In situ Growth of a Cobalt‐based Metal‐organic Framework on Multi‐walled Carbon Nanotubes for Simultaneously Detection of Hydroquinone and Catechol.

In the present study, we report a facile method for preparing a porous MWCNTs/ZIF‐67 nanocomposite with the help of a morphology‐maintained ZIF‐67 in situ growth on multi‐walled carbon nanotubes. Interesting, the MWCNTs/ZIF‐67 nanocomposite demonstrated excellent electrochemical activity for hydroquinone (HQ) and catechol (CC) attribute to the effective interconnections ZIF‐67 crystals and MWCNTs. The analytical curves for HQ and CC obtained by differential pulse voltammetry (DPV) were linear in the range from 0.5 to 100 μM. Benefitting from the excellent conductivity of MWCNTs as well as the high surface area and porosity of ZIF‐67, the advanced nanocomposite displayed good reproducibility, high selectivity and excellent stability, and was successfully employed to assay the content of dihydroxybenzene isomers in the lake water samples.     

Synthesis of Zinc Tetraaminophthalocyanine Functionalized Graphene Nanosheets as an Enhanced Material for Sensitive Electrochemical Determination of Uric Acid

A new electrochemical sensor material has been fabricated via the non‐covalent functionalization of reduced graphene oxide (rGO) and soluble tetramino zincphthalocyanines (ZnPc‐NH₂). Immobilization of uricase onto the synthesized nanohybrids can evidently improve the electrocatalytic activity and selectivity. The obtained composite membrane possesses a great enhancement of electron transfer rate and excellent synergistic electrocatalytic effect toward uric acid (UA) oxidation under the working potential at 0.620 V vs. Ag/AgCl with a scan rate of 0.125 V/s. The effects of the experimental parameters on the electrochemical oxidation responses of UA were investigated and optimized in detail. Under the optimized conditions, the peak currents were proportional to the UA concentration in a range from 0.5 to 100 μmol/L with detection limit of 0.15 μmol/L. Moreover, the developed sensor was applied for UA determination in human urine samples with high accuracy and satisfactory recovery, which is envisioned to have promising applications in monitoring UA in clinical research.     

High‐Performance K–CO2 Batteries Based on Metal‐Free Carbon Electrocatalysts

Metal–CO₂ batteries have attracted much attention owing to their high energy density and use of greenhouse CO₂ waste as the energy source. However, the increasing cost of lithium and the low discharge potential of Na–CO₂ batteries create obstacles for practical applications of Li/Na–CO₂ batteries. Recently, earth‐abundant potassium ions have attracted considerable interest as fast ionic charge carriers for electrochemical energy storage. Herein, we report the first K–CO₂ battery with a carbon‐based metal‐free electrocatalyst. The battery shows a higher theoretical discharge potential (E^?=2.48 V) than that of Na–CO₂ batteries (E^?=2.35 V) and can operate for more than 250 cycles (1500 h) with a cutoff capacity of 300 mA h g^?1. Combined DFT calculations and experimental observations revealed a reaction mechanism involving the reversible formation and decomposition of P12₁/c1‐type K₂CO₃ at the efficient carbon‐based catalyst.     

Amorphous Metal–Organic Framework‐Dominated Nanocomposites with Both Compositional and Structural Heterogeneity for Oxygen Evolution

Amorphous metal–organic frameworks (aMOFs) are an emerging family of attractive materials with great application potential, however aMOFs are usually prepared under harsh conditions and aMOFs with complex compositions and structures are rarely reported. In this work, an aMOF‐dominated nanocomposite (aMOF‐NC) with both structural and compositional complexity has been synthesized using a facile approach. A ligand‐competition amorphization mechanism is proposed based on experimental and density functional theory calculation results. The aMOF‐NC possesses a core–shell nanorod@nanosheet architecture, including a Fe‐rich Fe‐Co‐aMOF core and a Co‐rich Fe‐Co‐aMOF shell in the core–shell structured nanorod, and amorphous Co(OH)₂ nanosheets as the outer layer. Benefiting from the structural and compositional heterogeneity, the aMOF‐NC demonstrates an excellent oxygen evolution reaction activity with a low overpotential of 249 mV at 10.0 mA cm^?2 and Tafel slope of 39.5 mV dec^?1.     

Enhanced Surface Interactions Enable Fast Li+ Conduction in Oxide/Polymer Composite Electrolyte

Li⁺‐conducting oxides are considered better ceramic fillers than Li⁺‐insulating oxides for improving Li⁺ conductivity in composite polymer electrolytes owing to their ability to conduct Li⁺ through the ceramic oxide as well as across the oxide/polymer interface. Here we use two Li⁺‐insulating oxides (fluorite Gd_0.1Ce_0.9O_1.95 and perovskite La_0.8Sr_0.2Ga_0.8Mg_0.2O_2.55) with a high concentration of oxygen vacancies to demonstrate two oxide/poly(ethylene oxide) (PEO)‐based polymer composite electrolytes, each with a Li⁺ conductivity above 10^?4 S cm^?1 at 30 °C. Li solid‐state NMR results show an increase in Li⁺ ions (>10 %) occupying the more mobile A2 environment in the composite electrolytes. This increase in A2‐site occupancy originates from the strong interaction between the O^2? of Li‐salt anion and the surface oxygen vacancies of each oxide and contributes to the more facile Li⁺ transport. All‐solid‐state Li‐metal cells with these composite electrolytes demonstrate a small interfacial resistance with good cycling performance at 35 °C.     

Gold(I)‐Catalyzed Cycloisomerization of 3‐Alkoxyl‐1,6‐diynes: A Facile Access to Bicyclo[2.2.1]hept‐5‐en‐2‐ones

A novel gold‐catalyzed cycloisomerization of 1,6‐diynes was achieved, providing an atom‐economic approach to a diverse set of bicyclo[2.2.1]hept‐5‐en‐2‐ones in moderate to good yields. With unsymmetrical starting materials with two different internal alkynyl substituents, to some extent, the regioselectivity could be controlled by both electronic and steric factors. This unprecedented reactivity pattern may inspire new and unconventional strategies for the preparation of bridged ring systems.     

Biomimetic Hydrogenation Catalyzed by a Manganese Model of [Fe]‐Hydrogenase

[Fe]‐hydrogenase is an efficient biological hydrogenation catalyst. Despite intense research, Fe complexes mimicking the active site of [Fe]‐hydrogenase have not achieved turnovers in hydrogenation reactions. Herein, we describe the design and development of a manganese(I) mimic of [Fe]‐hydrogenase. This complex exhibits the highest activity and broadest scope in catalytic hydrogenation among known mimics. Thanks to its biomimetic nature, the complex exhibits unique activity in the hydrogenation of compounds analogous to methenyl‐H₄MPT⁺, the natural substrate of [Fe]‐hydrogenase. This activity enables asymmetric relay hydrogenation of benzoxazinones and benzoxazines, involving the hydrogenation of a chiral hydride transfer agent using our catalyst coupled to Lewis acid‐catalyzed hydride transfer from this agent to the substrates.     

Towards Long‐Term Photostability of Nickel Hydroxide/BiVO4 Photoanodes for Oxygen Evolution Catalysts via In Situ Catalyst Tuning

Increasing long‐term photostability of BiVO₄ photoelectrode is an important issue for solar water splitting. The NiOOH oxygen evolution catalyst (OEC) has fast water oxidation kinetics compared to the FeOOH OEC. However, it generally shows a lower photoresponse and poor stability because of the more substantial interface recombination at the NiOOH/BiVO₄ junction. Herein, we utilize a plasma etching approach to reduce both interface/surface recombination at NiOOH/BiVO₄ and NiOOH/electrolyte junctions. Further, adding Fe²⁺ into the borate buffer electrolyte alleviates the active but unstable character of etched‐NiOOH/BiVO₄, leading to an outstanding oxygen evolution over 200 h. The improved charge transfer and photostability can be attributed to the active defects and a mixture of NiOOH/NiO/Ni in OEC induced by plasma etching. Metallic Ni acts as the ion source for the in situ generation of the NiFe OEC over long‐term durability.     

Ultrafast,Low‐Cost,and Mass Production of High‐Quality Graphene

Fast, mass, and low‐cost production of high‐quality graphene, which is alluring, remains a great challenge, even though some approaches have shown potential for mass synthesis of graphene. Very recently a great breakthrough was made by Tour and co‐workers (Nature 2020, 577, 647–651): in just a second, easily exfoliated and highly crystalline graphene was produced from abundant carbon‐containing species by cost‐effective flash Joule heating with a low energy input of 7.2 kJ per gram graphene. Such an ultrafast, economic, and scalable process for high‐quality graphene production can be considered as a milestone in the graphene field and is highlighted in this article.     

Stretchable Perovskite Solar Cells with Recoverable Performance

Perovskite solar cells (PSCs) are a promising photovoltaic technology for stretchable applications because of their flexible, light‐weight, and low‐cost characteristics. However, the fragility of crystals and poor crystallinity of perovskite on stretchable substrates results in performance loss. In fact, grain boundary defects are the “Achilles’ heel” of optoelectronic and mechanical stability. We incorporate a self‐healing polyurethane (s‐PU) with dynamic oxime–carbamate bonds as a scaffold into the perovskite films, which simultaneously enhances crystallinity and passivates the grain boundary of the perovskite films. The stretchable PSCs with s‐PU deliver a stabilized efficiency of 19.15 % with negligible hysteresis, which is comparable to the performance on rigid substrates. The PSCs can maintain over 90 % of their initial efficiency after 3000 hours in air because of their self‐encapsulating structure. Importantly, the self‐healing function of the s‐PU scaffold was verified in situ. The s‐PU can release mechanical stress and repair cracks at the grain boundary on multiple levels. The devices recover 88 % of their original efficiency after 1000 cycles at 20 % stretch. We believe that this ingenious growth strategy for crystalline semiconductors will facilitate development of flexible and stretchable electronics.