eutectic easily. In addition, the crystallization route has been determined via microstructural characteristic analysis and DSC experiment.     

电子转移速率理论研究：运动谱窄化所导致的非马尔可夫电子转移过程

严格的速率方程理论得到的总是非马尔可夫的，可是大部分实验都可以用马尔可夫的、即传统的速率常数基础上的反应动力学方程来描述．针对这一问题研究了电子转移过程中的马尔可夫/非马尔可夫特性．以最简单的两态电子转移反应为体系，以其在德拜溶剂中的严格动力学解为标定，采用光谱领域著名的Kubo运动谱窄化线型函数及其特性参数来描述电子转移过程中的马尔可夫/非马尔可夫本质．该马尔可夫特性参数是相干转移耦合与溶剂环境涨落相互影响共同作用的结果，以它为基础说明了大部分实验确实可以通过传统的速率方程来描述，而非马尔可夫速率过程最     

Effect of the surface-modifying macromolecules on the duration of the surface functionalization

Functionalization of polystyrene films by the preferential surface enrichment of surface-modifying macromolecules (SMM) to achieve a hydrophilic surface with long effective duration is described. The comb-like amphiphilic copolymers (PKG-g-PS) based on styrene-maleic anhydride copolynier (SMA) backbone was synthesized by esterification of SMA with poly(ethylene glycol) (PEG). When PEG-g-PS was melt blended with polystyrene, the preferential surface enrichment of PEG-g-PS was much evident resulting in the large increase of the surface polarity. The effective duration of the surface functionalizatoin was also hugely extended as SMMs were added into the blends. Furthermore, more polyether chain segments on PEG-g-PS could selectively migrate to the surface by the inducement of polar solvent. Compared with the PEG-g-PS/PS and PEG/PEG-g-PS/PS blends, the surface polarity and the effective duration of surface modification both increased greatly when PEG-g-PS was used as the compatibilizer of PEG/PS blends. It was an effective solution to balance the conflict between the duration and efficiency of the surface-modifying additives.     

Coherent Structures in Transition of a Flat-Plate Boundary Layer at Ma = 0.7

Direct numerical simulation （DNS） of a spatially evolving fiat-plate boundary layer transition process at free stream Mach number 0. 7 is performed. Tollmien-Schlichting （T-S） waves are added on the inlet boundary as the disturbances before transition. Typical coherent structures in the transition process are investigated based on the second invariant of velocity gradient tensor. The instantaneous shear stress and the mean velocity profile in the transition region are studied. In our view, the fact that the peak value of shear stress in the stress concentration area increases and exceeds a threshold value during the later stage of the trallsition process plays an important role in the laminar breakdown process.     

Ground State Property of LiV2O4

The spinel structure LiV2O4 is studied by local density approximation （LDA） as well as including strong correlation correction potential, i.e. the LDA＋U scheme, which concerns the strongly correlated interaction. With LDA, the orbitals of V 3d and O 2p are well separated so that it presents purely metallic heavv fermion behaviour. The total energy of ferromagnetic phase is slightly lower than that of paramagnetic phase within the LDA ap- proach. This implies that the ferromagnetic instability as a consequence of spin frustrated magnetism can be observed in experiments. The strong correlation interaction by using LDA＋U enhances the exchange splitting. The heavy-fermion feature can be derived from the sharp peak around the Fermi level from the density of states.     

Multiple ionization of argon accompanied by electron loss and capture of 0.22-6.35 MeV C^q＋ ions

In this paper a projectile ions recoil ions coincidence technique is employed to investigate the target ionization and projectile charge state changing processes in the collision of 0.22-6.35 MeV Cq^＋ （q = 1 - 4） ions with argon atoms. The partial cross section ratios of the double, triple, quadruplicate ionization to the single ionization （or the single capture） of argon associated with single electron loss （or single electron capture） by the projectile are measured and compared with the previous experimental results. In the present experiment, it is observed that the ratios of ionization cross sections R associated with single loss and single capture depend strongly on the projectile charge state and vary significantly with different reaction channels as impact energy increases. In addition, this paper gets empirical scaling laws for the ionization cross section ratios R corresponding to the projectile single loss and finds that the ratios of the double ionization to the single ionization associated with single electron capture remain constant in the present energy range.     

Combustion of bimodal nano/micron-sized aluminum particle dust in air

The combustion of bimodal nano/micron-sized aluminum particles with air is studied both analytically and experimentally in a well-characterized laminar particle-laden flow. Experimentally, an apparatus capable of producing Bunsen-type premixed flames was constructed to investigate the flame characteristics of bimodal-particle/air mixtures. The flame speed is positively affected by increasing the mass fraction of nano particles in the fuel formulation despite the lower flame luminosity and thicker flame zone. Theoretically, the flames are assumed to consist of several different regimes for fuel-lean mixture, including the preheat, flame, and post flame zones. The flame speed and temperature distribution are derived by solving the energy equation in each regime and matching the temperature and heat flux at the interfacial boundaries. The analysis allows for the investigation of the effects of particle composition and equivalence ratio on the burning characteristics of aluminum-particle/air mixtures. Reasonable agreement between theoretical results and experimental data was obtained in terms of flame speed. The flame structure of a bimodal particle dust cloud may display either an overlapping or a separated configuration, depending on the combustion properties of aluminum particles at different scales. At low percentages of nano particles in the fuel formulation, the flame exhibits a separated spatial structure with a wider flame regime. At higher nano-particle loadings, overlapping flame configurations are observed.