Synthesis and electrochemical properties of a novel calix[4]arene derivative for facilitated transfer of alkali metal ions across water/1,2-dichloroethane micro-interface

The alkali metal ion transfers facilitated by a novel calix[4]arene derivative (OPEC) across the water/1,2-dichloroethane (1,2-DCE) micro-interface supported at the tip of a micropipette were presented. The well-defined voltammetric behaviours except Cs⁺ was obtained by cyclic voltammetry and differential pulse voltammetry. The bulk concentration of metal ions was much higher than that of OPEC in the performed measurements. The diffusion coefficient of OPEC in the 1,2-DCE phase was calculated as 5.18 ± 0.70 × 10^? 6 cm² s^? 1. On the basis of the changes of the half-wave transfer potentials, the logarithms of the association constants having 1:1 ionophore–ion complex stoichiometry for Li⁺, Na⁺, K⁺ and Rb⁺ in 1,2-DCE were determined as 4.80, 4.62, 4.98 and 5.32, respectively. The facilitated ion transfers were also evaluated by the Randles equivalent circuit used for ac-impedance data analysis.     

Synthetic Access to New Pyridone Derivatives through the Alkylation Reactions of Hydroxypyridines with Epoxides

General methods for the preparation of a variety of pyridone and oxypyridine derivatives are described. 2‐,3‐,4‐Hydroxy pyridine and 2‐pyridinemethanol were alkylated with ethylene‐, propylene‐, and stryrene‐oxide and epichlorohydrin in the presence of different Lewis acids as a catalyst. The best yield of 3a was achieved in the presence of CdI₂/BF₃ · OEt₂. The corresponding pyridone derivatives (3a–d, 7a–d) were obtained from the reaction of 2‐and 4‐hydroxypyridine with oxiranes in good yields, whereas oxypyridine derivatives (5a–d, 9a,b) were obtained from reactions of 3‐hydroxypyridine and 2‐pyridinemethanol with oxiranes. Chlorohydrines (3d, 5d, 7d) were easily converted to corresponding epoxy derivatives (10, 11, 12) in basic medium; then amino alcohols (13–17) were obtained from the reaction of these epoxy derivatives with amines.     

Synthesis, characterization and some properties of epoxy resins containing azomethine bonding

New epoxy resins were prepared from hydroxyl substituted Schiff base monomers in two steps. The first step is based on the synthesis of hydroxyl substituted Schiff base monomers via condensation reaction. The second step includes the reaction between Schiff base monomers with epichlorohydrine (EPC) to obtain epoxy resins. The structures of resulting compounds were confirmed by FTIR and ¹H-NMR. TG-DTA and DSC measurements were made for thermal characterizations of the compounds. Chemical resistances of the cured epoxy-amine systems in acidic, alkaline and organic solvents were determined for coating applications. HCl (aqueous solution, 10%), NaOH (aqueous solution, 10%), DMSO, DMF, N-methylpyrrolidone, ethanol, THF and acetone were used for corrosion tests. Chemical resistance data show that the synthesized resins have good chemical resistance against various acid, alkaline and common organic solvents.     

Effects on molecular orientation and phase transition of addition of carbon nanotubes into liquid crystalline matrix

For practical guest–host applications, it is important to choose dyes with a high ability of orientation in the liquid crystal (LC) matrix. In this experimental work, two different azo-structured dyes (disperse yellow 3 and 7) were separately doped to each of two different nematic LCs (E7 and ZLI-1132). Their solubilities, textures, phase transition temperatures and order parameters were determined. At the second stage, single-walled carbon nanotubes (SWCNTs) in a small amount were separately added to each of these solutions, and the experiments were repeated as similar to the previous ones. The solubilities of dyes in the LC E7 were lower than those of ZLI-1132. Moreover, the highest order parameter value was attained with yellow 7 dye in ZLI-1132 nematic host. Co-use of nanoparticles (CNTs) as dopant resulted in notable increases in order parameters. These dyes and CNTs did not significantly destabilise the mesomorphic phase of nematic hosts. An appreciable change in textures was not monitored with addition of dopant(s). In addition, it was observed that the narrowing on the temperature range of the LC did not take place with the addition of dopants to the crystal; on the contrary, an increase was recorded.     

Synthesis, characterization, and biological evaluation of new oxime-phosphazenes

Hexachlorocylotriphosphazene (1) was reacted with 4-hydroxy-3-methoxybenzaldehyde to give hexakis[(4-formyl-2-methoxy)phenoxy]cyclotriphosphazene (2). Hexakis[(4-(hydroxyimino)2-methoxy)phenoxy]cyclotriphosphazene (3) was synthesized by reaction of 2 with hydroxlamine hydrochloride in pyridine. Compound 3 was reacted with benzyl chloride, acetyl chloride, allyl bromide, benzoyl chloride, propanoyl chloride, 4-methoxybenzoyl chloride, 2-chlorobenzoyl chloride, chloroacetyl chloride, methyl iodide, and thiophene-2-carbonyl chloride. From these reactions, full or partially substituted compounds were obtained, usually in high yields. Pure or defined products could not be obtained from reaction of 3 with methacryloyl chloride and O-acetylsalicyloyl chloride. The structures of the compounds were determined by elemental analysis, and IR, ¹H, ¹³C, and ³¹P NMR spectroscopy. The synthesized compounds were screened for in-vitro antimicrobial activity against two Gram-positive bacteria (Staphylococcus aureus and Enterococcus faecalis), two gram-negative bacteria (Escherichia coli and Klebsiella pneumonia), and fungal strains (Aspergillus niger, and Candida albicans) by the agar well diffusion method. Few compounds had significant activity against both Gram-positive and Gram-negative bacteria. None of the compounds had antifungal activity except compounds 7 and 9, which had moderate activity.     

Parametric optimization of heat transfer characteristics for helical coils

Journal of Thermal Analysis and Calorimetry - In this study, helically coiled tubes are used in a shell, and the effects of tube diameter, coil diameter, Reynolds number, Dean number and flow rate...     

Novel silver(I)N-heterocyclic carbene complexes bearing 2-(4-hydroxyphenyl)ethyl group: Synthesis,characterization, and enzyme inhibition properties

Herein, novel silver-based N-heterocyclic carbene (NHC) complexes bearing 2-(4-hydroxyphenyl)ethyl group were synthesized. Novel Ag(I)NHC complexes were synthesized from the 2-(4-hydroxyphenyl)ethyl-substituted benzimidazolium salts and silver oxide via in situ deprotonation method. The successful formation of all Ag(I)NHC complexes was proved by using ¹H NMR, ¹³C NMR, FTIR spectroscopy, and elemental analysis techniques. In addition, their inhibitory effects have been investigated of these substances on acetylcholinesterase (AChE), α-glycosidase (α-Gly), human carbonic anhydrase I (hCA I), and human carbonic anhydrase II (hCA II) enzymes. It has been seen that all compounds have a better ability to inhibit compared with existing tried inhibitors. Among these, the best inhibitor against AChE enzyme is 1g (K_i : 9.54 ± 0.98 μM and IC₅₀ : 17.40), and against α-Gly, 1c showed the highest effect (K_i 3.09 ± 0.36 μM and IC₅₀ 7.91). The best inhibitor against hCA I and hCA II enzymes are 1c and 1g compounds. For hCA I and hCA II, IC₅₀ values were calculated as 17.85 and 9.06 μM and K_i values were measured as 5.45 ± 2.02 and 8.99 ± 2.02 μM, respectively.     

Fundamental Characterization,Photophysics and Photocatalysis of a Base Metal Iron(II)-Cobalt(III) Dyad

A new base metal iron-cobalt dyad has been obtained by connection between a heteroleptic tetra-NHC iron(II) photosensitizer combining a 2,6-bis[3-(2,6-diisopropylphenyl)imidazol-2-ylidene]pyridine with 2,6-bis(3-methyl-imidazol-2-ylidene)-4,4′-bipyridine ligand, and a cobaloxime catalyst. This novel iron(II)-cobalt(III) assembly has been extensively characterized by ground- and excited-state methods like X-ray crystallography, X-ray absorption spectroscopy, (spectro-)electrochemistry, and steady-state and time-resolved optical absorption spectroscopy, with a particular focus on the stability of the molecular assembly in solution and determination of the excited-state landscape. NMR and UV/Vis spectroscopy reveal dissociation of the dyad in acetonitrile at concentrations below 1 mM and high photostability. Transient absorption spectroscopy after excitation into the metal-to-ligand charge transfer absorption band suggests a relaxation cascade originating from hot singlet and triplet MLCT states, leading to the population of the ³MLCT state that exhibits the longest lifetime. Finally, decay into the ground state involves a ³MC state. Attachment of cobaloxime to the iron photosensitizer increases the ³MLCT lifetime at the iron centre. Together with the directing effect of the linker, this potentially makes the dyad more active in photocatalytic proton reduction experiments than the analogous two-component system, consisting of the iron photosensitizer and Co(dmgH)₂(py)Cl. This work thus sheds new light on the functionality of base metal dyads, which are important for more efficient and sustainable future proton reduction systems.     

Synthesis and monoamine oxidase A/B inhibitory evaluation of new benzothiazole-thiazolylhydrazine derivatives

Abstract

In this study, a novel series of benzothiazole-thiazolylhydrazine (3a–3i) was synthesized and their structures were characterized by ¹H-NMR, ¹³C-NMR spectrometry, and mass spectroscopy. These compounds were evaluated as inhibitors of type A and type B monoamine oxidase (MAO) enzymes. The most active compound 3b (2-((2-(2-(4-(4-Nitrophenyl)thiazol-2-yl)hydrazineylidene)-2-phenylethyl)thio)benzothiazole) showed strong inhibitory activity at hMAO-A (IC₅₀ of 0.095?±?0.004?µM). Furthermore, compound 3i (2-((2-(2-(4-(2,4-dichlorophenyl)thiazol-2-yl)hydrazineylidene)-2-phenylethyl)thio)benzothiazole) showed significant inhibition profile on hMAO-A with the IC₅₀ values 0.141?±?0.006?µM.